DOI QR코드

DOI QR Code

Evaluation of fiberization of rice hull by autohydrolysis conditons

자기가수분해 조건에 따른 농산부산물 왕겨의 섬유화 특성 평가

  • 이영주 (충남대학교 환경소재공학과) ;
  • 정웅기 (충남대학교 환경소재공학과) ;
  • 성용주 (충남대학교 환경소재공학과)
  • Received : 2011.02.12
  • Accepted : 2011.03.09
  • Published : 2011.03.30

Abstract

In the present study, effects of autohydrolysis treatment on the properties of rice hull were investigated. Two temperature condition such as $160^{\circ}C$ and $180^{\circ}C$ and thee treatment time such as 15 min, 30 min and 45 min were applied for autohydrolysis treatment. The pH of extract after autohydrolysis treatment decreased as increasing of the temperature and the treatment time. The ash content and the lignin content of rice hull were not decreased by the autohydrolysis treatment. The structure of rice hull after autohydrolysis treatment became more weak, the better efficiency of the fiberization with PFI-Mill was shown for the autohydrolysis treated rice hull with the higher temperature and the longer treatment time.

Keywords

References

  1. Park SJ, Kim MH, Shin HM, 2005. Chemical compositions and thermal characteristics of rice husk and rice husk ash in Korea. J. Biosystems Eng. 30(4): 235-241. [in Korean] https://doi.org/10.5307/JBE.2005.30.4.235
  2. Kim HH, Lee JM, Chung MK. 2003. Preparation of activated carbons from rice hull by NaOH and KOH activation. J. Korean Ind. Eng. Chem. 14(4): 381-385.
  3. Yun YK, Kim TY, Yeon IJ, Joung YD, Jeong NH, Nam KD. 1997. A study on the carbonization and removing ash from rice shell. J. Ind. Sci. and Tech. Institute 11(2): 25-30.
  4. Kim YJ, Kang YK, Ryou YS, Kang GC, Paek Y. 2008. Gasification characteristics of rice husks in batch operation. J. Biosystems Eng. 33(4): 248-252. [in Korean] https://doi.org/10.5307/JBE.2008.33.4.248
  5. Kim WT, Nom SY. 1999. Production of carbonized rice husk by a cyclone combustor(2). J. Biosystems Eng. 24(6): 487-492. [in Korean]
  6. Yalcin N, Sevinc V. 2001. Studies on silica obtained from rice husk. Ceramics International 27: 219-224. https://doi.org/10.1016/S0272-8842(00)00068-7
  7. Zhang X, Sun J, Zhuang J, Yang W. 2009. Extraction and characterization of papilla-like biosilica from rice hulls. Chinese J. Chemistry 2(7): 1031-1034.
  8. Ahn BK, Park NH. 1995. Changes in the characteristics of the molded rice hull rice straw packaging material manufactured by different mixing ratios. J. Korea Tappi. 27(2): 55-62. [in Korean]
  9. Lee HH, Han KS. 2000. Study on the optimum pretreatment condition for manufacture of rice hull board, Mokchae Konghak. 28(3): 9-13. [in Korean]
  10. Lee BH, Kim HS, Choi SW, Kim HJ. 2006. Improvement of interfacial adhesion for surface treated rice husk flourfilled polypropylene bio-composites. Mokchae Konghak 34(3): 38-45. [in Korean]
  11. Garrote G, Domıguez H, Parajo JC. 2002. Autohydrolysis of corncob: study of non-isothermal operation for xylooligosaccharide production. Journal of Food Engineering 52: 211-218. https://doi.org/10.1016/S0260-8774(01)00108-X
  12. Cho NS, Kim BR, Paik KH. 2002. Preparation of pure cellulose substrate from low-grade woods by autohydrolysis. Mokchae Konghak 30(4): 8-16. [in Korean]