DOI QR코드

DOI QR Code

Compression strength performance of multi-layer glued columns by using square lumbers produced from domestic small diameter logs

국산 간벌 소경재를 이용한 다중접착접합 기둥부재의 압축강도성능

  • Shin, Il-Joong (Dept. of Bio-based Materials engineering, Chungnam National University) ;
  • Kim, Yun-Hui (Dept. of Bio-based Materials engineering, Chungnam National University) ;
  • Jang, Sang-Sik (Dept. of Bio-based Materials engineering, Chungnam National University)
  • 신일중 (충남대학교 환경소재공학과) ;
  • 김윤희 (충남대학교 환경소재공학과) ;
  • 장상식 (충남대학교 환경소재공학과)
  • Received : 2011.08.16
  • Accepted : 2011.08.19
  • Published : 2011.09.30

Abstract

This study is to develop a mulit-layer glued columns for construction of Korean-style houses by using domestic small diameter logs. Dried small square lumber glued each other to develop a multi-layer glued columns and evaluated its performance of strength. Then, predicted the design load of multi-layer glued columns and make a comparison between actual load and design load of multi-layer glued columns. In the results, allowable load by allowable stress of multi-layer glued columns was measured one-third of actual columns load and prediction load was measured less than 10~30% of the actual load. Therefore, muilt-layer glued member has a standard allowable stress of compressive of 13 MPa (Larix leptolepis) and 19 MPa (Chamaecyparis obtusa) when used as columns. Also, using compression strength of small diameter square logs could calculate maximum loads of multi-layer glued member as column.

Keywords

References

  1. KS. 2007. Softwood structural lumber. In KS F 3020. (in Korean).
  2. KS. 2005. Structural glued-Laminated timber. In KS F 3021. (in Korean).
  3. KS. 2004. Method of compression test for wood. In KS F 2206. (in Korean).
  4. ASTM. 2009. Test methods of static tests of timber in structural sizes. In ASTM D 198-09.
  5. ASTM. 2003. Standard practise for evaluating allowable properties for grades of structural lumber. In ASTM D 2915-03.
  6. Kim KM, Shim SR, Shim KB, Park JS, Kim WS, Kim BN, Yeo HM. 2008. Development of structural glued laminated timber with domestic cedar. Mokchae Konghak 37(3): 184-191.