Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Optimum Shape of Shield Gas Nozzle for Bead Shape Control in TIG Welding using Gas Force (II) - Effect of Molten Metal Control by Venturi Nozzle in Overhead Position -

TIG용접에서 가스력을 이용한 비드형상제어를 위한 실드가스 노즐의 최적 형상에 관한 연구 (II) - 벤투리 노즐의 위보기 자세 용융금속제어 효과 -

  • Ham, Hyo-Sik (Graduate school, Dept. of Materials Processing Eng., Pukyong National Univ.) ;
  • Seo, Ji-Seok (Graduate school, Dept. of Shipbuilding Systems Management Eng., Pukyong National Univ.) ;
  • Choi, Yoon-Hwan (Dept. of Mechanical and Automotive Eng., Pukyong National Univ.) ;
  • Lee, Yeon-Won (Dept. of Mechanical and Automotive Eng., Pukyong National Univ.) ;
  • Cho, Sang-Myung (Div. of Advanced Materials Sci. and Eng,. Pukyong, National Univ.)
  • 함효식 (부경대학교 대학원 소재프로세스공학과) ;
  • 서지석 (부경대학교 대학원 조선시스템 관리공학 협동과정) ;
  • 최윤환 (부경대학교 기계자동차공학과) ;
  • 이연원 (부경대학교 기계자동차공학과) ;
  • 조상명 (부경대학교 신소재공학부)
  • Received : 2010.10.19
  • Accepted : 2011.05.24
  • Published : 2011.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Bead shape control with gas force process has been developed to overcome the concave back bead in pipe orbital welding. However, It is impossible to make a convex back bead using the existing gas nozzle, because it has high gas-consuming and low gas force. The purpose of this paper, to develop optimum shape of nozzle which to reduce the consumption of gas, maximizing the shield gas force with low cost and high productivity coincide the Green welding. In this paper venturi-type nozzle was compared with existing CP-type nozzle by TIG pulse welding in overhead position. As a result, CP-type occurs the wormholes in the overhead position, but the Venturi-type without the pore and formed a good bead appearance.

Keywords

References

  1. Hyo-Won Kim, Sang-Myung Cho : A Study on Back Bead Formation in Inclined-up Position of Plasma Arc Orbital Welding, Journal of KWJS, 27-1 (2009), 71-78 (in Korean) https://doi.org/10.5781/KWJS.2009.27.1.071
  2. Hyo-Sik Ham : Control of Molten Pool by Physical Force of Bead Former in TIG Wedling of Overhead and Inclined-up Position, Journal of KWJS, 28-6 (2010), 629-635 (in Korean)
  3. Ji-Seok Seo, Hyo-Sik Ham, Sung-Bin Im, Jong-Moon Ha, Chang-Hee Son and Sang-Myung Cho : Control of Bead Geometry and Effect of Protection against Wind according to the CDP Gas Nozzle in Arc Welding, Abstracts of the Autumn Annual Meeting of KWJS, 52 (2009), 25 (in Korean)
  4. Yoon-Hwan Choi, Yeon-Won Lee, Ji-Seok Seo, Sang-Myung Cho and Deog-Hee Doh : Visualization of fluid flows in the TIG welding region for different shapes of the shield gas nozzle, Journal of Visualization, Online FirstTM, 30 April 2011 https://doi.org/10.1007/s12650-011-0085-y
  5. P. F. Mendez and T. W. Eagar : Penetration and Defect Formation in high-Current Arc Welding, AWS, Welding Journal, October 2003, 296s-306s