DOI QR코드

DOI QR Code

왕복동식 공기압축기의 소음 발생원 분석 연구

Noise Source Evaluation for Reciprocating Type Air Compressor

  • 이광길 (한국산업안전보건공단 산업안전보건연구원) ;
  • 최승주 (한국산업안전보건공단 산업안전보건연구원)
  • Lee, Kwang-Gil (Occupational Safety and Health Research Institute, KOSHA) ;
  • Choi, Seung-Ju (Occupational Safety and Health Research Institute, KOSHA)
  • 투고 : 2011.04.06
  • 심사 : 2011.08.20
  • 발행 : 2011.08.31

초록

This paper is to investigate noise source for reciprocating type air compressors. The reciprocating type air compressors are widely used in the small and medium sized enterprise and many employees are affected and irritated by their noise during working. The investigation and analysis of the noise source were made according to the ISO 1680/1 and MIL-STD 7410-1 and noise evaluation of each part of compressors was made. Noise emitted from the intake and exhaust valve and the air receiver tank were dominant compared with those from other parts of compressor. Noise from the motor and the revolution of crank mechanism was negligible relatively with the noise sources as mentioned above.

키워드

참고문헌

  1. ISO 1680/1-1986, "Acoustics-test code for the measurement of airborne noise emitted by rotating electrical machinery - Part 1: Engineering method for free-field conditions over a reflecting plane".
  2. MIL-STD-740-1(SH)-1986, "Airborne sound measurements and acceptance criteria of shipboard equipment".
  3. Beranek, Leo L., "Noise and Vibration Control", McGraw-Hill, 1971.
  4. 이정권, "배기소음기의 음향해석 및 설계", 자동차공학회지, 제16권, 제4호, pp. 37-50, 1994.
  5. M. L. Munjal, "Acoustics of Ducts and Mufflers", John Wiley & Sons, Inc., 1987.
  6. 이광길, "왕복동식 공기압축기의 소음저감에 관한 공학적 대책 연구", 한국안전학회지, 제21권, 제5호, pp. 12-16, 2006.