Journal of the Korean Society of Safety (한국안전학회지)

The Korean Society of Safety (한국안전학회)
권호 표지
DOI QR코드

DOI QR Code

Forensic Engineering Study on the Explosion Accident Investigation of the Centrifugal Casting Machine Using ADINA FSI

ADINA FSI를 활용한 원심주조기 폭발사고 원인 규명에 관한 법공학적 연구

  • Received : 2011.04.07
  • Accepted : 2011.08.03
  • Published : 2011.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

Forensic Engineering is the area covering the investigation of products, structures that fail to perform or do not function as intended, causing personal injury or damage to property. To investigate explosion accident of the centrifugal casting machine in terms of the forensic engineering, in this paper, the computing simulation using ADINA FSI has performed to investigate that the effect of the Check-Pin fracture by the flow phenomena and molten metal weight and the mechanical properties test of the accident Check-Pin has performed using the instrumented indentation technique. Through these studies, the safety accident that may occur in centrifugal casting machine can be minimized by performing specialized and systematic investigation of the accident cause in terms of the forensic engineering.

Keywords

References

  1. Sam, B., "Forensic engineering : Reduction of risk improving technology", Engineering Failure Analysis, Vol. 14, pp. 1019-1037, 2007. https://doi.org/10.1016/j.engfailanal.2006.11.065
  2. Brian, H., Mohamed, T. K., "Non-destructive testing techniques for the forensic engineering investigation of reinforced concrete buildings", Forensic Science International, Vol. 167, pp. 167-172, 2007. https://doi.org/10.1016/j.forsciint.2006.06.065
  3. Kim, K. H., Choi, Y., Kim, S. H., Lee, J. S.. Kwon, D. I., "Application of Instrumented Indentation Technique for Nondestructive/Mechanical Properties Measurement of In-Service, Components and Materials", Spring conference of KSME, pp. 336-343, 2005.
  4. Kim, S. H., Choi, Y., Kwon, D. I., "Determination of Brinell Hardness through Instrumented Indentation Test without Observation of Residual Indent", KSME, Vol. 28, No. 5, pp. 578-585, 2004.
  5. Jeon, E. C., Kwon, D. I., Park, J. S., "The Optimization of Advanced Indentation Test for Tensile Properties Derivation", Spring conference of KSME, pp. 355-360, 2002.