Real-Time Source Classification with an Waveform Parameter Filtering of Acoustic Emission Signals

음향방출 파형 파라미터 필터링 기법을 이용한 실시간 음원 분류

  • Cho, Seung-Hyun (Center for Safety Measurement, Division of Industrial Metrology, Korea Research Institute of Standards and Science) ;
  • Park, Jae-Ha (Center for Safety Measurement, Division of Industrial Metrology, Korea Research Institute of Standards and Science) ;
  • Ahn, Bong-Young (Center for Safety Measurement, Division of Industrial Metrology, Korea Research Institute of Standards and Science)
  • 조승현 (한국표준과학연구원 안전측정센터) ;
  • 박재하 (한국표준과학연구원 안전측정센터) ;
  • 안봉영 (한국표준과학연구원 안전측정센터)
  • Received : 2011.01.18
  • Accepted : 2011.04.07
  • Published : 2011.04.30

Abstract

The acoustic emission(AE) technique is a well established method to carry out structural health monitoring(SHM) of large structures. However, the real-time monitoring of the crack growth in the roller coaster support structures is not easy since the vehicle operation produces very large noise as well as crack growth. In this investigation, we present the waveform parameter filtering method to classify acoustic sources in real-time. This method filtrates only the AE hits by the target acoustic source as passing hits in a specific parameter band. According to various acoustic sources, the waveform parameters were measured and analyzed to verify the present filtering method. Also, the AE system employing the waveform parameter filter was manufactured and applied to the roller coaster support structure in an actual amusement park.

음향방출기법은 대형 구조물의 구조건전성감시(SHM)를 위한 매우 효율적인 방법이지만, 롤러코스터 지지구조물처럼 승용물의 운행으로 인한 매우 큰 잡음이 일상적으로 존재하는 경우에는 균열 진전 신호만을 분류하여 실시간 감시를 수행하기가 쉽지 않다. 이와 같은 문제의 해결을 위해 본 연구에서는 실시간으로 음원의 분류가 가능한 파형 파라미터 필터링 기법을 제안하였다. 파형 파라미터 필터링 기법은 음향방출 신호의 파형 파라미터를 이용하여 음향방출 히트를 사전에 필터링함으로써 실시간으로 감시하고자 하는 대상 음원만을 분류해내는데 매우 유리한 점이 있다. 다양한 음원에 대해 음향방출 파형 파라미터를 측정 및 분석하여 제안한 기법의 타당성을 살펴보았다. 또한 파형 파라미터 필터가 내장된 음향 방출 시스템을 구축하고 이를 실제 롤러코스터 지지구조물에 적용하여 실시간 균열진전 감시를 위한 가능성을 타진하였다.

Keywords

Acknowledgement

Supported by : 소방방재청

References

  1. D. Parrt, "Nondestructive flaw detection by use of acoustic emission," IDO-17230, Phillips Petroleun Co., Idaho falls, ID (1967)
  2. C. Ennaceur, "Monitoring crack growth in pressure vessel steels by the acoustic emission technique and the method of potential difference," International Journal of pressure Vessels and Piping, Vol. 83, pp. 197-204 (2006) https://doi.org/10.1016/j.ijpvp.2005.12.004
  3. N. Ohtsuka, M. Nakano and H. Ueyama, "Acoustic emission monitoring during rupture test of pressure vessels and laboratory fracture test," Journal of Pressure Vessel Technology, Vol. 103, pp. 191-199 (1981) https://doi.org/10.1115/1.3263386
  4. M. Houssny-Emam and M. N. Bassim, "Study of the effect of heat treatment on low cycle fatigue in 4340 steel by acoustic emission," Materials Science and Engineering, Vol. 61, pp. 79-88 (1983) https://doi.org/10.1016/0025-5416(83)90128-3
  5. 김정희, 한병희, 서대철, 윤동진, "철근 콘크리트 슬래브 구조 손상 평가를 위한 음향방출 신호 분석", 비파괴검사학회지, Vol. 29, No. 4, pp. 360-367 (2009)
  6. 김영훈, 김진현, 송봉민, 이준현, 조윤호, "음향방출기법을 이용한 원전 고온 고압 배관의 누설 특성 평가에 관한 연구", 비파괴검사학회지, Vol. 29, No. 5, pp. 466-472 (2009)
  7. 김종현, 김재성, 이정, 곽노권, 이보영, "원전 구조물 결함탐지를 위한 음향방출 신호처리 방안에 대한 기초 연구", 비파괴검사학회지, Vol. 29, No. 5, pp. 485-492 (2009)
  8. 이상국, "음향방출을 이용한 발전용 밸브 누설 진단 현장 적용 연구", 비파괴검사학회지, Vol. 28, No. 4, pp. 315-322 (2008)
  9. C. Ouyang, E. Landis and S. P. Shah, "Damage assessment in concrete using quantitative acoustic emission," Journal of Engineering Mechanics, Vol. 117, No. 11, pp. 2681-2689 (1991) https://doi.org/10.1061/(ASCE)0733-9399(1991)117:11(2681)
  10. S. Yuyama, T. Okamoto, M. Shigeishi and M. Ohtsu, "Quantitative evaluation and visualization of cracking process in reinforced concrete by moment tensor analysis of acoustic emission," Materials Evaluation, Vol. 53, No. 6, pp. 751-756 (1995)
  11. R. K. Miller and P. Mclntire, Nondestructive Testing Handbook, Second Edition, Vol. 5, Acoustic Emission Testing, American Society for Nondestructive Testing (1987)