Journal of the Korea Institute of Information and Communication Engineering (한국정보통신학회논문지)

The Korea Institute of Information and Commucation Engineering (한국정보통신학회)
권호 표지
DOI QR코드

DOI QR Code

Design and Implementation of the Electromagnetic Adaptive RFID Tag in 900MHz

전파 적응형 900MHz 수동형 RFID 태그 설계 및 구현

  • Received : 2011.01.24
  • Accepted : 2011.02.13
  • Published : 2011.05.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, an adaptive RFID tag antenna in 900MHz for using in inadequate electromagnetic environment is designed and implemented. The dimension of the proposed passive tag is $102mm{\times}102mm{\times}9mm$, the operating frequency band is 908~914MHz and the detection range is 5.1m. This paper describes the development of the thermal, water and impact resisting tag. The implemented tag can be used for the inadequate environment such as in-built tag on the ground for the car management service.

본 논문에서는 열약한 전파 환경에서 동작하는 전파 적응형 900MHz 수동형 RFID 태그를 설계하고 구현하였다. 수동형 태그의 크기는 $102mm{\times}102mm{\times}9mm$이며, 동작주파수는 908~914MHz이고 인식거리는 5.1m이다. 본 논문에서 구현한 수동형 RFID 태그는 내열성 내방수성 내충격성의 특징을 가지고 있어서 특히 자동차관리를 위한 매립형과 같은 열악한 환경에서 우수한 성능을 보인다.

Keywords

References

  1. K. Finkenzeller, RFID handbook, 2nd edition, John Wiley & Sons, England, 2003
  2. H.-W Son and C.-S Pyo "Design of RFID tag antenna using an inductively coupled feed," Electron. Lett., vol. 41, pp. 994-996, September 2004.
  3. H. Choo, and H. Ling, " Design of electrically small planar antennas using inductively coupled feed," Electron. Lett., vol. 39, pp. 1563-1565, October 2004.
  4. H. Furuuchi, H. Morishita, H. Ide, Z. Tanaka, and K. Fujimoto, "A balance-fed loop antenna system for handsets," IEEE Antennas and Propagation Society International Symposium, vol. 1, pp. 6-9, July 1999.
  5. K. Ogawa, H. Iwai, and Y. Koyanagi, "A balance-fed planar built-in antenna," Antenna and Propagation and EM Theory, ISAPE 2000. 5th International Symposium, pp. 680-683, 2000.
  6. H.-W Son, G.-Y Choi, and C.-S Pyo "Design of widebnad RFID tag antenna for metallic surfaces," Electron. Lett., vol. 42, pp. 263-265, March 2006. https://doi.org/10.1049/el:20064323
  7. L. Ukkonen, L. Sydanheimo, and M. Kivikoski, "Effects of metallic plate size on the performance of microstrip patch-type tag antennas for passive RFID," IEEE/Antennas and Wireless Propagation Letters, vol. 6, pp. 518-520, 2007. https://doi.org/10.1109/LAWP.2007.909962
  8. P. Raumonen, L. Sydanheimo, L. Ukkonen, M. Keskilammj, and M. Kivikoski, "Folded Dipole Antenna Near Metal Plate," 2003 IEEE International Antennas and Propagation Symposium, June 2003.
  9. L. Ukkonen, L. Sydanheimo, and M. Kivikoski, "A Novel Tag Design Using inverted-F Antenna for Radio Frequency Identification of Metallic Objects," IEEE/Sarnoff Symposium., pp. 91-94, April 2004.
  10. M. Huynh and W. Stutzman, "Ground plane effects on planar inverted-F antenna performance," IEE Porceedings. Microwaves, Antenna and Propagation., vol. 150, pp. 209-213, Augus 2003.
  11. 에일리언사의 힉스3 SOT-323 패키지 IC
  12. J.S. Jung, J.S. Lee, K. Lee, J.M. Yang, "900 MHz Common RFID Label Tag Impedance Analysis Using Produced Prove Station," 2010 Winter Symposium, Korean Information and Communications Society, Vol. 41, pp.165, Feb. 2010.