한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제20권3호
  • /
  • Pages.239-244
  • /
  • 2011
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

불도저의 구조해석에 의한 내구성 연구

Study on Durability by Structural Analysis of Bulldozer

  • 한문식 (계명대학교 기계자동차공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • 투고 : 2011.03.16
  • 심사 : 2011.05.04
  • 발행 : 2011.06.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study analyzes the behaviors on stress, fatigue and vibration about bulldozer in operation. Maximum equivalent stress is shown with the frequency of 100 Hz in case of the harmonic vibration analysis applied with force. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample history' with the average stress of 0 to -105MPa and the amplitude stress of 0 to $1.617{\times}105MPa$, the possibility of maximum damage becomes 3.23%. This stress state can be shown with 5 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. The structural result of this study can be effectively utilized with the design of bulldozer by investigating prevention and durability against its damage.

키워드

참고문헌

  1. Sohn, I. S., and Lee, J. G., 2008, "A Study of Electrical Control Kit for Damping Force of Automotive Shock Absorber," Transactions of KSAE, Vol. 16, No. 3, pp. 1-6.
  2. Shin, O. C., Jung, S. R., Chung, W. J., Kim, J. M., and Park, S. S., 2004, "Development Portable Measurement System for Property Test of Manual Transmission Car," Proceeding of the KSMPE Spring Conference 2009, pp. 221-224.
  3. Jeong, S. H., Kim, J. Y., and Na, Y. C., 2001, "Dynamic Characteric Analysis of Tilting Turret Systems Using Finite Element Modelling," Transactions of KSMTE, Vol. 10, No. 5, pp. 60-70.
  4. Lee, S. P., Kang, K. W., Chang, S. M., and Lee, J. H., 2011, "Structural Design for 2 kW Class Wind Turbine Blade by using Design of Experiment," KSMTE, Vol. 20, No.1, pp. 28-33.
  5. Swanson, John., 2009, AUTODYN 12.0, ANSYS Inc., USA.
  6. Park, T. K., Kim, M. K., and Won, J. H., 2010, "Construction Stage Analysis of Hybrid Composite Cable- Stayed Girder Bridge Using Eccentrically Loaded Derrick Crane," The Magazine of the Korean Society of Civil Engineers, Vol. 30, No. 3, pp. 277-286.
  7. Kim, Y. S., Cho, J. K., Kim, M. J., Cho, K. M., and Hyun, C. T., 2010, "A Productivity Analysis of Tower Crane Installation Progress Based on Simulation Technique," Journal of the Korea Institute of Building Construction, Vol. 10, No. 2, pp. 33-40. https://doi.org/10.5345/JKIC.2010.10.2.033
  8. Seong, S. H., Lee, J. M., Lee, M. J., Kim, D. K., Yoon, S. H., 2006, "Pressure Model Test of Container Crane," Journal of the Wind Engineering Institute of Korea, Vol. 10, No. 1, pp. 109-118.