고로슬래그를 사용한 무시멘트 알칼리 활성 모르타르의 유동성과 압축강도

Flowability and Compressive Strength of Cementless Alkali-Activated Mortar Using Blast Furnace Slag

  • 고경택 (한국건설기술연구원 구조교량연구실) ;
  • 류금성 (한국건설기술연구원 구조교량연구실) ;
  • 이장화 (한국건설기술연구원 구조교량연구실) ;
  • 강현진 ((주)삼표 혼화제 사업부) ;
  • 전용수 ((주)삼표 혼화제 사업부)
  • Koh, Kyung-Taek (Structural Engineering & Bridge Research Division, Korea Institute of Construction Technology) ;
  • Ryu, Gum-Sung (Structural Engineering & Bridge Research Division, Korea Institute of Construction Technology) ;
  • Lee, Jang-Hwa (Structural Engineering & Bridge Research Division, Korea Institute of Construction Technology) ;
  • Kang, Hyun-Jin (Admixture Division, SAMPYO Corporation) ;
  • Jeon, Yong-Su (Admixture Division, SAMPYO Corporation)
  • 투고 : 2011.03.07
  • 심사 : 2011.03.31
  • 발행 : 2011.03.31

초록

포틀랜드 시멘트 제조 시 다량의 이산화탄소를 배출함으로써 많은 문제가 발생하고 있다. 그리고 화력발전소 및 제철소의 산업부산물인 플라이애쉬 및 고로슬래그는 시멘트와 일부 대체하여 콘크리트로 일부 재활용되고 있으나, 42% 정도를 해안 및 육상에 매립함으로써 환경적인 문제를 유발하고 있다. 최근 결합재로 시멘트를 사용하지 않은 알칼리 활성 콘크리트에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 시멘트를 전혀 사용하지 않고 결합재로서 고로슬래그 미분말를 사용한 무시멘트 알칼리 활성 콘크리트를 개발할 목적으로 유동성과 압축강도 측면에서 알칼리 활성화제와 고성능 감수제에 대해 검토에 대해 검토하였다. 그 결과, 알칼리 활성화제의 종류 및 혼합비율, 고성능 감수제의 종류, 투입순서 등은 고로슬래그를 사용한 알칼리 활성 모르타르의 유동성과 압축강도에 큰 영향을 주는 것으로 나타났다. 고로슬래그 무시멘트 알칼리 활성 모르타르를 제조하는데, 9M NaOH과 분말형 쇼듐실리케이트를 1:1의 비율로 제조한 알칼리 활성화제를 사용하고, 고성능 감수제를 먼저 투입한 경우에는 1시간 동안 플로우 180 mm의 유동성과 $20^{\circ}C$의 상온양생조건에서 재령 28일에서 압축강도 50 MPa를 확보할 수 있는 것으로 나타났다.

Portland cement production is under critical review due to high amount of $CO_2$ gas released to the atmosphere. Attempts to increase the utilization of a by-products such as fly ash and ground granulated blast-furnace slag to partially replace the cement in concrete are gathering momentum. But most of by-products is currently dumped in landfills, thus creating a threat to the environment. Many researches on alkali-activated concrete that does not need the presence of cement as a binder have been carried out recently. In this study, we investigated the influence of alkali activator and superplasticizer on the flowability and compressive strength of the alkali-activated mortar in oder to develop cementless alkali-activated concrete using blast furnace slag. In view of the results, we found out that the type and mixture ratio of alkali activator, the type and adding order of superplasticizer results to be significant factors. When cementless alkali-activated mortar using blast furnace slag manufactured with 1:1 the mass ratio of 9M NaOH and sodium silicate, and added superplasticizer before alkali activator in the mixer, we can be secured workability with 180 mm of flow during 1 hours and compressive strength of about 50 MPa under $20^{\circ}C$ curing condition at age of 28days.

키워드