The Transactions of The Korean Institute of Electrical Engineers (전기학회논문지)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지
DOI QR코드

DOI QR Code

Buck-Type Charging Method for Loss Reduction of Multi-Function Inverter

다기능 인버터의 손실저감을 위한 Buck-Type 충전기법

  • 김동희 (성균관대학교 정보통신공학부 전자전기컴퓨터공학과) ;
  • 우동균 (성균관대학교 정보통신공학부 전자전기컴퓨터공학과) ;
  • 이병국 (성균관대학교 정보통신공학부)
  • Received : 2011.05.12
  • Accepted : 2011.07.13
  • Published : 2011.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes buck-type charging method using motor inductance, 3-phase inverter and bi-directional converter without an additional charger in plug-in hybrid electric vehicles. The proposed system has advantages over the conventional system such as high charging efficiency, high power factor, and low total harmonic distortion. The validity of each methods are verified by theoretical analysis and simulation.

Keywords

References

  1. ExxonMobil Corporation, "Outlook for Energy: A View to 2030," [Online]. Available: http://www.exxonmobil.com/energyoutlook.
  2. J. S. Kim, G. Y. Choe, H, M. Jung, B. K. Lee, Y. J. Cho, and K. B. Han, "Design and implementation of a high-efficiency on-board battery charger for electric vehicles with frequency control strategy," IEEE Vehicular Power and Propulsion Conference (VPPC 2010), Sep. 1-3, 2010.
  3. 홍정표, 허진, "차세대 자동차용 전동구동 시스템 개발 동향," 대한전기학회, 전기의세계, Vol. 59, No. 9, pp. 20-29, Sep. 2010.
  4. 김종수, 최규영, 정혜만, 이병국, 조영진, "전기자동차용 3.3kW 탑재형 배터리 충전기 설계 및 제작," 전력전자학회 논문지, Vol. 15, No. 2, pp. 369-375, 2010.
  5. L. Solero, "Nonconventional on-board charger for electric vehicle propulsion batteries," IEEE Trans. Veh. Tech., Vol.50, No. 1, pp. 144-149, Jan. 2001. https://doi.org/10.1109/25.917904
  6. L. Tang and G. J. Su, "A low-cost, digitally-controlled charger for plug-in hybrid electric vehicles," IEEE ECCE, Conf., pp.3923-3929, Sept. 2009.
  7. S.-K. Sul and S.-J. Lee, "An integral battery charger for four-wheel drive electric vehicle," IEEE Trans. Ind. Appl., Vol. 31, No. 5, pp. 1096-1099, Sep./Oct. 1995. https://doi.org/10.1109/28.464524
  8. Laszlo Huber, Liu Gang, Milan M. Jovanovic "Design-oriented analysis and performance evaluation of buck PFC front end," IEEE Trans. on power electronics, Vol. 25, No. 1, pp. 85-94, Jan. 2010. https://doi.org/10.1109/TPEL.2009.2024667
  9. 우동균, 최규영, 김종수, 이병국, 강구배, "인버터 및 모터 인덕턴스를 이용한 PHEV 배터리 충전 기법," 전력전자학회 추계학술대회, pp. 335-336, 2010.
  10. 우동균, 최규영, 이병국, "IPM모터를 이용한 PHEV 충전기법 문제점 분석," 대한전기학회 춘계학술대회, pp. 283-285, 2011.