방파제 축조공사의 Centrifuge 모델링과 수치해석

Centrifuge Modeling and Numerical Analysis on Breakwater Construction

  • 유남재 (강원대학교 토목공학과) ;
  • 김동건 (강원대학교 대학원 토목공학과) ;
  • 윤대희 (강원대학교 대학원 토목공학과)
  • 발행 : 2011.08.31

초록

Centrifuge modeling and numerical analysis on works of breakwater construction were performed to investigate the behavior of caisson type of breakwater and foundation treated with the method of DCM (Deep Cement Mixing) under the condition of wave action in field. In centrifuge modeling, construction sequence of breakwater caisson such as preparation of ground, treatment of DCM, installation of rubble mound, placement of breakwater caisson and lateral loading on the breakwater due to wave action were reconstructed. Lateral movement of model breakwater and ground reaction in the vertical direction were monitored during test. Stress concentration ratio between the untreated ground and the treated ground with DCM was evaluated from measurement of vertical stresses on each ground. Numerical analysis with the software of PLAXIS was carried to compare with Results of centrifuge model test. It was found that stability of model breakwater was maintained during stage of construction and the compared results about stress concentration ratio were in relatively good agreements.

키워드