DOI QR코드

DOI QR Code

에너지 효율분석을 통한 DC 마이크로그리드의 타당성 검토

A Feasibility Study on DC Microgrids Considering Energy Efficiency

  • 투고 : 2011.07.20
  • 심사 : 2011.08.23
  • 발행 : 2011.09.01

초록

More than 80% of electric loads need DC electricity rather than AC at the moment. If DC power could be supplied directly to the terminal loads, power conversion stages including rectifiers, converters, and power adapters can be reduced or simplified. Therefore, DC microgrids may be able to improve energy efficiency of power distribution systems. In addition, DC microgrids can increase the penetration level of renewable energy resources because many renewable energy resources such as solar photovoltaic(PV) generators, fuel cells, and batteries generate electric power in the form of DC power. The integration of the DC generators to AC electric power systems requires the power conversion circuits that may cause additional energy loss. This paper discusses the capability and feasibility of DC microgrids with regard to energy efficiency analysis through detailed dynamic simulation of DC and AC microgrids. The dynamic simulation models of DC and AC microgrids based on the Microgrid Test System in KEPCO Research Institute are described in detail. Through simulation studies on various conditions, this paper compares the energy efficiency and advantages of DC and AC microgrids.

키워드

참고문헌

  1. R.H. Lasseter, "Control and Design of Microgrid Components," PSERC Final Report, Jan. 2007.
  2. N. Hatziargyriou, H. Asano, R. Iravani, and C. Marnay, "Microgrids," IEEE power & energy magazine, pp.78-94, Jul./Aug. 2007.
  3. F. Katiraei, M.R. Iravani, "Power management strategies for a Microgrid with multiple distributed generation units," IEEE Trans. Power Systems, vol. 21, no. 4, pp.1821-1831, Nov. 2006. https://doi.org/10.1109/TPWRS.2006.879260
  4. I. Chung, W. Liu, D. Cartes, E. Collins, and S. Moon "Control Methods for Multiple Distributed Generators in a Microgrid System," IEEE Trans. Industry Applications. Vol.46, no.3, May/June 2010.
  5. M.E. Baran and N.R. Mahajan, "DC distribution for industrial systems: opportunities and challenges," IEEE Trans. on Industry Applications, vol. 39, issue 6, Nov-Dec. 2003, pp. 1596-1601. https://doi.org/10.1109/TIA.2003.818969
  6. A. Sannino, G. Postiglione, and M.H. Bollen, "Feasibility of a DC Network for Commercial Facilities," IEEE Trans. on Industry Applications, vol. 39, no. 5, Sep-Oct. 2003, pp. 1499-1507. https://doi.org/10.1109/TIA.2003.816517
  7. Y. Ito, Y. Zhongqing, and H. Akagi, "DC Microgrid Based Distribution Power Generation System," IPEMC 2004.
  8. N. Rasmussen, and J. Spitaels, "A Quantitative Comparison of High Efficiency AC vs. DC Power Distribution for Data Centers," White Paper 127, APC by Schneider Electric.
  9. P. Savage, R.R. Nordhaus, and S.P. Jamieson, "DC Microgrids: Benefits and Barriers,"From Silos to Systems: Issues in Clean Energy and Climate Change, 2010.
  10. H. Pang, E. Lo, and B. Pong, "DC Electrical Distribution Systems in Buildings" ICPESA 2006
  11. H. Kakigano, M. Nomura, and T. Ise, "Loss Evaluation of DC Distribution for Residential Houses Compared with AC System," IEEE IPEC 2010
  12. M. Starke, L.M. Tolbert, B. Ozpineci, "AC vs. DC Distribution: A Loss Comparison" IEEE T&D 2008
  13. 이준신, 김경해, 태양전지공학, 그린, 2008
  14. Y. Ji, J. Kim, S. Park, J. Kim, and C. Won, "C-language based PV array simulation technique considering effects of partial shading," IEEE International Conference on Industrial Technology 2009, Feb. 2009.

피인용 문헌

  1. Voltage and Frequency Control Method Using Battery Energy Storage System for a Stand-alone Microgrid vol.64, pp.8, 2015, https://doi.org/10.5370/KIEE.2015.64.8.1168