DOI QR코드

DOI QR Code

Stabilization of Wet Foams for Porous Ceramics Using Amphiphilic Particles

  • Pokhrel, Ashish (Institute of Processing and Application of Inorganic Materials, (PAIM) Department of Advanced Materials Science and Engineering, Hanseo University) ;
  • Park, Jung-Gyu (Institute of Processing and Application of Inorganic Materials, (PAIM) Department of Advanced Materials Science and Engineering, Hanseo University) ;
  • Nam, Jeong-Sic (Institute of Processing and Application of Inorganic Materials, (PAIM) Department of Advanced Materials Science and Engineering, Hanseo University) ;
  • Cheong, Deock-Soo (Fine Micell Industries Co. Ltd.) ;
  • Kim, Ik-Jin (Institute of Processing and Application of Inorganic Materials, (PAIM) Department of Advanced Materials Science and Engineering, Hanseo University)
  • Received : 2011.08.18
  • Accepted : 2011.08.25
  • Published : 2011.09.30

Abstract

Wet foams formed through direct foaming were stabilized using various concentrations of amiphiphilic particles that could control pore size and porosity. These porous materials showed moderate strength upon compression with high porosity. Bubble size and wet foam stability were tailored by amphiphile concentration, particle concentration, contact angle, and pH of the suspension to obtain crack-free porous solid after sintering. Closed and open pores were obtained with sizes of 30~300 ${\mu}m$ and porosities of over 80%.

Keywords

References

  1. Andre R. Studart, Urs T. Gonzenbach, Elena Tervoort, and Ludwig J. Gauckler, "Processing Routes to Macroporous Ceramics: A Review," J. Am. Ceram. Soc., 89 [6] 1771-89 (2006). https://doi.org/10.1111/j.1551-2916.2006.01044.x
  2. I. H. Song, M. J. Park, H. D. Kim, Y. W. Kim, and J. S. Bae, "Microstructure and Permeability Property of Si Bonded Porous SiC with Variation in the Carbon Content," (in Korean) J. Kor. Ceram. Soc., 47 [6] 546-52 (2010). https://doi.org/10.4191/KCERS.2010.47.6.546
  3. U. T. Gonzenbach, A. R. Studart, D. Steinlin, E. Tervoort, and L.J.Gauckler, "Processing of Particle-Stabilized Wet Foams into Porous Ceramics," J. Am. Ceram. Soc., 90 [11] 3407-14 (2007). https://doi.org/10.1111/j.1551-2916.2007.01907.x
  4. B. P. Binks, "Particles as Surfactants- Similarities and Differences," Curr. Opin. Colloid Interface Science., 7 21-41 (2002). https://doi.org/10.1016/S1359-0294(02)00008-0
  5. Brent S. Murray, "Stabilization of Bubbles and Foams," Curr. Opin. Colloid Interface Science., 12 231-41(2007).
  6. Timothy N. Hunter, Robert J. Pugh, George V. Franks, and Graeme J. Jameson, "The Role of Particles in Stabilizing Foams and Emulsions," Adv. Colloid Interface Science., 137 57-81(2008) https://doi.org/10.1016/j.cis.2007.07.007
  7. Andre R.Studart, Urs T. Gonzenbach, IIke Akartuna, Elena Tervoort, and Ludwig J. Gauckler, "Materials from Foams and Emulsions Stabilized by Colloidal Particles", J. Mater. Chem., 17 3283- 89 (2007). https://doi.org/10.1039/b703255b
  8. U. T. Gonzenabach, A. R Studart, E. Tervoort, and L. J. Gauckler, "Stabilization of Foams with Inorganic Colloidal Particles," Langmuir., 22 10983-988 (2006). https://doi.org/10.1021/la061825a
  9. U. T. Gonzenbach, A. R. Studart, E. Tervoort, and L. J. Gauckler, "Macroporous Ceramics from Particle-Stabilized Wet Foams," J. Am. Ceram. Soc., 90 [1] 19-22 (2007).

Cited by

  1. Effect of Additive Ball Clay on Physical Properties of Porous Ceramic vol.36, pp.2, 2014, https://doi.org/10.4491/KSEE.2014.36.2.109
  2. Content on Wet-foam Stability for Creation of Porous Ceramics vol.51, pp.5, 2014, https://doi.org/10.4191/kcers.2014.51.5.511
  3. Wet Foam Stabilized by Amphiphiles to Tailor the Microstructure of Porous Ceramics vol.512, pp.None, 2011, https://doi.org/10.4028/www.scientific.net/kem.512-515.288
  4. Processing of Porous Ceramics by Direct Foaming: A Review vol.50, pp.2, 2011, https://doi.org/10.4191/kcers.2013.50.2.093
  5. Micro porous SiO2–SiC ceramics from particle stabilized foams by direct foaming vol.123, pp.1437, 2011, https://doi.org/10.2109/jcersj2.123.378
  6. Preparation of ceramic foam spheres by injection molding of emulsions vol.8, pp.1, 2011, https://doi.org/10.1080/21870764.2019.1695558
  7. Closed porosity ceramics and glasses vol.103, pp.5, 2020, https://doi.org/10.1111/jace.16934