Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Study on Vibration Induced by Fluid at a Water Pressure Reducing Valve through Structure-Fluid Coupled Analysis

구조-유체 연성해석을 통한 수도용 감압밸브에서의 유체유발진동에 관한 연구

  • Received : 2012.08.28
  • Accepted : 2012.10.11
  • Published : 2012.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the structure-fluid coupled analysis is carried out in order to examine the cause of the vibration induced by fluid in the pressure-reducing valves for water. It is confirmed that there is the noise at the area of low frequency of 250Hz by measuring noise at pressure reducing valve. The flow analysis is performed by the commercial software ANSYS/CFX. The flow velocity of about 40 m/s is formed by nozzle effect, and so negative pressure is happened in the pressure reducing valve. The structure analysis is carried out with the load condition of pressure distribution by flow formed in valve. The rubber material at disk is deformed to the extent of closing up flow passage. It is confirmed that the disc deformation which is occurred repeatedly is due to noise and vibration at the pressure reducing valve.

본 논문에서는 수도용 감압밸브에서의 유체유발진동의 원인을 파악하기 위한 위하여 구조-유체 연성 해석을 수행하였다. 감압밸브의 소음을 측정한 결과 250Hz의 저주파 대역의 소음이 있음을 확인하였다. 상용 소프트웨어인 ANSYS/CFX를 사용하여 유체의 유동 해석을 수행한 결과, 감압밸브 내에서 노즐 효과에 의하여 40m/s 정도의 유속이 형성되고, 이에 따라 감압밸브 내에 부압이 발생하였다. 밸브 내에 형성된 유동에 의한 압력 분포를 하중 조건으로 구조해석을 한 결과, 유로를 막을 수 있을 정도의 고무 재질인 디스크의 변형이 발생하였다. 이러한 디스크의 변형이 반복적으로 일어남으로써 소음진동현상이 발생함을 확인하였다.

Keywords

References

  1. S. W. Park, "Water Pressure Reducing Valve - Structure and Characteristic of Application", Magazine of the Society of Air-Conditioning and Refrigerating Engineering of Korea, Vol. 24, No. 5, pp.530-538, Oct., 1995.
  2. K. Ch. An, "Principle of pressure reducing in cold water piping system", opinion article in the academic lectures of the Society of Air-Conditioning and Refrigerating Engineering of Korea, pp.1-6, May, 2001.
  3. H. Y. Kim, "The characteristic applications of water pressure reducing valves", opinion article in the academic lectures of the Society of Air-Conditioning and Refrigerating Engineering of Korea, pp.53-67, May, 2001.
  4. K.U. Yang and I. Y. Lee, "A modeling of Proportional Control Valve and its Control", J. of the Korea Society For Power System Engineering, Vol. 6, No. 3, pp. 71-77, Aug., 2002.
  5. S. N. Yun, Y. B. Ham and J. D. Jo, "Pressure Control Characteristics of Proportional Pressure Reducing Valve", J. of the Korea Society For Power System Engineering, Transactions of the KSAE, Vol. 7, No. 1, pp.68-73, Feb. 2003.
  6. Y. S. Hong, S. B. Ryu, Y. S. Kim, "Development of a Direct-Operated Proportional Pressure Reducing Valve for Low-Band Type Active Suspension Control", Vol. 2, No. 3, pp.75-84, 1994.
  7. Park J. H., Rhee K. N., Cha M. C., Yeo M. S., Kim K. W., "A Study on the Prevention of Cavitation for Pressure Reducing Valves in Residential Buildings", Proc. of the Korean Institute of Architectural Sustainable Environment and Building Systems Spring conference, pp. 260-264, March, 2010.
  8. A. T. An, K. Y. Kim, "Analysis of Flow through High Pressure Bypass Valve in Power, Plant", J. of Fluid Machinery, No. 45, pp.17-23, December, 2007.
  9. H. W. U, G. M. Hwan, Y. B. Seog, "Cavitation Condition Monitoring of Butterfly Valve Using Support Vector Machine", Transactions of the Korean Society for Noise and Vibration Engineering, Vol.14, No.2, pp.119-127, 2004. https://doi.org/10.5050/KSNVN.2004.14.2.119
  10. J. W. Seo, "CFX Practice Guide for Cavitation", ANZINE, 2011/2012 Winter pp.52-53, 2012.

Cited by

  1. Critical-speed Increase of Optical Disk by Applying Residual Stresses vol.14, pp.5, 2013, https://doi.org/10.5762/KAIS.2013.14.5.2092
  2. Structure Improvement and New Product Development of Valve Tester vol.28, pp.2, 2016, https://doi.org/10.13000/JFMSE.2016.28.2.350
  3. Behavior Analysis of Small Size Elevator Brake vol.28, pp.2, 2016, https://doi.org/10.13000/JFMSE.2016.28.2.401