Journal of the Korean Society of Food Science and Nutrition (한국식품영양과학회지)

The Korean Society of Food Science and Nutrition (한국식품영양과학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Moisture Content on Physical Properties of Extruded Cereal Flours

수분함량에 따른 곡류 압출성형물의 물리적 특성 비교

  • Kim, Cheol-Hyun (Dept. of Food Science and Technology, Kongju National University) ;
  • Jin, Tie (Dept. of Food Science and Engineering, Agricultural College of Yanbian University) ;
  • Ryu, Gi-Hyung (Dept. of Food Science and Technology, Kongju National University)
  • 김철현 (공주대학교 식품공학과) ;
  • 김철 (중국 연변대학교 농학원 식품과학부) ;
  • 류기형 (공주대학교 식품공학과)
  • Received : 2012.07.27
  • Accepted : 2012.09.03
  • Published : 2012.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

The effects of moisture content on the physical properties of cereal extrudates were investigated. Cereal flours (rice, wheat, corn, barley, and oat) were extruded at a barrel temperature of $130^{\circ}C$, feed rate of 120 g/min, and various moisture contents (20, 22.5, 25, 27.5, and 30%). Proximate content, expansion index, specific length, bulk density, breaking strength, apparent elastic modulus, water absorption index (WAI), water solubility index (WSI), specific mechanical energy (SME) input, paste viscosity, and color values were analyzed. Expansion ratio of extruded corn flour was higher than that of other extrudates at low moisture content. Bulk density, specific length, and elastic modulus in all cereals decreased with an increase in moisture content. The WAI increased with an increase in moisture content, whereas WSI decreased. SME input of extruded corn flour was higher than those of other cereal flours at lower moisture content, whereas that of oat flour extrudate was lower than those of other cereals at higher moisture content. Lightness of extruded rice flour was lighter than those of other cereals while that of extruded barley flour was darker.

곡류식품의 소재 개발을 위하여 수분함량을 달리하여 처리한 후 압출성형 곡류가루의 일반성분, 팽화율, 비길이, 밀도, 파괴력, 겉보기 탄성계수, 수분흡착지수와 수분용해지수, 비기계적 에너지 투입량, 페이스트 점도, 색도를 측정하였다. 압출성형 조건은 배럴온도 $130^{\circ}C$, 원료투입량 120 g/min, 수분함량(20, 22.5, 25, 27.5, 30%)으로 압출성형 하였다. 수분함량 20%일 때 압출성형 곡류가루의 팽화율이 가장 높았으며, 밀도와 파괴력이 가장 낮았다. 수분함량이 증가할수록 수분흡착지수는 증가하였고, 수분용해지수는 수분함량이 낮을수록 높은 경향을 나타내었다. 비기계적 에너지 투입량은 낮은 수분함량일 때 옥수수가루가 가장 높았으며, 귀리가루는 높은 수분함량에서 가장 낮은 값을 나타내었다. 수분함량이 증가할수록 페이스트 점도가 증가하는 경향을 보였으며, 명도는 압출성형 쌀가루가 가장 밝게 측정되었고 압출성형 보리가루가 가장 어둡게 측정되었으며, 총 색도 변화는 원료를 기준으로 보리가 가장 크게 나타났다.

Keywords

References

  1. Guha M, Ali SZ. 2006. Extrusion cooking of rice: effect of amylose content and barrel temperature on product profile. J Food Process Preserv 30: 706-716. https://doi.org/10.1111/j.1745-4549.2006.00099.x
  2. Lee MS. 2004. Bioactive properties in whole grain. Food Indus Nutr 9: 19-25.
  3. Gu BJ, Norajit K, Ryu GH. 2010. Physicochemical properties of extruded defatted hemp seed and its energy bar manufacturing. Food Eng Prog 14: 127-134.
  4. Jin T, Lee ES, Hong ST, Ryu GH. 2007. Manufacturing of goami flakes by using extrusion process. Korean J Food Sci Technol 39: 146-151.
  5. Ryu GH. 2003. Texturization of plant protein by using extrusion process. Food Eng Prog 7: 73-79.
  6. Singh N, Smith AC. 1997. A comparison of wheat starch, whole wheat meal and oat flour in the extrusion cooking process. J Food Eng 34: 15-32. https://doi.org/10.1016/S0260-8774(97)00069-1
  7. Sim YJ, Jung BM, Rhee KC. 2001. Quality characteristic of extruded formulated products prepared from blends of rice flour, wheat flour and fish muscle by single-screw extrusion. Korean J Food Sci Technol 33: 45-49.
  8. Ryu GH, Kang SH, Lee EY, Lim ST. 1997. Effect of $CO_2$ gas injection on properties of extruded corn starch. J Korean Soc Food Sci Nutr 26: 436-442.
  9. Liu Y, Hsieh E, Heymann H, Huff HE. 2000. Effect of process conditions on the physical and sensory properties of extruded oat-corn puff. J Food Sci 65: 1253-1259. https://doi.org/10.1111/j.1365-2621.2000.tb10274.x
  10. Choi HD, Seog HM, Choi IW, Park MW, Ryu GH. 2004. Preparation of flakes by extrusion cooking using barley broken kernels. Korean J Food Sci Technol 36: 276-282.
  11. Mariotti M, Alamprese C, Pagani MA, Lucisano M. 2006. Effect of puffing on ultrastructure and physical characteristics of cereal grains and flours. J Cereal Sci 43: 47-56. https://doi.org/10.1016/j.jcs.2005.06.007
  12. AACC International. 1999. Approved Methods of Analysis. 11th ed. Method 08-01, 30-25, 46-10, 56-20. American Association of Cereal Chemists, St. Paul, MN, USA.
  13. Ryu GH, Ng PKW. 2001. Effects of selected process parameters on expansion and mechanical properties of wheat flour and whole cornmeal extrudates. Starch/Starke 53: 147-154. https://doi.org/10.1002/1521-379X(200104)53:3/4<147::AID-STAR147>3.0.CO;2-V
  14. Alvarez-Martinez L, Kondury KP, Harper JM. 1988. A general model for expansion of extruded products. J Food Sci 53: 609-615. https://doi.org/10.1111/j.1365-2621.1988.tb07768.x
  15. Barrett AH, Peleg M. 1992. Extrudate cell structure-texture relationships. J Food Sci 57: 1253-1257. https://doi.org/10.1111/j.1365-2621.1992.tb11311.x
  16. RVA Manual. 1995. RVA-3 series operation manual using Dos thermocline software. Newport scientific, Narrabeen, Australia.
  17. Majzoobi M, Farahnaky A. 2010. Comparison of the effects of extrusion cooking on some cereal starches. Int J Food Eng 6, DOI: 10.2202/1556-3758.1456
  18. We GJ, Lee I, Cho YS, Yoon MR, Shin MS, Ko SH. 2010. Development of rice flour-based puffing snack for early childhood. Food Eng Prog 14: 322-327.
  19. Ryu GH, Lee CH. 1988. Effects of moisture content and particle size of rice flour on the physical properties of the extrudate. Korean J Food Sci Technol 20: 463-469.
  20. Hagenimana A, Ding X, Fang T. 2006. Evaluation of rice flour modified by extrusion cooking. J Cereal Sci 43: 38-46. https://doi.org/10.1016/j.jcs.2005.09.003
  21. Jin T, Park HY, Ryu GH. 2005. Characteristics of cereals prepared by extrusion-cooking and freeze-drying. Korean Food Sci Technol 37: 757-762.
  22. Chinnaswamy R, Hanna MA. 1990. Macromolecular and functional properties of native and extrusion-cooked corn starch. Cereal Chem 67: 490-499.
  23. Jackson DS, Gomez MH, Waniska RD, Rooney LW. 1990. Effects of single-screw extrusion cooking on starch as measured by aqueous high-performance size-extrusion chromatography. Cereal Chem 67: 529-532.
  24. Svihus B, Uhlen AK, Harstad OM. 2005. Effect of starch granule structure, associated components and processing on nutritive value of cereal starch: A review. Anim Feed Sci Technol 122: 303-320. https://doi.org/10.1016/j.anifeedsci.2005.02.025
  25. Chaudhary AL, Miler M, Torley PJ, Sopade PA, Halley PJ. 2008. Amylose content and chemical modification effects on the extrusion of thermoplastic starch from maize. Carbohydr Polym 74: 907-913. https://doi.org/10.1016/j.carbpol.2008.05.017
  26. Holguin-Acuna AL, Carvajal-Millan E, Santana-Rodriguez V, Rascon-Chu A, Marquez-Escalante JA, Ponce de Leon-Renova NE, Gastelum-Franco G. 2008. Maize bran/oat flour extruded breakfast cereal: A novel source of complex polysaccharides and an antioxidant. Food Chem 111: 654-657. https://doi.org/10.1016/j.foodchem.2008.04.034
  27. Altan A, McCarthy KL, Maskan M. 2008. Extrusion cooking of barley flour and process parameter optimization by using response surface methodology. J Sci Food Agric 88: 1648-1659. https://doi.org/10.1002/jsfa.3262
  28. de Cindio B, Gabriele D, Pollini CM, Peressini D, Sensidoni A. 2002. Filled snack production by co-extrusion-cooking: 2. Effect of processing on cereal mixtures. J Food Eng 54: 63-73. https://doi.org/10.1016/S0260-8774(01)00186-8

Cited by

  1. Effects of Die Temperature and CO2Injection on Physical Properties and Antioxidant Activity of Extruded Rice with Tomato Flour vol.44, pp.6, 2015, https://doi.org/10.3746/jkfn.2015.44.6.912
  2. Quality Characteristics and Antioxidant Activities of Powdery Instant Porridge by Characteristics of Endosperm of Foxtail Millet vol.29, pp.4, 2016, https://doi.org/10.9799/ksfan.2016.29.4.465
  3. Physicochemical Properties of Rice-based Expanded Snacks according to Extrusion Conditions vol.43, pp.9, 2014, https://doi.org/10.3746/jkfn.2014.43.9.1407
  4. 압출성형 공정변수가 갈색거저리 애벌레(mealworm) 첨가 쌀 팽화 스낵의 이화학적 특성에 미치는 영향 vol.49, pp.4, 2017, https://doi.org/10.9721/kjfst.2017.49.4.444
  5. 쌀귀리 가루의 입도별 이화학적 특성 및 항산화 활성 vol.24, pp.7, 2012, https://doi.org/10.11002/kjfp.2017.24.7.965
  6. 수분함량을 달리하여 제조한 볶음 옥수수차의 품질 및 항산화 특성 vol.30, pp.6, 2017, https://doi.org/10.9799/ksfan.2017.30.6.1149
  7. Effect of barrel temperature and blending ratio on the sensory and physical properties of cassava-extruded snacks vol.5, pp.1, 2012, https://doi.org/10.1080/23311932.2019.1633795
  8. Bread-making properties of rice bread added with naked oat flours vol.26, pp.1, 2012, https://doi.org/10.11002/kjfp.2019.26.1.68
  9. Effects of Emulsifier Additions on the Physical Properties of Extruded Psyllium vol.23, pp.2, 2012, https://doi.org/10.13050/foodengprog.2019.23.2.118
  10. Effects of Psyllium Husk Content on the Physical Properties of Extruded Rice Flour vol.23, pp.4, 2019, https://doi.org/10.13050/foodengprog.2019.23.4.283
  11. 고령친화식품의 정책 및 산업기술 동향 vol.53, pp.4, 2012, https://doi.org/10.23093/fsi.2020.53.4.435