DOI QR코드

DOI QR Code

성형체의 대기시간에 따른 ALC 표면 색상과 결정특성

Colors and Crystals of ALC Surface with Green Body's Staying Time

  • 추용식 (한국세라믹기술원 에너지환경소재본부) ;
  • 서성관 (한국세라믹기술원 에너지환경소재본부) ;
  • 박수현 (한국세라믹기술원 에너지환경소재본부) ;
  • 송훈 (한국세라믹기술원 에너지환경소재본부) ;
  • 이종규 (한국세라믹기술원 에너지환경소재본부)
  • Chu, Yong Sik (Energy & Environmental Division, Korea Institute of Ceramic Engineering & Technology) ;
  • Seo, Sung Kwan (Energy & Environmental Division, Korea Institute of Ceramic Engineering & Technology) ;
  • Park, Soo Hyun (Energy & Environmental Division, Korea Institute of Ceramic Engineering & Technology) ;
  • Song, Hun (Energy & Environmental Division, Korea Institute of Ceramic Engineering & Technology) ;
  • Lee, Jong Kyu (Energy & Environmental Division, Korea Institute of Ceramic Engineering & Technology)
  • 투고 : 2012.10.09
  • 심사 : 2012.11.19
  • 발행 : 2012.11.30

초록

ALC was fabricated using cement, lime, quartzite and a foaming agent via a hydrothermal reaction. ALC has various hydrothermal reaction products and many pores. The properties and colors of ALC surfaces were changed by various factors during ALC fabrication process. This study tested various staying times to analyze these phenomena. It was found that the staying time of green body influenced the properties of hydrothermal products and color of ALC surface. The longer staying time of green body, the lower tobermorite content and cumulative loss weight. An increase in holding time changed color and decreased whiteness of ALC surface. The relationship between whiteness and cumulative loss weight was very high (Coefficient, r = 0.95). It was surmised that tobermorite content was an important factor for enhancement of whiteness However, ettringite and quartzite did not contribute to whiteness.

키워드

참고문헌

  1. Ilker Bekir Topc-ua, and Tayfun Uygunoglu, "Properties of Autoclaved Lightweight Aggregate Concrete," Building Environment, 42 4108-16 (2007). https://doi.org/10.1016/j.buildenv.2006.11.024
  2. A. Laukaitis and B. Fiks, "Acoustical Properties of Aerated Autoclaved Concrete," Appl. Acoustics, 67 284-96 (2006). https://doi.org/10.1016/j.apacoust.2005.07.003
  3. H. Kurama, I.B. Topcu, and C. Karakurt, "Properties of the Autoclaved Aerated Concrete Produced from Coal Bottom Ash," J. Mater. Proc. Tech., 209 767-73 (2009). https://doi.org/10.1016/j.jmatprotec.2008.02.044
  4. W. Y. Kim, H. B. Ji, T. Y. Yang, S.Y. Yoon, and H. C. Park, "Preparation of Porous Mullite Composites through Recycling of Coal Fly Ash," J. Kor. Ceram. Soc., 47 [2] 151-56 (2010). https://doi.org/10.4191/KCERS.2010.47.2.151
  5. J. Alexanderson, "Relations between Structure and Mechanical Properties of Autoclaved Aerated Concrete," Cem. Conc. Res., 9 507-14 (1979). https://doi.org/10.1016/0008-8846(79)90049-8
  6. F. Matsushita, Y. Aono, and S. Shibata, "Carbonation Degree of Autoclaved Aerated Concrete," Cem. Conc. Res., 30 [11] 1741-45 (2000). https://doi.org/10.1016/S0008-8846(00)00424-5
  7. V. S. Ramachandran, "Applications of Differential Thermal Analysis in Cement Chemistry;" pp. 170-76, Chemical Publishing Company, New York, 1969.
  8. D. S. Klimesch, and A. Ray, "The use of DTA/TGA to Study the Effects of Ground Quartz with Different Surface Areas in Autoclaved Cement: Quartz Pastes. Part 1: A Method for Evaluating DTA/TGA Results", Thermochimica Acta, 289 [1] 41-54 (1996). https://doi.org/10.1016/S0040-6031(96)03033-X
  9. C.-F. Chang, J.-W. Chen, "The Experimental Investigation of Concrete Carbonation Depth," Cem. Conc. Res., 6 [9] 1760-67 (2006).