콘크리트학회논문집 (Journal of the Korea Concrete Institute)

  • 제24권6호
  • /
  • Pages.753-760
  • /
  • 2012
  • /
  • 1229-5515(pISSN)
  • /
  • 2234-2842(eISSN)
한국콘크리트학회 (Korea Concrete Institute)
권호 표지
DOI QR코드

DOI QR Code

고인성섬유 복합모르타르를 활용한 고강도 철근콘크리트 내부 보-기둥 접합부의 내진성능 개선 연구

A Study on Improvement of Seismic Performance of High Strength Reinforced Concrete Interior Beam-Column Joints using High Ductile Fiber-Reinforced Mortar

  • 투고 : 2012.10.04
  • 심사 : 2012.11.05
  • 발행 : 2012.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

이 연구에서는 고강도 철근콘크리트 내부 보-기둥 접합부의 시공성 및 내진성능을 개선하기 위하여 보-기둥 접합부 영역의 스터럽 및 띠철근 유무에 따라 고인성섬유 복합모르타르를 사용하여 내진성능을 평가하였다. 총 6개의 실험체를 제작하고 실험을 수행하여 내진성능을 평가하였으며, 이 연구의 실험 결과를 근거로 다음과 같은 결론을 얻었다. 기존 고강도 철근콘크리트 내부 보-기둥 접합부의 위험단면 영역을 고인성섬유 복합모르타르로 보강한 결과 재하 전 과정을 통하여 섬유의 가교역할로 인한 균열 분산효과로 인하여 균열 제어 효과가 커서 안정적인 파괴형태 및 내력을 나타내었다. 고강도 철근콘크리트 내부 보-기둥 접합부의 시공성 및 내진성능을 개선하기 위하여 고인성섬유 복합모르타르를 사용하여 보강한 실험체($IJNSP_{1.0}$, $IJNSP_{1.5}$, $IJNSP_{2.0}$)는 스터럽과 띠철근이 제거되었음에도 안정적인 이력거동을 나타내었고, 최대내력이 표준실험체의 96~102.8%, 에너지소산능력은 최대 0.99~1.11배로 표준실험체와 거의 비슷한 에너지소산능력을 나타내었다.

In this study, experimental research was carried out to evaluate and improve the constructability and seismic performance of high strength R/C interior beam-column joints regions, with or without the shear reinforcement, using high ductile fiber-reinforced mortar. Six specimens of retrofitted the beam-column joint regions using high ductile fiber-reinforced mortar are constructed and tested for their retrofit performances. Specimens designed by retrofitting the interior beam-column joint regions (IJNS series) of existing reinforced concrete building showed a stable mode of failure and an increase in load-carrying capacity due to the enhancement of crack dispersion by fiber bridging from using new high ductile materials for retrofitting. Specimens of IJNS series, designed by the retrofitting of high ductile fiber-reinforced mortar in beam-column joint regions increased its maximum load carrying capacity by 96~102.8% and its energy dissipation capacity by 0.99~1.11 folds when compared to standard specimen of SIJC with a displacement ductility of 5.

키워드

참고문헌

  1. Li, V. C., Wang, Y., and Backer, S. A., "Micromechanical Model of Tension-Softening and Bridging Toughening of Short Random Fiber Reinforced Brittle Matrix Composites," Journal of the Mechanics and Physics of Solids, Vol. 39, Issue 5, 1991, pp. 607-625. https://doi.org/10.1016/0022-5096(91)90043-N
  2. Kanda, T. and Li, V. C., "A New Micromechanics Design Theory for Pseudo Strain Hardening Cementitious Composite," Journal of Engineering Mechanics, ASCE, Vol. 125, No. 4, 1999, pp. 373-381. https://doi.org/10.1061/(ASCE)0733-9399(1999)125:4(373)
  3. Li, V. C., Wu, C., Wang, S., Ogawa, A., and Saito, T., "Interface Tailoring for Strain Hardening PVA-ECC," ACI Materials Journal, Vol. 99, No. 5, 2002, pp. 463-472.
  4. Kim, Y., Y., Kim, J. S., Kim, H. S., Ha, G. J., and Kim J. K., "Mechanical Properties of an ECC (Engineered Cementitious Composite) Designed Based on Micromechanical Principle," Journal of the Korea Concrete Institute, Vol. 17, No. 5, 2005, pp. 709-716. https://doi.org/10.4334/JKCI.2005.17.5.709
  5. Kim, Y. Y., Ha, G. J., and Shin, J. H., "Design of ECC(Engineered Cementitious Composite) Matrix Compositions Based on Micromechanics and Steady-State Cracking Theory," Journal of the Architectural Institute of Korea, Vol. 23, No. 5, 2007, pp. 11-19.
  6. Kim, J. S., Ha, G. J., Hong, K. H., and Shin, J. H., "Tensile and Fiber Dispersion Performance of ECC (Engineered Cementitious Composites) Designed with Ground Granulated Blast Furnace Slag," Journal of the Regional Association of Architectural Institute of Korea, Vol. 12, No. 2, 2010, pp. 209-216.
  7. Ha, G. J., Yi, D. R., and Hong, K. H., "Improvement and Evaluation of Repair-Retrofit Performance of Reinforced Concrete Beam using High Ductile Fiber-Reinforced Mortar with Ground Granulated Blast Furnace Slag," Journal of the Regional Association of Architectural Institute of Korea, Vol. 12, No. 4, 2010, pp. 261-270.
  8. Yang, I. S., Yun, H. D., Kim, S. W., Park, W. S., Han, B. C., and Moon, Y. J., "Hysteretic Characteristics of Seismic Devices using High Performance Fiber Reinforced Cement Composites," Journal of the Architectural Institute of Korea, Vol. 21, No. 1, 2005, pp. 51-58.
  9. Kim, J. H., Yun, H. D., and Jeon, E., "Material Design, Characteristics and Application of Engineered Cementitious Composites," Magazine of the Korea Concrete Institute, Vol. 18, No. 1, 2006, pp. 28-35.
  10. Yoon, Y. S., "Concept and Background of Shear Design in Reinforced Concrete Beams," Magazine of the Korea Concrete Institute, Vol. 8, No. 5, 1996, pp. 61-69.