DOI QR코드

DOI QR Code

Structural Damage Monitoring of Harbor Caissons with Interlocking Condition

  • Huynh, Thanh-Canh (Department of Ocean Engineering, Pukyong National University) ;
  • Lee, So-Young (Department of Ocean Engineering, Pukyong National University) ;
  • Nguyen, Khac-Duy (Department of Ocean Engineering, Pukyong National University) ;
  • Kim, Jeong-Tae (Department of Ocean Engineering, Pukyong National University)
  • Received : 2012.11.02
  • Accepted : 2012.12.10
  • Published : 2012.12.30

Abstract

The objective of this study is to monitor the health status of harbor caissons which have potential foundation damage. To obtain the objective, the following approaches are performed. Firstly, a structural damage monitoring(SDM) method is designed for interlocked multiple-caisson structures. The SDM method utilizes the change in modal strain energy to monitor the foundation damage in a target caisson unit. Secondly, a finite element model of a caisson system which consists of three caisson units is established to verify the feasibility of the proposed method. In the finite element simulation, the caisson units are constrained each other by shear-key connections. The health status of the caisson system against various levels of foundation damage is monitored by measuring relative modal displacements between the adjacent caissons.

Keywords

References

  1. H. Oumeraci, "Review and analysis of vertical breakwater failures-lessons learned," Coastal Engineering, Vol. 22, pp. 3-39 (1994a) https://doi.org/10.1016/0378-3839(94)90046-9
  2. M. Yamamoto, T. Endo, A. Hasegawa and K. Tsunakawa, "Random wave tests on a damaged breakwater in Himekawa Harbor, Japan," Coastal Engineering, Vol. 5, pp. 275-294 (1981) https://doi.org/10.1016/0378-3839(81)90019-3
  3. M. Kobayashi, M. Tersashi and K. Takahashi, "Bearing capacity of rubble mound supporting a gravity structure," Report of Port and Harbor Research Institute, 26(5), pp. 234-241 (1987)
  4. H. Sekiguchi and S. Ohmaki, "Overturning of caisson by storm waves," Soild and Found., Tokyo, 32(3), pp. 144-155 (1992) https://doi.org/10.3208/sandf1972.32.3_144
  5. H. Sekiguchi and S. Kobayashi "Sliding of caisson on rubble mound by wave force," Proc. 13rd Int. Conf. on Soil Mech. and Found. Engrg., Balkema, Rotterdam, The Neitherlands, pp. 1137-1140 (1994)
  6. S. Y. Lee, S. R. Lee and J. T. Kim, "Vibration based structural health monitoring of harbor caisson structure", Proceeding of SPIE, USA (2011)
  7. E. Jabbari and O. Talebi, "Using artificial networks for estimation of scour at the head of vertical wall breakwater," Journal of Coastal Research, Special Issue 64, pp. 521-526 (2011)
  8. K. H. Lee and N. Mizutani, "Experimental study on scour occurring at a vertical impermeable submerged breakwater," Applied Ocean Research, Vol. 30, pp. 92-99 (2008) https://doi.org/10.1016/j.apor.2008.06.003
  9. S. Y. Lee, K. D. Nguyen, T. C. Huynh, J. T. Kim, J. H. Yi and S. H. Han, "Vibration-based damage monitoring of harbor caisson structure with damaged foundation-structure interface," Smart Structures and Systems, Accepted for publication (2012)
  10. H. S. Yoon, S. Y. Lee, J. T. Kim and J. H. Yi, "Field implementation of wireless vibration sensing system for monitoring of harbor caisson breakwaters," International Journal of Distributed Sensor Networks, Accepted for publication (2012)
  11. Y. Z. Wang, N. N. Chen and L. H. Chi, "Numerical simulation on joint motion process of various modes of caisson breakwater under wave excitation," Commun. Numer. Meth. Engng, Vol. 22, pp. 535-545 (2006)
  12. A. Lamberti and L. Marteinelli, "Prototype measurements of the dynamic response of caisson breakwaters," Coastal Engineering, pp. 1972-1985 (1998)
  13. J. E. Bowles, "Foundation Analysis and Design (5th Edition)," McGraw-Hill (1996)
  14. H. M. Westergaard, "Water pressures on dams during earthquakes," Trans. ASCE, Vol. 98, pp. 418-432 (1933)
  15. J-H. Yi and C-B. Yun, "Comparative study on modal identification methods using output-only information," Structural Engineering and Mechanics, Vol. 17, No. 3-4, pp. 445-466 (2004) https://doi.org/10.12989/sem.2004.17.3_4.445