소성∙가공 (Transactions of Materials Processing)

  • 제21권8호
  • /
  • Pages.506-511
  • /
  • 2012
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

A357을 이용한 알루미늄 반응고 브레이징 접합 계면 특성

Microstructures of Bonding Interfaces after Semi-Solid Brazing of Aluminum Using A357 as a Filler Metal

  • Lee, S.Y. (Dept. of Advanced Materials Engineering, Andong National University)
  • 투고 : 2012.11.02
  • 심사 : 2012.11.22
  • 발행 : 2012.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Aluminum brazing normally requires a careful control of temperature due to the small interval between brazing and melting temperatures for base materials. Unsuitable processing conditions, including brazing temperature outside admissible range, gap between brazed materials or inadequate flux feeding, can lead to joining defects. In this study, A357 was used as a filler metal for the brazing of pure aluminum base materials and brazed at temperatures in the semi-solid state. Interface microstructures with base materials were observed using optical metallography(OM) and scanning electron microcopy(SEM) with energy dispersive spectroscopy(EDS), and compared to conventional aluminum brazing.

키워드

참고문헌

  1. J. P. Jung, C. S. Kang, Y. J. Park, S. H. Hang, 1994, Brazing technology and trend in Japan(1), J. Korean Welding Soc., Vol. 12, No.4, pp. 50-62.
  2. T. Markovits, J. Takacs, A. Lovas, J. Belt, 2003, Laser Brazing of Aluminum, J. Mater. Process. Technol., Vol. 143-144, pp. 651-655. https://doi.org/10.1016/S0924-0136(03)00310-8
  3. Z. Fan, 2002, Semisolid Metal Processing, Int. Mater. Rev., Vol. 47, No.2, pp. 49-85. https://doi.org/10.1179/095066001225001076
  4. S. Engler, D. Hartmann, I. Niedick, 2000, Proc. of 6th Int. Conf. on Semi-Solid Processing of Alloys and Composites(G. Chiarmetta, M. Rosso), Edimet, Turin, Italy, pp. 483-488.
  5. S. Y. Lee, C. H. Kim, 2009, Measurements of Micro-Defects in the Aluminum Thixoformed Part using Computed Tomography(CT) Technology, Trans. Mater. Process., Vol.18, No. 5, pp. 422-427. https://doi.org/10.5228/KSPP.2009.18.5.422

피인용 문헌

  1. Recent Study of Technical Development for High Efficient Brazing vol.34, pp.2, 2016, https://doi.org/10.5781/JWJ.2016.34.2.36