Textile Coloration and Finishing (한국염색가공학회지)

The Korean Society of Dyers and Finishers (한국염색가공학회)
권호 표지
DOI QR코드

DOI QR Code

The Improvement of Thermal Stability and Tensile Toughness by the Photocrosslinking of Poly(phenylene sulfide) containing Acetophenone

아세토페논을 함유한 Poly(phenylene sulfide)의 광가교에 의한 내열성과 인장인성 강화

  • Jang, Yong-Joon (Department of Materials Design Engineering, Kumoh National Institute of Technology) ;
  • Jang, Jinho (Department of Materials Design Engineering, Kumoh National Institute of Technology)
  • 장용준 (금오공과대학교 소재디자인공학과) ;
  • 장진호 (금오공과대학교 소재디자인공학과)
  • Received : 2012.11.19
  • Accepted : 2012.12.11
  • Published : 2012.12.27
Download PDF
⟨ Previous Next ⟩

Abstract

Poly(phenylene sulfide) films containing acetophenone as a photoinitiator were photocrosslinked under UV irradiation using a continuous UV irradiator. The gel fraction of the irradiated PPS in 1-Chloro naphthalene reached 94.7% with increasing UV energy and the photoinitiator concentration in the film upto $200J/cm^2$ and 12wt% respectively. Solid state $^1C$ NMR analysis suggested that the crosslinking occurred between the phenylene chains in PPS, indicating that the acetophenone may the phenylene hydrogens and subsequently adjacent polymer radicals could be recombined to form the crosslinked structure. The crosslinking improved the thermal behavior of PPS such as loss of $T_g$ and $T_c$, higher melting point and lower melting enthalphy as well as significantly higher peak pyrolysis temperature as much as $63.5^{\circ}C$. Surprisingly the tensile toughness of the most crosslinked PPS increased by 842%, resulting from the substantial enhancements in tensile modulus, strength and strain as much as 76%, 236% and 240% respectively. Also dynamic mechanical measurement indicated that the distance between crosslinks in the crosslinked PPS reached 85.3 g/mol corresponing to a crosslink density of 0.012 mol/g.

Keywords

References

  1. M. J. Ham and Y. H. Kim, Effect of High Temperature Annealing on the Property Changes of Poly(phenylene sulfide) Films, Textile Coloration and Finishing(J. Korean Soc. Dye. and Finish.), 47(2), 102(2010).
  2. Z. Mei and D. D. L. Chung, Effect of Heating Time below the Melting Temperature on Polyphenylene Sulfide Adhesive Joint Development, International J. of Adhesion and Adhesives, 20(4), 273(2000). https://doi.org/10.1016/S0143-7496(99)00056-1
  3. W. Tanthapanichakoona, M. Furuuchia, K. Nittaa, M. Hataa, S. Endohb and Y. Otani, Degradation of Semi-crystalline PPS Bag-filter Materials by NO and $O_2$ at High Temperature, Polymer Degradation and Stability, 91(8), 1637(2006). https://doi.org/10.1016/j.polymdegradstab.2005.12.008
  4. J. S. Lee, B. Y. Kim and J. H. Lee, The Relation Among the Linear Energy Transfer and Changes of Polyphenylene Sulfide Surface by Ion Implantation, J. of the Korean Institute of Electronic Material Engineers, 18(5), 407(2005). https://doi.org/10.4313/JKEM.2005.18.5.407
  5. N. Anagreh, L. Dorn and C. B. Krause, Lowpressure Plasma Pretretment of Polyphenylene Sulfide (PPS) Surfaces for Adhesive Bonding, Int. J. of Adhesion and Adhesives, 28(1), 16(2007).
  6. G. H. Koo and J. Jang, Hydrophilic Modification of Poly(ethylene oxide) by UV Irradiation, Textile Coloration and Finishing(J. Korean Soc. Dye. and Finish.), 21(1), 16(2009). https://doi.org/10.5764/TCF.2009.21.5.016
  7. E. M. Kim, and J. Jang, Surface Modification of meta-Aramid Films by UV/ozone Irradiation, Fibers and Polymers, 11, 677(2010). https://doi.org/10.1007/s12221-010-0677-5
  8. Y. Dong and J. Jang, The Enhanced Cationic Dyeability of Ultraviolet⁄Ozone-treated meta-Aramid Fabrics, Color. Technol., 127, 173(2011). https://doi.org/10.1111/j.1478-4408.2011.00295.x
  9. D. W. Yun and J. Jang, Surface Modification of Ultra High Molecular Weight Polyethylene Films by UV/ozone Irradiation, Textile Coloration and Finishing(J. Korean Soc. Dye. and Finish.), 23, 76(2011). https://doi.org/10.5764/TCF.2011.23.2.76
  10. E. M. Kim, B. G. Min, and J. Jang, Reactive Dyeing of meta-Aramid Fabrics Photografted with Dimethylaminopropyl Methacrylamide, Fibers and Polymers, 12, 580(2011). https://doi.org/10.1007/s12221-011-0580-8
  11. D. W. Yun and J. Jang, Octadecane Fixation via Photocrosslinking of Polyethylene Film, Textile Coloration and Finishing(J. Korean Soc. Dye. and Finish.), 22(3), 214(2010). https://doi.org/10.5764/TCF.2010.22.3.214
  12. G. H. Koo and J. Jang, Depth-Gradient and Photoinitiator-Free Photocrosslinking of Poly(ethylene oxide), J. of Applied Polymer Science, 125, 2012. http://dx.doi.org/10.1002/APP.38056
  13. G. H. Koo, and J. Jang, Preparation of Melting-Free Poly(lactic acid) by Amorphous and Crystal Crosslinking under UV Irradiation, J. of Applied Polymer Science, 125, 2012. http://dx.doi.org/10.1002/APP.38056
  14. A. M. Diez-Pascual and M. Naffakh, Synthesis and Characterization of Nitrated and Aminated Poly(phenylene sulfide) Derivatives for Advanced Applications, Materials Chemistry and Physics, 131, 605(2012). https://doi.org/10.1016/j.matchemphys.2011.10.025

Cited by

  1. Acetophenone-assisted main-chain photocrosslinking of poly(ethylene terephthalate) vol.131, pp.2, 2014, https://doi.org/10.1002/app.39802
  2. Photooxidation of Poly(vinyl butyral) Films by UV/Ozone Irradiation vol.27, pp.2, 2015, https://doi.org/10.5764/TCF.2015.27.2.113
  3. Surface Photooxidation of Poly(butylene terephthalate) Films by UV/Ozone Irradiation vol.28, pp.2, 2016, https://doi.org/10.5764/TCF.2016.28.2.63
  4. Wear minimization of ultra high molecular weight polyethylene by benzophenone-assisted photocrosslinking vol.15, pp.3, 2014, https://doi.org/10.1007/s12221-014-0480-9
  5. Photooxidation of Poly(butylene succinate) Films by UV/Ozone Irradiation vol.26, pp.3, 2014, https://doi.org/10.5764/TCF.2014.26.3.159
  6. Photo-oxidation and Dyeability of Poly Ketone by UV/O3Irradiation vol.25, pp.1, 2013, https://doi.org/10.5764/TCF.2013.25.1.25
  7. The UV/Ozone Stability of PET and Nylon 6 Nanocomposite Films Containing TiO2Photocatalysts vol.26, pp.2, 2014, https://doi.org/10.5764/TCF.2014.26.2.88