DOI QR코드

DOI QR Code

Design of LNA and Mixer for Ku-band Receiver

Ku 밴드 수신단을 위한 저잡음 증폭기 및 주파수 혼합기 설계

  • 최혁재 (중앙대학교 전자전기공학부) ;
  • 고재형 (중앙대학교 전자전기공학부) ;
  • 김군태 (중앙대학교 전자전기공학부) ;
  • 이제광 (중앙대학교 전자전기공학부) ;
  • 김형석 (중앙대학교 전자전기공학부)
  • Received : 2011.10.22
  • Accepted : 2011.11.25
  • Published : 2012.02.01

Abstract

The Ministry of Information-Communication assigned 18~19GHz frequency band for communication of cabins and platform to link between subway/train and it's station. In this paper, we propose wireless transmission devices which are 2 stage hybrid low noise amplifier of 18GHz band and mixer for 18GHz as well to apply for RF receiver. We designed LNA to be noise matched its 1st stage and gain matched for 2nd stage and mixer using $180^{\circ}$ hybrid coupler to suppress the spurious signal. The transistors of 18 GHz LNA and mixer are NE3210S01 of NEC and KMB-N51-1, respectively. As the result of simulation, we get 19.92dB gain and 2.06dB noise figure with LNA and 8.61dB conversion loss with mixer.

Keywords

References

  1. 정통부 공정회 자료, '지하철 무선영상전송용 주파수 분배방안', 2007
  2. 김인복, 김태규 " 지하철 무선 영상전송용 19GHz 중계 기 설계" , 마이크로파 및 전파전파 학술대회 논문집, 제 33권, 제 1호, pp. 166, 2010년 6월
  3. 안동식, 장동필 "23GHz대 2단 저잡음 증폭기의 제작기술에 관한 연구", 한국전자파학회논문지, 제8권, 제1호, pp. 52-60, 1997년 02월
  4. A. Sayag1, S. Levin2, D. Regev2, D. Zfira2, S.Shapira2, D. Goren3 and D. Ritter, "A 25 GHz 3.3 dB NF Low Noise Amplifier based upon Slow Wave Transmission Lines and the 0.18 $\mu m$ CMOS Technology," IEEE RFIC 2008
  5. Milton Feng et al., "Ka-Band Monolithic Low Noise Amplifier Using Direct Ion-Implanted GaAs MESFET's," IEEE Microwave and Guided Wave Letters, vol. 5. no. 5, pp.156 - 158, 1995. https://doi.org/10.1109/75.374083
  6. Stephen A. Maas, Fellow, IEEE, and Kwo Wei Chang, "A Broadband, Planar, Doubly Balanced Monolithic Ka-Band Diode Mixe", IEEE Trans. on microwave theory and techniques, Vol. 41, NO. 12, DECEMBER 1993.
  7. Stephen A. Maas, "A GaAs MESFET BALANCED MIXER WITH VERY LOW INTERMODULATION", 1987 IEEE MTT-S Digest