DOI QR코드

DOI QR Code

A Study on the Influence of Mutual Inductance between Wayside Transmitter and On-board Receiver upon Frequency Response in ATS Device

ATS 장치에서 지상자와 차상자 사이의 상호인덕턴스가 주파수 응답에 미치는 영향

  • 김민석 (한국전기산업진흥회 연구개발팀) ;
  • 김민규 (서울메트로 신호처) ;
  • 이종우 (서울과학기술대학교 철도전문대학원 철도전기신호공학과)
  • Received : 2011.12.15
  • Accepted : 2012.02.23
  • Published : 2012.03.01

Abstract

Railroad signaling systems perform controlling the distance and routes between trains. Signaling methods on the wayside are to control passively the train speed by using signal flags which are installed on the wayside. ATS(Automatic Train Stop) device is used as the signaling method on the wayside in Korea. The ATS device is assistance equipment of engineers. Signal information is transmitted by combining mutual inductance between the wayside transmitter and on-board receiver. The wayside transmitter performs changing oscillation frequency according to the signal information. The on-board receiver performs controlling the train by receiving the frequency. Currently, the oscillation frequency on the on-board receiver is 78[kHz] in case of normal state. When the on-board receiver is over the wayside transmitter, the oscillation frequency is changed by capacitors of the wayside transmitter according to signal flags. In case of changing the oscillation frequency, the waveform is modified in the wayside transmitter and on-board receiver. This phenomenon is that other signals or communication frequency are included. In this paper, electric model between the wayside transmitter and on-board receiver is suggested and frequency response in the wayside transmitter and on-board receiver including other signals is estimated by the coupling coefficient. Also, the value of coupling coefficient is proposed to exclude other signals and demonstrated by using Matlab and PSpice program.

Keywords

References

  1. 박재영, "철도신호공학", 동일출판사, pp.53-60, 2006.
  2. 강인권, "전기철도시스템공학", 성안당, pp.213-225, 2007.
  3. Sun-Ho Yoon, "A Study on the EMI between ATS and ATO System", in Proceeding of International Conference on Electrical Engineering, pp.1-6, 2009.
  4. Young-Hwan Ko, "A Study about Preventing Improper Working of Equipment on ATS System by Signaling Equipment", in Proceeding of the Spring Conference for Railway, The Korean Society for Railway, pp.574-582, 2008.
  5. Sun-Ho Yoon, "A Study on the EMI between ATS System and ATC/ATO System", Graduate School of Railroad at the Seoul National University of Technology, Master's thesis, pp.35-40, 2009.
  6. K. Mabe, K. Sato,. "Develpment of new on-board speed checking type ATS", Tetsudo Saibane, Shinpojium Ronbunshu, Vol.39, No.1, pp.1-4, 2002.
  7. Jin-Uk Kim, "A Study on the reaction method of ATS system by frequency synthesis", in Proceeding of the Spring Conference for Railway, The Korean Society for Railway, pp.7-20, 2006.
  8. E.H. Armstrong, "Some Recent Developments of Regenerative Circuits", Proc. of the IRE, Vol.10, No.4, pp.244-260, 1922. https://doi.org/10.1109/JRPROC.1922.219822
  9. H. Arai, K. Sato, "Investigation of the Safety of Automatic Train Stop System", RTRI Report, Vol.14, No.2, pp.35-40, 2000.
  10. R.T. Sewell, "Evolution of Electronics in Railway Signaling from the Track Circuit Standpoint", IEEE 35th Vehicular Technology Conference, Vol.35, pp.292-298, 1985.
  11. W.H. Hayt, "Engineering Circuit Analysis", McGraw-Hill, Sixth Edition, pp.433-435, 2002.
  12. David K. Cheng,. "Fundamentals of engineering electromagnetics", Pearson Education, pp.177-179, 2002.
  13. Min-Seok Kim, "The Influence of Frequency on Wayside Transmitter of ATP System upon Reinforcing Bars in Concrete Slab Track", Journal of the Korean Society for Railway, Vol.11, No.6, pp.536-542, 2008.
  14. T. Kiyoshi, H. Nakamura, "Automatic Protection System Depending on Data Oriented Control Method", in Proceeding of IEEE Railroad Conference, Pittsbirg USA, pp.51-57, 1993.
  15. Min-Seok Kim, "A Study on the Distance between the Track Circuits Using Identical Frequency in Railway Track Circuit System", Journal of the Korean Institute of Electrical Engineers, Vol.58, No.11, pp.2168-2174, 2009.