DOI QR코드

DOI QR Code

Properties of Mirror-surface Grinding for Metal Matrix Ceramic Composites

금속기지 세라믹 복합소재의 경면연삭 가공 특성

  • Kwak, Tae-Soo (Department of Mechanical Engineering, Gyeongnam National University of Science and Technology)
  • 곽태수 (경남과학기술대학교 기계공학과)
  • Received : 2011.10.20
  • Accepted : 2011.12.19
  • Published : 2012.01.31

Abstract

This study has been focused on properties of mirror surface grinding technology by ELID(Electrolytic In-process Dressing) for metal matrix ceramic composites using in high precision mirror for optics. The experimental studies have been carried out to get mirror surface by grinding for composites, Al-SiC, Al-graphite and Mg-SiC. Grinding process is carried out with varying abrasive mesh type, depth of cut and feed rate using diamond wheel. The machining result of the surface roughness and condition of ground surface, have been analyzed by use of surface roughness tester and SEM measurement system. ELID grinding technology could be applied successfully for the mirror-surface manufacturing processes in spite of ductility of metal matrix material. As the results of experiments, surface roughness of Al-SiC(45 wt%) has been the most superior in these experimental work-pieces as 0.021 ${\mu}m$ Ra.

Keywords

References

  1. M. Kang, M. Lee, and J. Lee, "Evaluation of Thermal Shock Damage of Metal Matrix Composite Using Ultrasonics," J. Kor. Soc. Mech. Eng., 29 [11] 1480-87 (2005).
  2. S. Cheon, "Tensile Behaviour of Foamed Metal Matrix Composite Using Stochastic FE Model," J. Kor. Soc. Comp. Mater., 17 [2] 34-9 (2004).
  3. Y. Kim, T. Kwak, and K. Kim, "Mirror-surface Machining Properties of Structural Ceramics using Diamond Abrasives," J. Kor. Ceram. Soc., 47 [4] 290-95 (2010). https://doi.org/10.4191/KCERS.2010.47.4.290
  4. T. Kwak and H. Ohmori, "Nano-level Mirror Surface Machining Technology for SiC Ceramics Mirror," J. Kor. Soc. Prec. Eng., 23 [6] 29-36 (2006).
  5. T. Kwak, "Machining Properties to Nano-Level Mirror Surface Finishing for Fine Grained WC-Co 18% Alloy using Magnetic Polishing Slurry," J. Kor. Ceram. Soc., 46 [1] 102-7 (2009). https://doi.org/10.4191/KCERS.2009.46.1.102

Cited by

  1. Review of Technology Trends for Ceramics Removal-Machining vol.30, pp.12, 2013, https://doi.org/10.7736/KSPE.2013.30.12.1227
  2. Development of ELID Monitoring System and its Application to ELID Grinding of Structural Ceramics vol.30, pp.12, 2013, https://doi.org/10.7736/KSPE.2013.30.12.1245
  3. Effects of Duty Cycle and Pulse Frequency on the Microstructure and Mechanical Properties of TiAlN Coatings vol.51, pp.5, 2014, https://doi.org/10.4191/kcers.2014.51.5.447