Journal of the Korean Society of Propulsion Engineers (한국추진공학회지)

The Korean Society of Propulsion Engineers (한국추진공학회)
권호 표지
DOI QR코드

DOI QR Code

The Trend of New Technology in Metal Spinning

Metal 스피닝의 신기술 동향

  • 이태호 (한국과학기술정보연구원)
  • Received : 2011.04.25
  • Accepted : 2011.12.12
  • Published : 2012.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study investigates mainly on the technical development trend through the published papers, such as asymmetric metal spinning, metal spinning in heat treatment conditions and free mandrel spinning. Although the classical spinning, so called conventional, shear, tube spinning, uses the axisymmetric shaped mandrel(which is same inner shape of the final product), in new technologies the mandrel can be asymmetric one, spinning can be done without mandrel and also spinning is done with heat treatment together.

본 조사에서는 주로 비 축대칭 스피닝, 열처리와 스피닝, 그리고 자유 맨드릴 스피닝 등에 대한 신기술을 동향을 문헌을 통하여 조사하였다. 기존의 재래식, 전단, 튜브 스피닝은 모두 축대칭 맨드릴(제품의 최종 제품의 내경과 같은)을 사용하여 가공하여 왔으나, 신 기법에서는 비 축대칭 맨드릴이나, 맨드릴이 없이, 또 열처리를 동반한 스피닝 공법이 시도되고 있다.

Keywords

References

  1. O. Music et al "A review of the mechanics of metal spinning," Journal of Materials Processing Technologies 210, 2010, pp.3-23 https://doi.org/10.1016/j.jmatprotec.2009.08.021
  2. Eamonn Quigley, John Monaghan, "Metal forming: an analysis of spinning processes," Journal of Materials Processing Technology, 103, 2000, pp.114-119 https://doi.org/10.1016/S0924-0136(00)00394-0
  3. Hayama, Kudo, Shinokura, "Study of the pass schedule in conventional simple spinning," Bulletin of the JSME 65, 1970, pp.61-69
  4. Gao, Kang, Wu, "Experimental research on a new technology-elliptical spinning," Journal of Material Processing Technology, 94, 1999, pp.197-200 https://doi.org/10.1016/S0924-0136(99)00098-9
  5. Awisuzus, Meyer, "Metal spinning of non circular hollow parts," 8th International Conference on Technology of Plasticity, Oct., 2005
  6. Arai, H., "Robotic metal spinning-forming non-axisymmetric products using force control," Journal of Robotics Society of Japan, 24, 2006, pp.140-145 https://doi.org/10.7210/jrsj.24.140
  7. 이태호, "Free mandrel에 의한 Metal 스피닝 기술," 제35회 한국추진공학회 2010년 추계 학술대회, 제주, 2010 11. 25-26, pp.241-244
  8. Klocke, Wehrmeister, "Laser-assisted metal spinning of advanced materials," 4the Lane Conference, Germany, 2003
  9. Ken Ichiro Mori, Minoru Ishiguro, Yuta Isomura, "Hot shear spinning of cast aluminium alloy parts," Journal of Materials Processing Technology, 209, 2009, pp.3621-3627 https://doi.org/10.1016/j.jmatprotec.2008.08.018
  10. Kitazawa, Wakabayashi et al, "A CNC incremental sheet metal forming method for priducing the shell components," Journal of JSTP 35, 1994, pp1348-1353
  11. Shima, Kotera, Murakami, "Development of flexible spin-forming method," Journal of the Japan Society for Technology of Plasticity, 38, 1997, pp.814-818
  12. Matsubara, S., "A Computer numerically controlled dieless incremental forming of sheet metal," Proceedings od Institution Of Mechanical Engineering Pare B, Journal of Engineering Manufacture, 215, 2001, pp.959-966 https://doi.org/10.1243/0954405011518863
  13. 이태호, "알루미늄 6061의 열처리에 대한 spinnability 연구," 충남대학교 석사 논문, 1980
  14. K. Kawai, L.-N. Yang, H. Kudo, "A flexible shear spinning of axi-symmetric shells with a general-purpose mandrel," Journal of Materials Processing technology, 192-193, 2007, pp.13-17 https://doi.org/10.1016/j.jmatprotec.2007.04.008
  15. Xi-Cheng Gao, Da-Chang Kang,Xiao-Feng Meng, "Experimental research on a new technology - ellipse spinning," Journal of Materials Processing Technology, 194, 1999, pp.197-200
  16. J. Jeswiet, F. Micari, G. Hirt, A. Bramley, J. Duflou, J. Allwood,, "Asymmetric single point incremental forming of sheet metal," CIRP Annals-Manufacturing Technology, Vol 54, Issue 2, 2005, pp.88-114 https://doi.org/10.1016/S0007-8506(07)60021-3
  17. C. C. Wong, T. A. Dean, J. Lin, "A review of spinning, shear forming and flow forming processes," International Journal of Machine Tools & Manufacture", 43, 2003, pp.1419-1435 https://doi.org/10.1016/S0890-6955(03)00172-X
  18. Ichiro Shimizu, "Asymmetric forming of aluminium sheets by synchronous spinning," Journal of Materials Processing Technology, 210, 2010, pp.585-592 https://doi.org/10.1016/j.jmatprotec.2009.11.002
  19. Chun-Ho Liu, "The simulation of the multi-pass and die-less spinning process," Journal of Materials Processing Technology, 102-103, 2007, pp.518-524
  20. Hiroshi Arai, "Robotic Metal Spinning- Forming non-axisymmetric products using force control," Proceedings of the IEEE International Confernece on Robotics and Automation, 2005, pp.2691-2695
  21. K. Kawai, L.-N. Yang, H. Kudo, "A flexible shear spinning of truncated conical shells with a general-purpose mandrel," Journal of Materials Processing technology, 113, 2001, pp.28-33 https://doi.org/10.1016/S0924-0136(01)00630-6
  22. Amano, T., Tamura, k., "The study of an elliptical cone spinning by the trial equipment," Third conference on rotary metalworking Processes, 1984, pp.213-224

Cited by

  1. Parametric Study on Determining Upper Length of Nonhomogeneous Pile installed in Clay vol.14, pp.5, 2013, https://doi.org/10.5762/KAIS.2013.14.5.2505