Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

Synthesis and Characterization of CdSe Quantum Dot with Injection Temperature and Reaction Time

Injection 온도 및 합성시간에 따른 CdSe 양자점 합성 및 특성

  • 엄누시아 (한국생산기술연구원 희소금속연구그룹) ;
  • 김택수 (한국생산기술연구원 희소금속연구그룹) ;
  • 좌용호 (한양대학교 기능성 나노재료 연구실) ;
  • 김범성 (한국생산기술연구원 희소금속연구그룹)
  • Received : 2012.02.06
  • Accepted : 2012.02.28
  • Published : 2012.03.27
Download PDF
⟨ Previous Next ⟩

Abstract

Compared with bulk material, quantum dots have received increasing attention due to their fascinating physical properties, including optical and electronic properties, which are due to the quantum confinement effect. Especially, Luminescent CdSe quantum dots have been highly investigated due to their tunable size-dependent photoluminescence across the visible spectrum. They are of great interest for technical applications such as light-emitting devices, lasers, and fluorescent labels. In particular, quantum dot-based light-emitting diodes emit high luminance. Quantum dots have very high luminescence properties because of their absorption coefficient and quantum efficiency, which are higher than those of typical dyes. CdSe quantum dots were synthesized as a function of the synthesis time and synthesis temperature. The photoluminescence properties were found strongly to depend on the reaction time and the temperature due to the core size changing. It was also observed that the photoluminescence intensity is decreased with the synthesis time due to the temperature dependence of the band gap. The wavelength of the synthesized quantum dots was about 550-700 nm and the intensity of the photoluminescence increased about 22~70%. After the CdSe quantum dots were synthesized, the particles were found to have grown until reaching a saturated concentration as time increased. Red shift occurred because of the particle growth. The microstructure and phase developments were measured by transmission electron microscopy (TEM) and X-ray diffractometry (XRD), respectively.

Keywords

References

  1. D. P. Thomas, B. M. Walsh and M. C. Gupta, Nano- technology, 22, 185503 (2011).
  2. M. G. Bawendi, M. L. Steigerwald and L. E. Brus, Annu. Rev. Phys. Chem., 41, 477 (1990). https://doi.org/10.1146/annurev.pc.41.100190.002401
  3. M. Bruchez, M. Moronne, P. Gin, S. Weiss and A. P. Alivisatos, Science, 281, 2013 (1998). https://doi.org/10.1126/science.281.5385.2013
  4. S. K. Poznyak, D. V. Talapin, E. V. Shevchenko and H. Weller, Nano Lett., 4, 693 (2004). https://doi.org/10.1021/nl049713w
  5. J. W. Lee, I. W. Lee and J. Lee, J. Clinical Otolaryngol., 20, 119 (2009). (in Korean).
  6. A. P. Alivisatos, Science, 271, 933 (1996). https://doi.org/10.1126/science.271.5251.933
  7. X. Peng, L. Manna, W. Yang, J. Wickham, E. Scher, A. Kadavanich and A. P. Alivistos, Nature, 404, 59 (2000). https://doi.org/10.1038/35003535
  8. C. B. Murray, D. J. Norris and M. G. Bawendi, J. Am. Chem. Soc., 115, 8706 (1993). https://doi.org/10.1021/ja00072a025
  9. V. Biju, Y. Makita, A. Sonoda, H. Yokoyama, Y. Baba and M. Ishikawa, J. Phys. Chem. B, 109, 13899 (2005). https://doi.org/10.1021/jp050424l
  10. S. H. Kang, K. Kumar, K. C. Son, H. H. Huh, K. H. Kim, C. Huh and E. T. Kim, Kor. J. Mater. Res., 18(7), 379 (2008). (in Korean). https://doi.org/10.3740/MRSK.2008.18.7.383
  11. G. G. Yordanov, H. Yoshimura and C. D. Dushkin, Colloid. Surface. Physicochem. Eng. Aspect., 322, 177 (2008). https://doi.org/10.1016/j.colsurfa.2008.03.002
  12. G. G. Yordanov, H. Yoshimura and C. D. Dushkin, Colloid Polymer Sci., 286, 1097 (2008). https://doi.org/10.1007/s00396-008-1886-y
  13. V. Biju, T. Itoh, A. Anas, A. Sujith and M. Ishikawa, Anal. Bioanal. Chem., 391, 2469 (2008). https://doi.org/10.1007/s00216-008-2185-7

Cited by

  1. Optical Characteristics of CdSe/ZnS Quantum Dot with Precursor Flow Rate Synthesized by using Microreactor vol.23, pp.2, 2016, https://doi.org/10.4150/KPMI.2016.23.2.91