References
- Nam, K. E., Oh, D. W., Song, C. H., Yoon, S. H., Lee, K. H., and Kim O. J., 2011, "An Experimental Study on Heat Transfer and Pressure Drop Characteristics of Plate-Fin Heat Exchanger with Variation in Fin Configuration", J. Fluid Mech, Vol. 20(5), pp. 449-464.
- Alpema, 2000, The Standard of the Brazed Aluminum Plate-fin Heat Exchanger Manufacturer's Association, ALPEMA.
- Feldman, A., Marvillet, C. and Lebouche M., 2000, "Nucleate and Convective Boiling in Plate Fin Heat Exchangers", Heat and Mass Transfer, 43, 3433-3442. https://doi.org/10.1016/S0017-9310(99)00203-3
- Wang, Y. Q., Dong, Q. W., Liu, M. S. and Wang, D., 2009, "Numerical Study on Plate-Fin Heat Exchangers with Plain Fins and Serrated Fins at Low Reynolds Number", Technol. Chem. Eng., Vol. 32(8), 1219-1226. https://doi.org/10.1002/ceat.200900079
- Peng, H. and Ling X., 2008, "Numerical Modeling and Experimental Verification of Flow and Heat Transfer over Serrated Fins at Low Reynolds Number", Experimental Thermal and Fluid Science, 32, 1039-1048. https://doi.org/10.1016/j.expthermflusci.2007.11.021
- Park, K. W and Choi, D. H., 2004, "Optimal Design of a Heat Exchanger with Vortex Generator", Transaction of the KSME, 1219-1224.
- Wen, J., Li, Y.Z., Zhou, A. M. and Ma, Y. S., 2006, "PIV Investigations of Flow Patterns in the Entrance Configuration of Plate-fin Heat Exchanger", Chinese J. Chem. Eng., Vol. 14(1), 15-23. https://doi.org/10.1016/S1004-9541(06)60032-3
- Lee, E. C., Kang, H., Heo, J. Y., Kim, Y. C., Park, J. H. and Cho, S. Y., 2011, "Numerical Study on the Distribution Characteristics of Aluminum Plate-Fin Heat Exchangers According to the Distributor Aspect Ratio", Journal of KSME, Vol. 35(8), 805-814. https://doi.org/10.3795/KSME-B.2011.35.8.805
- Gandhi, M. S., Ganguli, A. A., Joshi, J. B. and Vijayan, P. K., 2012, "CFD Simulation for Stream Distribution in Header and Tube Assemblies", Chemical Engineering Research and Design, 90, 487-506. https://doi.org/10.1016/j.cherd.2011.08.019
- Reneaume, J. M., Pingaud, H., Niclout, N., 2000, "Optimization of Plate Fin Heat Exchangers a Continuous Formulation, Institution of Chemical Engineers Transfer", 78, 849-859. https://doi.org/10.1205/026387600528058
- Zhang, Z. and Li, Y. Z., 2003, "CFD Simulation on Inlet Configuration of Plate-Fin Heat Exchangers", Cryogenics, 43, 673-678. https://doi.org/10.1016/S0011-2275(03)00179-6
- Jiao, A. J., 2003, Zhang, R. and Jeong, S. K., "Experimental Investigation of Header Configuration on Flow Maldistribution in Plate-Fin Heat Exchanger", Applied Thermal Engineering, 23, 1235-1246. https://doi.org/10.1016/S1359-4311(03)00057-7