DOI QR코드

DOI QR Code

Protection Distance Calculation Between Inductive Systems and Radiocommunication Services Using Frequency Below 30 MHz

30 MHz 이하에서 무선 서비스와 유도성 시스템 간의 보호 거리 산출

  • 심용섭 (공주대학교 정보통신공학과, 한국전자통신연구원 전파기술부 스마트전파인프라연구팀) ;
  • 이일규 (공주대학교 전기전자제어공학부) ;
  • 박승근 (한국전자통신연구원)
  • Received : 2012.07.31
  • Accepted : 2012.10.22
  • Published : 2012.12.28

Abstract

This paper describes separation distance to protect radiocommunication services from the interference of inductive systems using frequencies below 30 MHz for the co-existence between radiocommunication services and inductive systems. For the analysis, the interference scenario model is proposed between inductive system and radiocommunication services. Then the calculation method of protection distance is suggested by comparing the radiation power of inductive system with the allowable interference level of victim services, radiocommunication services, according to the applied propagation model. Also, the protection distance for protecting radiocommunication services in the 30 MHz below is calculated through the interference analysis from RFID(Radio Frequency IDentification) and PDP(Plasma Display Panel) TV based on the suggested method. The proposed calculation method was adopted as ITU-R recommendation in related with resolution 63 at ITU-R SG(Study Group) 1 meeting in June, 2012. It will be available to use for the protection of radiocommunication services from the interference of wireless power transfer system and power line telecommunication system.

본 논문은 30 MHz 이하에서 동작하는 유도성 시스템과 전파통신 서비스의 공존을 위해서, 유도성 시스템의 간섭으로부터 전파통신 서비스를 보호하기 위한 보호 거리에 관한 것이다. 보호 거리 산출을 위해 유도성 시스템과 전파통신 서비스 간의 간섭 시나리오 모델을 제시하고 이를 기반으로 유도성 시스템의 방사 전력과 희생원의 허용 가능한 전계 강도를 비교하여 적용된 전파 모델에 따른 보호 거리를 산출하는 방법을 제안하였으며 이 방법을 적용한 RFID(Radio Frequency IDentification), PDP(Plasma Display Panel) TV의 간섭 분석을 통해, 30 MHz 이하의 전파통신 서비스 보호를 위한 보호 거리를 도출하였다. 제안한 방법은 2012년 6월 SG(Study Group) 1 회의에서 ISM 기기에 대한 결의 63과 관련된 ITU-R 권고서로 채택되어 유도성 시스템뿐만 아니라 무선전력 전송 및 전력선 통신 등에 의한 간섭 영향 분석에 활용될 전망이다.

Keywords

References

  1. CISPR, "Industrial, scientific and medical (ISM) radio frequency equipment electromagnetic disturbance characteristics limit and methods of measurement," CISPR Publication 11, Jun. 2004.
  2. ITU-R, "Protection distance calculation between inductive systems and radiocommunication services using frequencies below 30 MHz," recommendation ITU-R SM.2028, Sep. 2012.
  3. ERC, "Propagation model and interference range calculation for Inductive Systems 10 kHz-30 MHz," ERC Report 69, Aug. 1999.
  4. IEC PAS 62825, "Methods of measurement and limits for radiated disturbances from plasma display panel TVs in the frequency range 150 kHz to 30 MHz," IEC/CISPR/I, Aug. 2012.
  5. ITU-R, "Radio noise," ITU-R Recommendation P.372, Oct. 2009.
  6. CEPT, "SEAMCAT Handbook," ECO, pp. 20, Jan. 2010.
  7. ITU-R, "Impact of devices using ultra-wideband technology on systems operating within radiocommunication services," ITU-R Recommendation SM.1757, May. 2006.
  8. ERC, "Compatibility study for generic limits for the emission levels of inductive SRDs below 30 MHz," ERC Report 67, Oct. 2005.
  9. ITU-R, "Ground-wave propagation curves for frequencies between 10 kHz and 30 MHz," ITU-R Recommendation P.368-9, Jan. 2007.
  10. Notification of Korea Communications Commission 2012-Number 12, "Radio equipment regulation," Mar. 2012.