Design & Manufacturing

Korean Society of Die & Mold Engineering (한국금형공학회)
권호 표지

A study on plastic mold design for robot shape and mold manufacture

로봇형상 플라스틱금형설계 및 제작에 관한 연구

  • Kim, Sei-hwan (Department of Metal Mold Design Engineering, Kongju National University) ;
  • Choi, Kye-kwang (Department of Metal Mold Design Engineering, Kongju National University)
  • 김세환 (공주대학교 금형설계공학과) ;
  • 최계광 (공주대학교 금형설계공학과)
  • Received : 2012.08.27
  • Accepted : 2012.11.30
  • Published : 2012.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study looks at plastic mold design for robots and mold manufacture, which is an injection mold branch at The Korea-China-Japan University Grand Prize Contest. Product analysis and layout, molding analysis, and upper and lower core design are carried out to design molds in 2D and 3D. After the design of the cores, NC machining software is used for simulation before actual manufacture. Before the production of end-product, test injection is done to troubleshoot problems like bad dimensions, burr, cracks and stepped pulley.

Keywords