DOI QR코드

DOI QR Code

순환 굵은골재 치환율에 따른 철근콘크리트 보의 전단거동

Shear Behavior of Reinforced Concrete Beams according to Replacement Ratio of Recycled Coarse Aggregate

  • Kim, Sang-Woo (Dept. of Architectural Engineering, Kongju National University) ;
  • Jeong, Chan-Yu (Dept. of Architectural Engineering, Kongju National University) ;
  • Jung, Chang-Kyo (TNI Structural Engineering) ;
  • Kim, Kil-Hee (Dept. of Architectural Engineering, Kongju National University)
  • 투고 : 2011.11.23
  • 심사 : 2012.03.02
  • 발행 : 2012.04.30

초록

이 연구에서는 순환 굵은골재를 사용한 철근콘크리트 보의 전단성능을 평가하였다. 순환 굵은골재의 치환율(0%, 50%, 100%)과 전단보강근의 유 무를 변수로 하여 총 6체의 실험체를 제작하였다. 실험체는 단순지지 형태로 4점 가력을 받도록 계획하였다. 천연 및 순환 굵은골재를 사용한 실험체의 거동을 예측하기 위하여 유한요소해석을 수행하였다. 유한요소해석은 수정 압축장 이론(MCFT)을 확장한 응력교란구역 모델(DSFM)에 바탕을 둔 2차원 비선형 유한요소해석 프로그램을 이용하여 수행하였다. 실험 결과, 순환 굵은골재 50%와 100%를 사용한 실험체와 천연골재를 사용한 실험체의 전단거동이 치환율과 전단보강근의 유무에 관계없이 서로 유사함을 알 수 있었다. 또한, 실험 결과와 해석 결과의 비교로부터 이 연구에서 제안된 수치해석 기법과 해석모델 DSFM이 순환 굵은골재를 사용한 철근콘크리트 보의 거동을 잘 예측할 수 있음을 확인할 수 있었다.

This study evaluates the shear performance of reinforced concrete beams with recycled coarse aggregates. A total of six specimens with various replacement ratios of recycled coarse aggregates (0%, 50%, and 100%) and different amount of shear reinforcement were cast and tested in this study. A finite element analysis was performed to predict the shear behavior of the specimens with natural or recycled coarse aggregates. The FE analysis was performed using a two-dimensional nonlinear FE analysis program based on the disturbed stress field model (DSFM), which is an extension of the modified compression field theory (MCFT). Experimental results showed that the specimens with 50% and 100% replacement ratios of recycled coarse aggregates had the similar shear strength compared to the specimen with natural aggregates, regardless of the replacement ratios of recycled coarse aggregates and the amount of the shear reinforcement. Furthermore, the comparison between experimental and analytical results showed that the proposed numerical modeling methods and the analytical model, DSFM, can be successfully used to predict the shear behavior of reinforced concrete beams with recycled coarse aggregates.

키워드

참고문헌

  1. 환경부, 전국폐기물발생 및 처리현황, 2010, pp. 1-36.
  2. 한국건설기술연구원, "대체골재를 사용한 콘크리트의 고품질화 기술 개발," 한국건설기술연구원, 2005, pp. 27-41.
  3. 한국표준협회, 콘크리트용 순환골재(KS F 2573), 2006, 10 pp.
  4. 국토해양부 기술기준과, 순환골재 품질기준, 2009, 83 pp.
  5. 이원석, 윤현도, "순환골재를 사용한 철근콘크리트 보의 전단성능," 대한건축학회논문집, 23권, 4호, 2007, pp. 19-26.
  6. 이경희, "재생골재를 사용한 철근콘크리트 보의 전단성능과 휨성능에 관한 실험적 연구," 충남대학교 석사학위논문, 2002, 73 pp.
  7. 한국표준협회, 콘크리트 압축 강도 시험방법(KS F 2405), 한국표준협회, 2010, 8 pp.
  8. 한국표준협회, 금속 재료 인장 시험 방법(KS B 0802), 한국표준협회, 2003, 9 pp.
  9. ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318M-08) and Commentary, American Concrete Institute, Farmington Hill, MI, 2008, 473 pp.
  10. 日本建築學會, 鐵筋コソクリ一ト構造計算規準.同解說, 日本建築學會, 1999, 139 pp.
  11. Bentz, E. C., "Empirical Modeling of Reinforced Concrete Shear Strength Size Effect for Members without Stirrups," ACI Structural Journal, Vol. 102, No. 2, 2005, pp. 232-241.
  12. Kani, G. N. J., "How Safe Are Our Large Reinforced Concrete Beams?" ACI Journal, Proceedings, Vol. 64, No. 3, 1967, pp. 128-141.
  13. Vecchio, F. J., "Disturbed Stress Field Model for Reinforced Concrete: Validation," Journal of Structural Engineering, ASCE, Vol. 127, No. 4, 2001, pp. 350-358. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:4(350)
  14. Vecchio, F. J. and Collins, M. P., "The Modified Compression Field Theory for Reinforced Concrete Elements Subjected to Shear," ACI Journal, Proceedings, Vol. 83, No. 2, 1986, pp. 219-231.
  15. Vecchio, F. J., http://www.civ.utoronto.ca/vector/, Web Address of Program VecTor2, Ver. 5.1, 2006.
  16. Lee, J. Y., Choi, I. J., and Kim, S. W., "Shear Behavior of Reinforced Concrete Beams With High Strength Stirrups," ACI Structural Journal, Vol. 108, No. 5, 2011, pp. 620-629.
  17. Kim, S. W. and Vecchio, F. J., "Modeling of Shear-Critical Reinforced Concrete Structures Repaired with Fiber-Reinforced Polymer Composites," Journal of Structural Engineering, ASCE, Vol. 134, No. 8, 2008, pp. 1288-1299. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:8(1288)
  18. Wong, P. S. and Vecchio, F. J., "VecTor2 and Form Works User's Manual," Technical Report, Department of Civil Engineering, University of Toronto, Canada, 2002 (available at http://www.civ.utoronto.ca/vector/).
  19. Bentz, E. C., http://www.civ.utoronto.ca/vector, Web Address of Program Augustus, Ver. 5.0.3, 2006.