Journal of IKEEE (전기전자학회논문지)

Institute of Korean Electrical and Electronics Engineers (한국전기전자학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation for Lifetime and Thermal Ratings for Aged Overhead Transmission Lines

노후 가공송전선의 수명과 열용량의 평가

  • Kim, Sung-Duck (Department of Electrical, Electronic and Control Engineering, Hanbat National University)
  • 김성덕 (한밭대학교 전기전자제어공학부)
  • Received : 2011.12.23
  • Accepted : 2012.01.31
  • Published : 2012.03.30
Download PDF
⟨ Previous Next ⟩

Abstract

Thermal rating or lifetime evaluation for aged overhead transmission line becomes more important concerns with respect to keeping power delivery stable having proper capability. Both load rating and dip/clearance are essential factors to determine transmission capacity. In order to evaluate thermal rating and conductor lifetime for domestic transmission lines with double-circuit, the dip/ground clearance standards as well as the electrical equipment technical standard are examined. Conductor temperature and dip are calculated under the assumption of a contingency, and then, a method to up-rate load capacity is searched. As thermal rating and limit dip for aged conductor are properly evaluated, an improved strategy in order to guarantee the existing power system reliability is presented in this paper.

적절한 송전용량으로 전력공급을 안정하게 유지하기 위하여 노후 가공송전선의 열용량이나 수명 평가가 더욱 중요한 관심사가 되었다. 부하정격과 이도/이격거리 모두는 송전용량을 결정하는 중요한 요소들이다. 국내의 2회선 송전선로에 대한 열용량 및 도체수명을 평가하기 위하여, 전기설비기술기준은 물론 이도 및 지상고에 대한 설계기준들이 검토된다. 상정사고를 가정하여 도체온도와 이도를 계산하고 부하용량을 증대시키기 위한 방안이 모색되었다. 본 논문에서는 노후 도체에 대한 열용량과 한계이도를 적절히 평가함으로써, 기존 전력계통의 신뢰성을 보장하기 위한 개선 방안이 제시되었다.

Keywords

References

  1. A.K. David and F. Wen, "Transmission planning and investment under competitive electricity market environment", 2001 Power Engineering Society Summer Meeting, Vol. 3, pp. 1725-1730, 2001.
  2. IEEE Standard 738, IEEE Standard for Calculating the Current-Temperature of Bare Overhead Conductors, 2006.
  3. K.M. Klein, P.L. Springer, and W.Z. Black, "Real-time ampacity and ground clearance software for integration into smart grid technology", IEEE Transactions on Power Delivery, Vol. 25, Issue 3, pp. 1768-1777, 2010. https://doi.org/10.1109/TPWRD.2010.2044896
  4. CIGRE'' WG26_B2, ""Sag-tension calculation for overhead lines"" TB 324 june 2007.
  5. 가공송전선의 전류용량, 일본 전기학회 기술보고 제660호, 1997.
  6. J.M. Ferguson, and R.R. Gibbon, "Overhead transmission lines-refurbishment and developments", Power Engineering Journal, Vol. 8, No. 3, pp. 109-118, 1994. https://doi.org/10.1049/pe:19940303
  7. 가공선 이도 설계기준 - 1211, 한국전력공사, 2003.
  8. K. Kopsidas, and S.M. Rowland, "Evaluating opportunities for increasing power capacity of existing overhead line systems", Generation, Transmission & Distribution, IET, Volume: 5, Issue: 1, pp.1-10, 2011. https://doi.org/10.1049/iet-gtd.2010.0227
  9. S. Edward, "Risk analysis in dynamic thermal overhead line rating", 2006 International Conference on Probabilistic Methods Applied to Power Systems, pp. 1-5, 2006.
  10. 송전선으로 지상고 기준 - 1020, 한국전력공사, 2003.
  11. D.G. Harvard, et. al, "Aged ACSR conductors. II. Prediction of remaining life", IEEE Transactions on Power Delivery, Vol. 7, No. 2, pp. 588-595, 1992. https://doi.org/10.1109/61.127053
  12. 가공송전선용 도체 선정기준 - 1210, 한국전력공사, 2003.