DOI QR코드

DOI QR Code

3D Finite element analysis of end - plate steel joints

  • Drosopoulos, G.A. (Department of Production Engineering and Management, Technical University of Crete) ;
  • Stavroulakis, G.E. (Department of Production Engineering and Management, Technical University of Crete) ;
  • Abdalla, K.M. (Department of Civil Engineering, Jordan University of Science & Technology)
  • 투고 : 2010.07.03
  • 심사 : 2011.10.27
  • 발행 : 2012.02.25

초록

This paper presents a numerical investigation of the mechanical behaviour of extended end - plate steel connections including comparison with full size experiments. Contact and friction laws have been taken into account with nonlinear, three dimensional finite element analysis. Material and geometric nonlinearities have been implemented to the model, as well. Results are then compared with experimental tests conducted at the Jordan University of Science and Technology. According to the most significant observation of the analysis, a separation of the column flange from the extended end - plate occurs. Other important structural parameters of the connection, like the impact of some column stiffeners on the overall response, local buckling of the column and friction of the beam to column interface, have been examined as well.

키워드

참고문헌

  1. Abdalla, K.M., Abu-Farsakh, G.A.R. and Barakat, S.A., (2007), "Experimental investigation of force - distribution in high - strength bolts in extended end - plate connections", Steel Compos. Struct., An Int'l J., 7(2).
  2. Abdalla, K.M. and Stavroulakis, G.E. (1989), "Zur rationalen Berechnung des 'Prying Actions' phaenomens in Schraubenverbindungen", Stahlbau, 58(8), 233-238.
  3. Abolmaali, A., Matthys, J.H., Farooqi, M. and Choi, Y. (2005), "Development of moment-rotation model equations for flush end - plate connections", J. Constr. Steel Res. Int., 61(12), 1595-1612. https://doi.org/10.1016/j.jcsr.2005.05.004
  4. Attiogbe, G. and Morris, G. (1991), "Moment_rotation functions for steel connections", J. Struct. Eng ASCE, 117(6), 1703-1718. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:6(1703)
  5. Baniotopoulos, C.C. (1995), "On the separation problem in bolted steel splice plates", J. Construct. Steel Res. 32(1), 15-33. https://doi.org/10.1016/0143-974X(94)00008-6
  6. Bursi, O.S. and Jaspart, J.P. (1997), "Calibration of a finite element model for isolated bolted end - plate steel connections", J. Constr. Steel Res. Int., 44(3), 225-262. https://doi.org/10.1016/S0143-974X(97)00056-4
  7. Choi, C.K. and Chung, G.T. (1996), "A gap element for three-dimensional elasto-plastic contact problems", Comput. Struct., 61(6), 1155-1167. https://doi.org/10.1016/0045-7949(96)00111-3
  8. Christensen, P.W., Klarbring, A., Pang, J.S. and Stromberg, N. (1998), "Formulation and comparison of algorithms for frictional contact problems", Int. J. Number Meth. Eng. 42(1), 145-173. https://doi.org/10.1002/(SICI)1097-0207(19980515)42:1<145::AID-NME358>3.0.CO;2-L
  9. Gantes, C.J. and Lemonis, M.E. (2003), "Influence of equivalent bolt length in finite element modeling of T-stub steel connections", Comput. Struct., 81(8-11), 595-604. https://doi.org/10.1016/S0045-7949(03)00004-X
  10. Gebbeken, N., Rothert, H. and Binder, B. (1994), "On the numerical analysis of end - plate connections", J. Construct. Steel Res. Int., 30(2), 177-196. https://doi.org/10.1016/0143-974X(94)90049-3
  11. Girao Coelho, A.M., Bijlaard, F., Gresnigt, N. and Simoes da Sliva, L. (2004), "Experimental assessment of the behavior of bolted T-stub connections made up of welded plates", J. Constr. Steel Res. Int., 60(2), 269-311. https://doi.org/10.1016/j.jcsr.2003.08.008
  12. Girao Coelho, A.M., Bijlaard, F. and Simoes da Sliva, L. (2004), "Experimental assessment of ductility of extended end - plate connections", Eng. Struct., 26(9), 1185-1206. https://doi.org/10.1016/j.engstruct.2000.09.001
  13. Kishi, N. and Chen, W.F. (1990), "Moment-rotation relations of semi rigid connections with angles", J. Struct. Eng-ASCE, 116(7), 1813-1834. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:7(1813)
  14. Kiymaz, G. (2009), "Investigations on the bearing strength of stainless steel bolted plates under in-plane tension", Steel Compos. Struct., An Int'l J., 9(2).
  15. Krishnamurthy, N. (1975), Two dimensional finite element analysis of extended and flush end - plate connections with multiple rows of bolts, Report to AISC and MBMA, no. CE-AISC-MBMA-6, Dept. of Civil Engineering, Auburn University.
  16. Krishnamurthy, N (1978), "Fresh look at bolted end - plate behavior and design", Eng. J., AISC.
  17. Krishnamurthy, N. and Graddy, D.E. (1976), "Correlation between 2 and 3 dimensional finite element analysis of steel bolted end - plate connections", Comput. Struct. Int., 6(4-5), 381-389. https://doi.org/10.1016/0045-7949(76)90016-X
  18. Lemonis, M.E. and Gantes, C.J. (2009), "Mechanical modeling of the nonlinear response of beam - to - column joints", J. Constr. Steel Res. Int., 65, 879-890 https://doi.org/10.1016/j.jcsr.2008.11.007
  19. Maggi, Y.I., Goncalves, R.M., Leon, R.T and Ribeiro, L.F.L. (2005), "Parametric analysis of steel bolted end - plate connections using finite element modelling", J. Constr. Steel Res. Int., 61(5), 689-708. https://doi.org/10.1016/j.jcsr.2004.12.001
  20. Meng, R. (1996), Design of moment end - plate connections for seismic loading, Doctoral Dissertation, Virginia Polytechnic Institute and State University, Blacksburg, Virginia.
  21. Mistakidis, E.S., Baniotopoulos, C.C., Bisbos, C.D. and Panagiotopoulos, P.C. (1996), "Steel T-Stub connection under static loading: An effective 2-D numerical model", J. Construct. Steel Res. Int., 44(1-2), 51-67.
  22. Nogueiro, P., Simoes da Silva, L., Bento, R. and Simoes, R. (2009), "Calibration of model parameters for the cyclic response of end-plate beam-to-column steel-concrete composite joints", Steel Compos. Struct., An Int'l J., 9(1).
  23. Panagiotopoulos, P.D. (1985), Inequality problems in mechanics and applications. Convex and nonconvex energy functions, Birkhäuser Verlag, Boston, Basel, Stuttgart.
  24. Pucinotti, R. (2001), "Top-and-seat and web angle connections: Prediction via mechanical model", J. Construct. Steel Res. Int., 57(6), 661-694.
  25. Saravanan, M., Arul Jayachandran, S., Marimuthu, V. and Prabha, P. (2009), "Advanced analysis of cyclic behaviour of plane steel frames with semi - rigid connections", Steel Compos. Struct., An Int'l J., 9(4).
  26. Shi, G., Shi, Y., Wang, Y. and Bradford, M.A. (2008), "Numerical simulation of steel pretensioned bolted end - plate connections of different types and details", Eng. Struct., 30(10), 2677-2686. https://doi.org/10.1016/j.engstruct.2008.02.013
  27. Silva, L.S. and Coelho, A.M.G. (2001), "A ductility model for steel connections", J. Const. Steel Res. Int., 57(1), 45-70. https://doi.org/10.1016/S0143-974X(00)00009-2
  28. Stavroulaki, M.E. and Stavroulakis, G.E. (2002), "Unilateral contact applications using FEM software", Int. J. Appl. Math. Comput. Sci., 12, 101-111.
  29. Stavroulakis, G.E. and Antes H. (2000), "Nonlinear equation approach for inequality elastostatics: a twodimensional BEM implementation", Comput. Struct, 75 (6), 631-646. https://doi.org/10.1016/S0045-7949(99)00111-X
  30. Wu, F.H. and Chen, W.F. (1990), "A design model for semi-rigid connections", Eng. Struct., 12, 88-97. https://doi.org/10.1016/0141-0296(90)90013-I
  31. Yee, Y.L. and Melchers, R.E. (1986), "Moment - rotation curves for bolted connections", J. Struct. Eng-ASCE, 112(3), 615-635. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:3(615)

피인용 문헌

  1. Nonlinear finite element analysis of loading transferred from column to socket base vol.11, pp.5, 2013, https://doi.org/10.12989/cac.2013.11.5.475
  2. Finite Element Analysis of Beam to Column Bolted Connection – A Review vol.10, pp.8, 2017, https://doi.org/10.17485/ijst/2017/v10i8/111225
  3. Moment-Rotation Model for Blind-Bolted Flush End-Plate Connections in Composite Frame Structures vol.141, pp.9, 2015, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001147
  4. A Novel Approach for Bolted T-Stub Connections vol.18, pp.3, 2018, https://doi.org/10.1007/s13296-018-0034-x
  5. Seismic Performance of Endplate Connections between Steel Reinforced Concrete Walls and Steel Beams vol.28, pp.2, 2018, https://doi.org/10.1080/10168664.2018.1455490
  6. Behavior of Extended End-Plate Steel Beam to Column Connections vol.12, pp.None, 2012, https://doi.org/10.2174/1874149501812010250
  7. Analysis of Additional Load and Fatigue Life of Preloaded Bolts in a Flange Joint Considering a Bolt Bending Load vol.11, pp.3, 2021, https://doi.org/10.3390/met11030449