Journal of Biosystems Engineering

  • 제37권2호
  • /
  • Pages.82-89
  • /
  • 2012
  • /
  • 1738-1266(pISSN)
  • /
  • 2234-1862(eISSN)
한국농업기계학회 (Korean Society for Agricultural Machinery)
권호 표지
DOI QR코드

DOI QR Code

Simulation and Model Validation of a Pneumatic Conveying Drying for Wood Dust Particles

  • Bhattarai, Sujala (Department of Biosystems Engineering, Kangwon National University) ;
  • Kim, Dae-Hyun (Department of Biosystems Engineering, Kangwon National University) ;
  • Oh, Jae-Heun (Forest Practice Research Center, Korea Forest Research Institute)
  • 투고 : 2012.03.26
  • 심사 : 2012.04.27
  • 발행 : 2012.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Purpose: The simulation model of a pneumatic conveying drying (PCD) for sawdust was developed and verified with the experiments. Method: The thermal behavior and mass transfer of a PCD were modeled and investigated by comparing the experimental results given by a reference (Kamei et al. 1952) to validate the model. Momentum, energy and mass balance, one dimensional first order ordinary differential equations, were coded and solved into Matlab V. 7.1.0 (2009). Results: The simulation results showed that the moisture content reduced from 194% to 40% (dry basis), air temperature decreased from $512^{\circ}C$ to $128^{\circ}C$ with the particle residence time of 0.7 seconds. The statistical indicators, root mean square error and R-squared, were calculated to be 0.079, and 0.998, respectively, between the measured and predicted values of moisture content. The relative error between the measured and predicted values of the final pressured drop, air temperature, and air velocity were only 8.96%, 0.39% and 1.05% respectively. Conclusions: The predicted moisture content, final temperature, and pressure drop values were in good agreement with the experimental results. The developed model can be used for design and estimation of PCD system for drying of wood dust particles.

키워드

참고문헌

  1. Baeyens J., D. V. Gauwbergen and L. Vinckier. 1995. Pneumatic Drying: The use of large scale data in the design procedure. Powder Technology 83:139-148. https://doi.org/10.1016/0032-5910(94)02945-K
  2. Han, T., A. Levy and Y. Peng. 2000. Model for dilute gas particle flow in constant area lance with heating and friction. Powder technology 112:283-288. https://doi.org/10.1016/S0032-5910(00)00303-X
  3. Jamaleddine, J. T. and M. B. Ray. 2011. Drying of Sludge in a Pneumatic Dryer Using Computational Fluid Dynamics. Drying Technology 29(3):308-322. https://doi.org/10.1080/07373937.2010.496095
  4. Kamei S. and R. Toei. 1952. Studies on pneumatic conveying drying. Kagaku Kogaku 16:297-300. (In Japanese, with English abstract).
  5. Kim, D. H., B. M. Jenkins, T. R. Rumsey, M. W. Yore and N. J. Kim. 2007 Simulation and model validation of a horizontal shallow basin solar concentrator, Solar Energy 81: 463-475. https://doi.org/10.1016/j.solener.2006.08.007
  6. Lehtikangas, P. 2001. Quality properties of pelletised sawdust, logging residuals and bark. Biomass and Bioenergy 20:351-360. https://doi.org/10.1016/S0961-9534(00)00092-1
  7. Matsumoto, S. and D. C. T. Pei. 1984. A mathematical analysis of pneumatic drying of grains-I. Constant drying rate, Journal of heat and mass transfer, 27(6):743-849.
  8. Narimatsu, C. P., M. C. Ferreira and J. T. Freire. 2007. Drying of Coarse Particles in a Vertical Pneumatic Conveyor. Drying Technology 25(2):291-302. https://doi.org/10.1080/07373930601119599
  9. Pakowski, Z., B. Krupinska and R. Adamski. 2007. Prediction of sorption equilibrium both in air and superheated steam drying of energetic variety of Willo Salix Viminalis in a wide temperature range. Fuel 1749-1757.
  10. Pelegrina, A. H. and G. H. Crapiste. 2000. Modelling the pneumatic drying of food particles. Journal of Food Engineering 48:301-310.
  11. Stahl, M., K. Granstrom, J. Berghel and R. Renstrom. 2004. Industrial processes for biomass drying and their effects on the quality properties of wood pellets. Biomass and Bioenergy 27:621-628. https://doi.org/10.1016/j.biombioe.2003.08.019
  12. Stone, R. J. 1993. Improved statistical procedure for the evaluation of solar radiation estimation models, Solar Energy 51(4):289-291. https://doi.org/10.1016/0038-092X(93)90124-7
  13. Tanaka, F., T. Uchino, D. Hamanaka and G. G. Atungulu. 2008. Mathematical modeling of pneumatic drying of rice powder. Journal of food Engineering 88:492-498. https://doi.org/10.1016/j.jfoodeng.2008.03.014
  14. Tanaka, F., Y. Maeda, T. Uchino, D. Hamanaka and G. G. Atungulu. 2008 (a). Monte Carlo simulation of the collective behavior of food particles in pneumatic drying operation. Food science and technology 41: 1567-1574. https://doi.org/10.1016/j.lwt.2007.10.020
  15. Tanaka, F., Y. Maeda, T. Uchino, D. Hamanaka and G. G. Atungulu. 2008 (b). Monte Carlo simulation of the collective behavior of food particles in pneumatic drying operation. Food science and technology 41: 1567-1574. https://doi.org/10.1016/j.lwt.2007.10.020
  16. Yerushalmi, J. and N. T. Cankurt. 1979. Further Studies on the regimes of Fluidization. Powder Technology 24: 187- 205. https://doi.org/10.1016/0032-5910(79)87036-9
  17. Younsi, R., D. Kocaefe, S. Poncsak and Y. Kocaefe. 2006. A diffusion model for transient high temperature treatment of wood. Journal of Building Physics 30:113.

피인용 문헌

  1. Ensiling of fish industry waste for biogas production: A lab scale evaluation of biochemical methane potential (BMP) and kinetics vol.127, 2013, https://doi.org/10.1016/j.biortech.2012.09.032
  2. Kinetic Study of the Anaerobic Digestion of Swine Manure at Mesophilic Temperature: A Lab Scale Batch Operation vol.37, pp.4, 2012, https://doi.org/10.5307/JBE.2012.37.4.233
  3. Evaluation of the Biogas Productivity Potential of Fish Waste: A Lab Scale Batch Study vol.37, pp.5, 2012, https://doi.org/10.5307/JBE.2012.37.5.302