Preparation and Characterization of Chemically Stable PVDF-HFP Asymmetric Microfiltration (MF) Membranes

  • Lee, Yeon-Ee (Applied Chemistry Division, Korea Research Institute Chemical Technology) ;
  • JeGal, Jong-Geon (Applied Chemistry Division, Korea Research Institute Chemical Technology)
  • Received : 2012.02.28
  • Accepted : 2012.04.25
  • Published : 2012.04.30

Abstract

Chemically stable Polyvinylidene fluoride-hexa-fluoropropane (PVDF-HFP) copolymer asymmetric membranes were prepared by the conventional phase inversion process, using Dimethyacetamide (DMAc) as a solvent and water as a non-solvent. To control the pore size and porosity of the PVDF-HFP membranes, tetra-ethoxysilane (TEOS) was used as a pore-forming agent. The prepared membranes were characterized, using several analytical methods such as Fourier Transform Infrared spectroscopy (FTIR), Thermo-gravimetric analyzer (TGA), Field Emission Scanning Electronic Microscopy (FESEM). TEOS turned out to increase porosity and make homogeneous pores on the membranes. Depending on the composition of the dope solutions, the pore size was ranged from 0.1 to 1.0 ${\mu}m$. The flux of the PVDF-HFP membranes prepared by using TEOS as a pore forming agent was increased substantially without much decrease in the rejection. When 15 wt% PVDF-HFP solution was blended with 13 wt% TEOS solution at composition ratio of 70/30 in wt%, the water flux at 2 bars was about 2 $m^3/m^2day$.

Keywords

References

  1. J. E. Mark, C. Y-C Lee, and P. A. Bianconi, "Hybrid organic-inorganic composite", 585 (1995).
  2. J. Wen and G. Wilkes, "Organic/inorganic hybrid network materials by the Sol-Gel approach", J. Mater. Chem., 8, 1667 (1996). https://doi.org/10.1021/cm9601143
  3. P. Judeinstein and C. Sanchez, "Hybrid organic - Inorganic materials : a land of multidisciplinarity", J. Mater. Chem. 6, 511 (1996). https://doi.org/10.1039/jm9960600511
  4. J. W. Cho and K. I. Sul, "Characterization and properties of hybrid composites prepared from poly (vinylidene fluirude-tetrefluroethylene) and $SiO_2$", Polymer, 42, 727 (2001). https://doi.org/10.1016/S0032-3861(00)00371-2
  5. S. H. Yeom, Y. S. Chung, W. T. Lee, S. I. Kim, and J. H. Kim, "Preparation and gas permeation properties of polyimide-silica hybrid membranes", Membrane Journal, 11, 116 (2001).
  6. S. Yano, K. Iwata, and K. Kurita, "Properties and structure of organic-inorganic hybrid materials produces by sol-gel process", J. Mater. Sci. Eng., C6, 75 (1998).
  7. D. S. Kim, H. B. Park, Y. M. Lee, and Y. H. Park, "Preparation and characterization of PVDF/ silica hybrid membranes containing sulfonic acid groups", J. Appl. Polym. Sci., 93, 209 (2004). https://doi.org/10.1002/app.20451
  8. H. C. Park, Y. P. Kim, H. Y. Kim, and Y. S. Kang, "Membrane formation by water vapor induced phase inversion", J. Membr. Sci., 156, 169 (1999). https://doi.org/10.1016/S0376-7388(98)00359-7
  9. P. Van de Witte, P. J. Dijkstra, J. W. A. Van den Berg, and B. J. Feijin, "Phase separation processes in polymer solutions in relation to membrane formation", J. Membr. Sci., 117, 1 (1996). https://doi.org/10.1016/0376-7388(96)00088-9
  10. H. S. Nalwa, "Ferroelectric polymers; Part 1", Marcel Dekker, New York (1995).
  11. N. W. Kim, "Preparation and characteristics of fouling resistant nanofiltration membranes", Membrane Journal, 17, 44 (2007).
  12. N. W. Kim, "Study of surface properties on fouling resistance of reverse osmosis membranes", Membrane Journal, 12, 28 (2002).
  13. Y. G. Kim, N. W. Kim, and Y. T. Lee, "A study on chlorine resistance improvement of reverse osmosis membrane by surface modification", Membrane Journal, 15, 320 (2005).