한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제29권5호
  • /
  • Pages.489-493
  • /
  • 2012
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

ATC Test Bench 개발 및 성능평가에 관한 연구

A Study on the Development and Performance Evaluation of an ATC Test Bench

  • 김재현 (창원대학교 기계설계공학과) ;
  • 최준영 (창원대학교 기계설계공학과) ;
  • 이춘만 (창원대학교 기계설계공학과)
  • Kim, Jae-Hyun (Department of Mechanical Design and Manufacturing Engineering, Changwon National Univ.) ;
  • Choi, Jun-Young (Department of Mechanical Design and Manufacturing Engineering, Changwon National Univ.) ;
  • Lee, Choon-Man (Department of Mechanical Design and Manufacturing Engineering, Changwon National Univ.)
  • 투고 : 2012.03.08
  • 심사 : 2012.03.23
  • 발행 : 2012.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Automatic tool changers(ATCs) store tools used in a machining center to its magazine and changes the tools automatically. Tools of machine centers are changed and then precisely equipped to spindle system by the ATC. Therefore, the stability and reliability of the ATC is very important. But, there is lack of development and evaluation on basic performance and vibration of the ATCs. So, in this study, a BT40 ATC test bench was developed to verify stability and reliability of BT40 ATCs.

키워드

참고문헌

  1. Cha, S. K., "Reducing the Manufacturing Lead Time for Machine Tool," Retired Scientists and Engineers for Advancement of Technology Report, pp. 24-42, 2004.
  2. Kim, S. Y., Lee, S. G., Choi, M. C., Jung, H. H. and Kim, C. S., "A Study on the Design and Stability for Matrix type Automatic Tool Changer," Proc. of KSMPE Autumn Conference, pp. 92-93, 2009.
  3. Her, Y. J., Lim, S. H. and Lee, C. M., "A Study on the Topology Optimization of the Fixed Address Type ATC Frame Using a Real Number Coding Genetic Algorithm," Journal of KSPE, Vol. 21, No. 9, pp. 174-181, 2004.
  4. Her, Y. J. and Lee, C. M., "A Study on the Development of Fixed Address Type Automatic Tool Changer," Proc. of KSPE Autumn Conference, pp. 174-181, 2003.
  5. Park, T. Y, "Design of Automatic Tool Changer," Department of Mechanical Science, Degree of Master, Korea Advanced Institute of Science and Technology, 1977.
  6. Han, D. C., "Development of Control System for High-Speed ATC of Machining Center," Department of Electrical Engineering, Degree of Master, Yeungnam University, 2001.
  7. Sim, Y. I., "Machining Technology of Hybrid Machine," Report of Korea Institute of Science and Technology, pp. 1-4, 2009.
  8. Kim, J. H., Lee, M. J. and Lee. C. M., "A Study on the Development of ATC Test Bench for BT40," Proc. of KSTEM Autumn Conference, pp. 223-225, 2010.
  9. Bae, Y. M., "Technology Trend of Automatic Tool Changer," Report of Korea Institute of Science and Technology Information, pp. 3-20, 2003.
  10. Kim, J. H., Kweon, Y. G. and Lee, C. M., "A Study on the Structural Analysis and Modal Analysis of Magazine Type Automatic Tool Changer," Proc. of KSMPE Autumn Conference, pp. 93-94, 2010.
  11. Kim, J. H., Lee, M. J. and Lee, C. M., "Geometric optimal design of an ATC arm using design of experiments," Proc. of the IASTED International Conference, pp. 357-362, 2010.

피인용 문헌

  1. The Technical Trend and Future Development Direction of Machine Tools Automatic Tool Changer by Patent Mapping vol.30, pp.3, 2013, https://doi.org/10.7736/KSPE.2013.30.3.266