References
- Adell R, Lekholm U, Rockler B, Bra nemark PI. A 15-year study of osseointegrated implants in the treatment of the edentulous jaw. Int J Oral Surg 1981;10:387-416. https://doi.org/10.1016/S0300-9785(81)80077-4
- Goodacre CJ, Bernal G, Rungcharassaeng K, Kan JY. Clinical complications with implants and implant prostheses. J Prosthet Dent 2003;90:121-32. https://doi.org/10.1016/S0022-3913(03)00212-9
- Becker W, Becker BE. Replacement of maxillary and mandibular molars with single endosseous implant restorations: a retrospective study. J Prosthet Dent 1995;74:51-5. https://doi.org/10.1016/S0022-3913(05)80229-X
- Jemt T, Linden B, Lekholm U. Failures and complications in 127 consecutively placed fixed partial prostheses supported by Bra nemark implants: from prosthetic treatment to first annual checkup. Int J Oral Maxillofac Implants 1992;7:40-4.
- Quek HC, Tan KB, Nicholls JI. Load fatigue performance of four implant-abutment interface designs: effect of torque level and implant system. Int J Oral Maxillofac Implants 2008;23:253-62.
- Simon RL. Single implant-supported molar and premolar crowns: a ten-year retrospective clinical report. J Prosthet Dent 2003;90:517-21. https://doi.org/10.1016/j.prosdent.2003.08.025
- Jemt T, Laney WR, Harris D, Henry PJ, Krogh PH Jr, Polizzi G, Zarb GA, Herrmann I. Osseointegrated implants for single tooth replacement: a 1-year report from a multicenter prospective study. Int J Oral Maxillofac Implants 1991;6:29-36.
- Jorneus L, Jemt T, Carlsson L. Loads and designs of screw joints for single crowns supported by osseointegrated implants. Int J Oral Maxillofac Implants 1992;7:353-9.
- Shigley JE, Mische CR. Standard Handbook of Machine Designs. New York; McGraw-Hill; 1986. p. 16-23.
- Kim KS, Lim YJ, Kim MJ, Kwon HB, Yang JH, Lee JB, Yim SH. Variation in the total lengths of abutment/implant assemblies generated with a function of applied tightening torque in external and internal implant-abutment connection. Clin Oral Implants Res 2011;22:834-9. https://doi.org/10.1111/j.1600-0501.2010.02063.x
- Siamos G, Winkler S, Boberick KG. Relationship between implant preload and screw loosening on implant-supported prostheses. J Oral Implantol 2002;28:67-73. https://doi.org/10.1563/1548-1336(2002)028<0067:TRBIPA>2.3.CO;2
- Ricciardi Coppede A, de Mattos Mda G, Rodrigues RC, Ribeiro RF. Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study. Clin Oral Implants Res 2009;20: 624-32.
- Weiss EI, Kozak D, Gross MD. Effect of repeated closures on opening torque values in seven abutment-implant systems. J Prosthet Dent 2000;84:194-9. https://doi.org/10.1067/mpr.2000.108069
- Lewis S, Avera S, Engleman M, Beumer J 3rd. The restoration of improperly inclined osseointegrated implants. Int J Oral Maxillofac Implants 1989;4:147-52.
- Lewis SG, Llamas D, Avera S. The UCLA abutment: a four-year review. J Prosthet Dent 1992;67:509-15. https://doi.org/10.1016/0022-3913(92)90082-L
- Carotenuto G, Palumbo M, Zarone F, Nicolais L. Characterization of the interface between prefabricated gold copings and cast dental alloy in implant restorations. Clin Oral Implants Res 1999;10:131-8. https://doi.org/10.1034/j.1600-0501.1999.100207.x
- O'Brien WJ. Base metal casting alloys. In: O'Brien WJ, editor. Dental material and their selection. Quintessence; 1997. p. 259-268.
- Kano SC, Bonfante G, Hussne R, Siqueira AF. Use of base metal casting alloys for implant framework: marginal accuracy analysis. J Appl Oral Sci 2004;12:337-43. https://doi.org/10.1590/S1678-77572004000400016
- Lim JH, Lee MR, Cho IH. A study on the photoelastic analysis of stresses induced by the connection modalities between natural tooth abutment and dental implant. J Dankook Dent Res Inst 1992;4:141-51.
- Artzi Z, Dreiangel A. A screw lock for single-tooth implant superstructures. J Am Dent Assoc 1999;130:677-82. https://doi.org/10.14219/jada.archive.1999.0277
- Schwarz MS. Mechanical complications of dental implants. Clin Oral Implants Res 2000;11:156-8. https://doi.org/10.1034/j.1600-0501.2000.011S1156.x
- Cavazos E, Bell FA. Preventing loosening of implant abutment screws. J Prosthet Dent 1996;75:566-9. https://doi.org/10.1016/S0022-3913(96)90464-3
- Kang YM, Lim JH, Cho IH. A study on the abutment screw loosening of dental implants. J Korean Acad Prosthodont 1996;34: 1-14.
- Im SM, Kim DG, Park CJ, Cha MS, Cho LR. Biomechanical considerations for the screw of implant prosthesis: A literature review. J Korean Acad Prosthodont 2010;48:61-8. https://doi.org/10.4047/jkap.2010.48.1.61
- Dailey B, Jordan L, Blind O, Tavernier B. Axial displacement of abutments into implants and implant replicas, with the tapered cone-screw internal connection, as a function of tightening torque. Int J Oral Maxillofac Implants 2009;24:251-6.
- Sutter F, Weber HP, Sorensen J, Belser U. The new restorative concept of the ITI dental implant system: design and engineering. Int J Periodont Rest Dent 1993;13:409-31.
- Choi JU, Jeong CM, Jeon YC, Lim JS, Jeong HC, Eom TG. Influence of tungsten carbide/carbon coating on the preload of implant abutment screws. J Korean Acad Prosthodont 2006;44: 229-42.
- Norton MR. An in vitro evaluation of the strength of a 1-piece and 2-piece conical abutment joint in implant design. Clin Oral Implants Res 2000;11:458-64. https://doi.org/10.1034/j.1600-0501.2000.011005458.x
- Mericske-Stern R, Zarb GA. In vivo measurements of some functional aspects with mandibular fixed prostheses supported by implants. Clin Oral Implants Res 1996;7:153-61. https://doi.org/10.1034/j.1600-0501.1996.070209.x
- Richter EJ. In vivo vertical forces on implants. Int J Oral Maxillofac Implants 1995;10:99-108.
- Wataha JC. Biocompatibility of dental casting alloys: a review. J Prosthet Dent 2000;83:223-34. https://doi.org/10.1016/S0022-3913(00)80016-5
- White GE. Osseointegrated dental technology. Carol Stream, IL: Quintessence; 1993. p. 70-83.
- Hulterstrom M, Nilsson U. Cobalt-chromium as a framework material in implant-supported fixed prostheses: a preliminary report. Int J Oral Maxillofac Implants 1991;6:475-80.
- Geis-Gerstorfer J, Weber H, Sauer KH. In vitro substance loss due to galvanic corrosion in Ti implant/Ni-Cr supraconstruction systems. Int J Oral Maxillofac Implants 1989;4:119-23.
- Lee JJ, Song KY, Ahn SK, Park JM. Surface roughness changes caused by the galvanic corrosion between a titanium abutment and base metal alloy. J Korean Acad Prosthodont 2011;49:65-72. https://doi.org/10.4047/jkap.2011.49.1.65
- Oh KT, Kim KN. Electrochemical properties of suprastructures galvanically coupled to a titanium implant. J Biomed Mater Res B Appl Biomater 2004;70:318-31.
Cited by
- Influence of abutment materials on the implant-abutment joint stability in internal conical connection type implant systems vol.6, pp.6, 2014, https://doi.org/10.4047/jap.2014.6.6.491
- 비귀금속 주조 맞춤형 지대주를 이용한 상악 전치부 임플란트 보철수복 증례 vol.31, pp.1, 2015, https://doi.org/10.14368/jdras.2015.31.1.50
- Considerations for Fabrication of CAD-CAM Abutments: Part I. Selection of Titanium Block and Fabrication Process vol.23, pp.1, 2012, https://doi.org/10.32542/implantology.2019005