DOI QR코드

DOI QR Code

Experimental Evaluation for Damping Ratio Limit of Railway Bridge according to Structure Types

철도교량 구조형식별 감쇠비 하한값 산정을 위한 시험적 연구

  • 민낙기 (서울과학기술대학교 철도전문대학원) ;
  • 성덕룡 (대원대학교 철도건설과) ;
  • 박용걸 (서울과학기술대학교 철도전문대학원)
  • Received : 2012.01.06
  • Accepted : 2012.02.27
  • Published : 2012.04.30

Abstract

The damping ratio of railway bridge has become one of the most important issues in dynamic design and dynamic stability of railway bridge. In the present study, laboratory and field test were performed for railway bridges such as a twin I-shaped steel composite girder, PSC box, steel box, PSC, IPC, PRECOM, preflex. The damping ratio of railway bridge according to structure types was estimated by logarithmic decrement method. Therefore, magnitude, frequency and amplitude of load did not affect damping ratio of railway bridge. Also, damping ratio limit of steel composite and PSC bridges was evaluated in 1.0%.

철도교량 동적 설계 및 동적 안전성을 해석적으로 평가하기 위해서는 교량의 감쇠비를 산정하는 것이 매우 중요하다. 본 연구에서는 국내 고속 및 일반철도에서 일반적으로 사용되고 있는 소수주형강합성교, PSC Box, Steel Box, PSC, IPC, Precom, Preflex에 대하여 실내 모형실험 및 운행 중 현장계측을 하였다. 이러한 고속 및 일반철도의 대표적 교량형식에 대한 실내외 시험을 통해 대수감소율을 적용하여 감쇠비를 분석하였다. 따라서 철도교량의 감쇠비는 하중크기, 가진주파수, 진폭에 영향을 받지 않는 것으로 분석되었다. 또한, 기존 철도설계기준에 제시된 감쇠비 하한치와 비교하여 PSC구조 및 강합성구조 철도교량의 경우 감쇠비 하한값을 1.0%로 적용하는 것이 합리적이라 판단되었다.

Keywords

References

  1. S.P. Chang, J.W. Kwark, S.G. Ha, S.I. Kim (1998) A Study on the Dynamic Behavior of Steel Composite Railway Bridges subject to High Speed Train, 98' Spring Conference of the Society for Railway, pp. 548- 555.
  2. D.Y. Sung, Y.G. Park, J.Y. Choi, S.I. Kim (2010) The Experimental Study on the Effect of Track System on the Integral Behavior of Railway Bridge, Journal of the Korean Society for Railway, 13(2), pp. 172-179.
  3. ERRI D214 RP9 (1999) Rail Bridges for Speeds v>200km/h, European Rail Research Institute.
  4. EUROCODE 1 Pt. 2 (2003) Actions on Structures: General Actions-Traffic Loads on Bridges, European Committee for Standardization.
  5. IAPF (2006) Instruccion sobre las acciones a considerer en el proyecto de puentes de ferrocarril(in Spanish), IAPF.
  6. M. Sogabe, N. Matsumoto, M. Kanamori, M. Sato, H. Wakui (2005) Impact Factors of Concrete Girders coping with Train Speed-up, Quarterly Report of RTRI, 46(1), pp. 46-52. https://doi.org/10.2219/rtriqr.46.46
  7. Korea Rail Network Authority (2005) Railway Construction Rule, Korea Railroad Research Institute.
  8. S.I. Kim (2010) Experimental Evaluations of Track Structure Effects on Dynamic Properties of Railway Bridge, Journal of Vibration and Control.
  9. Korea Rail Network Authority (2008) A Study on Dynamic Stability and Dynamic Design Standards for Railway Bridge, Korea Railroad Research Institute.
  10. D.U. Park, N.S. Kim, S.I. Kim (2009) Damping Estimation of Railway Bridges using Extended Kalman Filter, Journal of the Korean Society for Noise and Vibration Engineering, 19(3), pp.294-300. https://doi.org/10.5050/KSNVN.2009.19.3.294

Cited by

  1. Experimental Performance Estimate of a 40m PSC I Girder for Railway Bridges vol.16, pp.5, 2013, https://doi.org/10.7782/JKSR.2013.16.5.394
  2. Investigation of Resonance Occurrence Conditions by Dynamic Interaction Analysis between Arch bridge and KTX Trains vol.20, pp.2, 2016, https://doi.org/10.5000/EESK.2016.20.2.103