Journal of international Conference on Electrical Machines and Systems

  • 제1권3호
  • /
  • Pages.312-319
  • /
  • 2012
  • /
  • 2234-6902(pISSN)
  • /
  • 2234-7577(eISSN)
대한전기학회 분과 (Journal of International Conference on Electrical Machines and Systems)
권호 표지
DOI QR코드

DOI QR Code

Operation Principle and Topology Structures of Axial Flux-Switching Hybrid Excitation Synchronous Machine

  • Liu, Xiping (Dept. of Electrical Engineering and Automation, Jiangxi University of Science and Technology) ;
  • Wang, Chen (Dept. of Electrical Engineering and Automation, Jiangxi University of Science and Technology) ;
  • Zheng, Aihua (Dept. of Electrical Engineering and Automation, Jiangxi University of Science and Technology)
  • 투고 : 2012.03.10
  • 심사 : 2012.07.26
  • 발행 : 2012.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The operation principle of an axial flux-switching hybrid excitation synchronous machine (AFHESM) is analyzed and its topology structures are proposed in this paper. After some comprehensive analysis of the operation principle to axial flux electrical machine, flux-switching electrical machine and hybrid excitation electrical machine, the operation principle of AFHESM is given. Combined with some typical topological structures of hybrid excitation electrical machine, some possible topological structures are proposed and some comprehensive comparisons are carried out. The analysis results show that the stator-separated AFHESM has some advantages such as less AM turns, less impact on the demagnetization of PM, less magnetic flux-leakage and higher efficiency compared to other topologies.

키워드

참고문헌

  1. Y. Chen and Z. Q. Zhu, "Three-Dimensional lumpedparameter magnetic circuit analysis of single-phase flux- Switching permanent-magnet motor",IEEE Transactions on Industry Applications, vol. 44, no.6,pp. 1701-1710, Nov/Dec. 2008. https://doi.org/10.1109/TIA.2008.2006352
  2. Y. Cheng, C. Pollock and H. A. Pollock, "Permanent magnet flux switching motor for low energy axial fans,"40th IAS Annual Meeting, Oct. 2-6, 2005, pp. 2168-2175.
  3. J. A. Tapia, F. Leonardi and T. A. Lipo, "Consequent pole permanent magnet machine with extended field weakening capability," IEEE Trans on Industry Applications, Vol. 39, No. 6, 2003,1704-1709. https://doi.org/10.1109/TIA.2003.818993
  4. Wang Qunjing, Li guoli and Ma Fei, "Electromagnetic analysis at no load and inductance calculation of the hybrid claw PM generator," Transactions of China Electrotechnical Society, 2002, 17(5): 1-5.
  5. M. Kotaro, F. Tadashi and N. Nobuyuki, "Performance prediction of a Hybrid-excitation synchronous machine with axially arranged excitation poles and Permanent-magnet poles," Electrical Engineering in Japan, Vol. 150, No. 2, 2003, 43-49.
  6. Yan Yangguang and Chen zhihui, "Hybrid excitation synchronous motor," China, 200310106347[P]. 2004.11.10
  7. Z. R. Zhang, Y. G. Yan, S. S. Yang and B. Zhou, "Principle of operation and feature investigation of a new topology of hybrid excitation synchronous machine," IEEE Trans on Magnetics, Vol. 44, No. 9, 2008: 2174-2180. https://doi.org/10.1109/TMAG.2008.2000513
  8. A. Parviainen, M. Niemela, J. Pyrhonen and L. J. Mantere, "Performance comparison between low-speed Axial-flux and Radial-flux permanent magnet machines including mechanical constraints," IEEE International Electric Machines & Drives Conference May. 15-18, 2005, pp. 1695-1702.
  9. R. Qu, M. Aydin and T. A. Lipo, "Performance comparison of Dual-rotor Radial-flux and Axial-flux permanent-magnet BLDC machines," IEEE International Electric Machines & Drives Conference, Jun. 1-4, 2003, pp. 1948-1954.
  10. Y. P. Yang and D. S. Chuang, "Optimal design and control of a wheel motor for electric passenger cars," IEEE Transactions on Magnetics, vol. 43, no. 1, pp. 51-61, Jan. 2007. https://doi.org/10.1109/TMAG.2006.886153
  11. Y. Chen, P. Pillay and A. Khan, "PM wind generator comparison of different topologies," 39th IAS Annual Meeti, Oct. 3-7, 2004, pp. 1405-1412.
  12. E. Spooner and A. Williamson. Modular, "Permanent-magnet wind turbine generators," 31th IAS Annual Meeting, Oct. 6-10, 1996, pp. 497-502.
  13. S. Brisset, D. Vizireanu and P. Brochet, "Design and optimization of a Nine-phase Axial-flux PM synchronous generator with concentrated winding for Direct-drive wind turbine," IEEE Transactions on Industry Applications, vol. 44, no. 3, pp. 707-715, May/Jun. 2008. https://doi.org/10.1109/TIA.2008.921379
  14. A. Parviainen, J. Pyrhönen and P. Kontkanen, "Axial flux permanent magnet generator with concentrated winding for small wind power applications," IEEE International Electric Machines & Drives Conference May, 15-18, 2005, pp. 1187-1191.
  15. T. F. Chan and L. L. Lai, "An Axial-flux permanent-magnet synchronous generator for a Direct-coupled Wind-turbine system," IEEE Transactions on Energy Conversion, vol. 22, no. 1, pp. 86-94, Mar. 2007. https://doi.org/10.1109/TEC.2006.889546
  16. M. Andriollo, M. D. Bortoli, G. Martinelli, A. Morini and A. Tort, "Permanent magnet axial flux disc generator for small wind turbines," IEEE International Conference on Electrical Machines, Sep, 6-9, 2008, pp. 1045-1050.
  17. F. Carrichi, F.Crescimbini and F. Mezzetti, "Multistage axial-flux PM machine for wheel direct drive," IEEE Transactions on Industry Applications, vol. 32, no. 4, pp. 882-887, Jul/Aug. 1996. https://doi.org/10.1109/28.511645
  18. S. Javadi and M. Mirsalim, "A coreless Axial-flux Permanent-magnet generator for automotive applications," IEEE Transactions on Magnetics, vol. 44, no. 12, pp. 4591-4598, Dec. 2008. https://doi.org/10.1109/TMAG.2008.2004333
  19. R. Ficheux and F. Caricchi, "Axial-flux Permanent-magnet motor for direct-drive elevator systems without machine room," IEEE Transactions on Industry Applications, vol. 37, no. 6, pp. 1693-1701, Nov/Dec. 2001. https://doi.org/10.1109/28.968180
  20. F. Caricchi, F. Crescimbini and O. Honprati, "Modular axial flux permanent motor for ship propulsion drives," IEEE Transactions on Energy Conversion, vol. 14, no. 3, pp. 673-679, Sep. 1999. https://doi.org/10.1109/60.790934
  21. Wang Xiaoyuan, Tang Renyuan, Du Jingjuan, Zhao Fang and Qi Lixiao, "The optimal design of disc coreless PM synchronous motor based on the Halbach Array -Wedge Air-gap structure motor," Transactions of China Electrotechnical Society, 2007, 22(3):1-5.
  22. Lin Mingyao, Zhang Lei and Li Xin, "Cogging torque analysis of axial magnetic flux switching permanent magnet motor," Electric Machines and Control, 2009, 13(5): 787-791.
  23. Huang Surong, "The design technology of modern disc wheel motor," Electrical Machinery Technology, 2005, (3):3-7.
  24. Lu Qinfen, Fan chengzhi and Yeyunyue, "The magnetic field and force characteristics of new pumping unit," Journal of zhejiang university (engineering version),2008, 42(4):651-655.
  25. Huang Keyuan, Ou Jinsheng, Huang shoudao and Gao Jian, "The electromagnetic analysis of disc PM synchronous generator," Journal of hunan university (science version), 2008, 35(3):41-45.