Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

A Numerical Analysis Study on Plate Heat Exchanger Heat Transfer Characteristic by Corrugation Angle and Pitch

주름 각도와 피치에 따른 판형 열교환기 전열특성에 관한 수치해석 연구

  • Published : 2012.06.30
⟨ Previous Next ⟩

Abstract

For numerical analysis of the plate heat exchanger, a lot of time are required in modeling work and calculation. Whereas, this paper was purposed to identify characteristic of the plate heat exchanger through simplification of modeling by interpreting the numerical analysis proximity with the actual model. This study was also examined temperature difference between inlet side and outlet side, inner pressure drop, heat transfer area of plate and change of heat transfer coefficient on the plate depending on the inner corrugation angle and corrugation pitch of a herring bon pattern of the plate heat exchanger among chevron types of the plate exchanger.

Keywords

References

  1. Lee, S. Y., Ahn, J. and Shin, S. W., "A Numerical Study on Plate Heat Exchanger Performance by Gap between Chevron Plates", Korean Society of Computational Fluids Engineering, Korean Society of Computational Fluids Engineering, pp. 347-354, 2009.
  2. Ahn, H. J., Lee, S. H., Her, N. K., Park, H. J. and Ryu, H. S., "A Numerical Simulation of Flow and Heat Transfer in a Dimple-Type Plate Heat Exchanger", Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 22, No. 3, pp. 149-155, 2010.
  3. Bae, K. J., An, S. K., Cho, H. U., Nam, S. C. and Cho, H. H., "Comparison of Performance Characteristics in the Chevron Type Plate Heat Exchanger with Performance Correlation", Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 23, No. 8, pp. 535-542, 2011.
  4. Ma Z. W., Zhang P., "Pressure Drop and Heat Transfer Characteristics of Clathrate Hydrate Slurry in a Plate Heat Exchanger", International Edu Froid Vol. 34 No. 3, pp. 796-806. 2011.
  5. Jeon, J. D., Jeon, E. C., Jeung, H. G. and Lee, C. W., "A Study on Numerical Analysis fpr Heat Transfer and Flow Characteristics in a Ribbled Tube", Jounal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 6, pp. 134-139, 2011.
  6. Jeong, J. Y., Nam, S. C. and Kang, Y. T., "A Numerical Analysis on the Heat Transfer and Pressure Drop Characteristics of Welding Type Plate Heat Exchangers", Trans. of the KSME(B) Engineering, Vol. 32, No. 9, pp. 676-682, 2008.