Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

Selection of the Optimal Machining Condition for a High-hardness Resin using the 5-axis Machine

5축 가공기를 이용한 고경도 수지의 최적가공조건 선정

  • Published : 2012.10.31
⟨ Previous Next ⟩

Abstract

This study describes the selection of optimum machining conditions for a high-hardness resin by using a large 5-axis machine. The experiments were conducted to examine the main factors that affect the surface roughness, such as the spindle speed, axial and radial depths of the cut, and pattern of the cutter path. To analyze the experiment results, the factor with the biggest impact on machining was determined using the smaller-the-better characteristic of the Taguchi method; the effectiveness of the experiment was then confirmed by verifying the selected optimum machining condition.

Keywords

References

  1. Hwang, J. D. and Lim, E. S., "The control technology of cutter path and cutter posture for 5-axis control machining", KSMPE, Vol. 10, No. 2, pp. 1-8, 2011.
  2. Kang, I. S. and Kim, J. S., "The characteristics of cutting force and surface roughness according to tool tilting angle in 5-axis high speed machining of molds", Transactions of KSMTE, Vol. 16, No. 5, pp. 63-69, 2007.
  3. Park, J. M, Choi, W. S, K, S. H. and Cha, J. H., "Optimal cutting conditions of surface roughness for inconel 718 alloy in turning operation", KSMPE, Vol. 8, No. 4, pp. 48-53, 2009.
  4. Kim, S. O. and Kwak, J. S., "Study on performance improvement in magnetic abrasive polishing assisted by silicone gel medium", Conf. of the KSME, pp. 1499-1505, 2010.
  5. Kim, S. S. and Lee, Y. C., "Ultra-precision grinding optimization of mold core for aspheric glass lenses using DOE and compensation machining", KSPE, Vol. 24, No. 6, pp. 45-50, 2007.
  6. Kim, S. S. and Lee, Y. C., "Ultra-precision grinding optimization of mold core for aspheric glass lenses using DOE and compensation machining", KSPE, Vol. 24, No. 6, pp. 45-50, 2007.