Abstract
The study of surface ground reinforcing method is supposed to be considered preferentially is not satisfied and also doesn't contemplate plastic flow because of repetitive drive of construction equipment. Also, Terzaghi's bearing-capacity equation and Yamanouchi's suggestion have been used to design the surface reinforcement, but most engineers depend on their experience and cases constructed before because of dispersed variables and inappropriate bearing-capacity factors. Hence, plate load test and repetitive plate load test were performed in the field which is reinforced with geotextile, Geogrid whose tensile strength are 200kN/m, 100kN/m and bamboo($0.4m{\times}0.4m$). The object of this study is to evaluate bearing capacity and behaviour of surface ground and to compare each reinforcement form test results. From the results bearing capacity ratio increased by a maximum of 1.5 times with bamboo reinforcement method comparing to others.
초연약 지반의 개량을 위한 중장비의 안전한 주행성 확보를 위해 제일 우선적으로 검토되어야 하는 표층처리공법에 대한 연구는 아직 미진하며 표층처리공법 설계 시 건설기계의 반복적인 주행으로 인한 소성침하를 고려하지 못하고 있다. 따라서 본 연구에서는 표층처리공법에서 가장 많이 사용하고 있는 보강재인 지오텍스타일, 인장강도가 200kN/m와 100kN/m인 지오그리드와 대나무망으로 보강한 후 1.0m의 모래로 복토한 지반에서 현장 평판재하시험과 반복 평판재하시험을 실시하여 각 보강재별 지지력과 거동양상을 비교 평가하고자 한다. 평판재하시험 결과 대나무망을 사용하였을 경우 다른 보강재를 사용하였을 때보다 BCR값이 최대 1.5배 증가하였다.