한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제21권2호
  • /
  • Pages.196-201
  • /
  • 2012
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

125cc급 모터사이클용 머플러 내부 유동특성에 관한 연구

A Study on Flow Characteristics in Muffler for 125cc Grade Motorcycle

  • 투고 : 2011.10.17
  • 심사 : 2011.11.23
  • 발행 : 2012.04.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study represents numerical study on the thermal and fluid flow characteristics of exhaust gas in a motorcycle muffler. The engine generates 125cc of displacement. Numerical analysis with computational fluid dynamics(CFD) was carried out to investigate the exhaust gas that flow into a motorcycle muffler. The STAR-CD S/W used to analyze three dimensional steady state and transient in a muffler. The Navier-Stokes Equation is solved with SAMPLE and PISO method in cartesian coordinates system. As the numerical result, it could be confirmed pulsating pressure generated from inlet of muffler become closer to the atmospheric pressure through baffle. Also the numerical result was almost identical to experimental result and, through the comparison, the reliability of numerical result was confirmed.

키워드

참고문헌

  1. Hartsock, D. L., Stiles, E. D., Bable, W. C., and Kranig, J. V., 1994, "Analytical and Experimental Evaluation of a Thermally Insulated Automotive Exhaust System," SAE paper No. 940312.
  2. Choi, S. C., Lee, H. J., Kim, S. H., Chung, H. S., Lee, K. Y., and Jeong, H. M., 2003, "Pressure Variations in Exhaust Pipe of a Single Cylinder Motorcycle Engine," Proceedings of the KSAE Fall Annual Meeting, pp. 659-664.
  3. Dokumaci, E. , 2001, "Sound Transmission in Mufflers with Multiple Perforated CO-Axial Pipe," Journal of Sound and Vibration, Vol. 247, No. 3, pp. 379-387. https://doi.org/10.1006/jsvi.2000.3381
  4. Denia, F. D., Albelda, J., and Fuenmayor, F. J., 2001, "Acoustic Behaviour of Elliptical Chamber Mufflers," Journal of Sound and Vibration, Vol. 241, No. 3, pp. 401-421. https://doi.org/10.1006/jsvi.2000.3289
  5. Kim, M. H., Chung, W, I., and Chyun, I. B., 1999, "A Study on the Flow Characteristics of Steady State and Pressure Variation inside the Muffler with the Inflow of Pulsating Exhaust Gas," Journal of KSAE, Vol. 7, No. 8, pp. 150-159.
  6. Kim, M. H., Chung, W. I., and Chyun, I. B., 2000, "A Study on the Flow Characteristics and Pressure Loss of a Muffler for the Variation of Volumetric Rate and Offset," Journal of KSAE, Vol. 8, No. 4, pp. 93-99.
  7. Kim, J. Y., Kwac, L. K., An, J. S., Yang, D. J., Song, K. S., and Yang, D. J., 2004, "The Flow Analysis for Vibration and Noise Diagnostic of Vacuum Cleaner Fan Motor," Journal of the KSMTE, Vol. 13, No. 4, pp. 56-63.
  8. Kim, J. Y., and Choi, J. H., 2009, "A Study on Optimal Design of Polymer Extruder Dies by CFD," Journal of the KSMTE, Vol. 18, No. 6, pp. 585-589.