Journal of Electrical Engineering and Technology

  • 제7권5호
  • /
  • Pages.745-752
  • /
  • 2012
  • /
  • 1975-0102(pISSN)
  • /
  • 2093-7423(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

Optimum Design of Transverse Flux Machine for High Contribution of Permanent Magnet to Torque Using Response Surface Methodology

  • Xie, Jia (Dept. of Electromechanical Engineering, Xi'an Jiaotong University) ;
  • Kang, Do-Hyun (Dept. of Electric Motor Research Center, Korea Electrotechnology Research Institute) ;
  • Woo, Byung-Chul (Dept. of Electric Motor Research Center, Korea Electrotechnology Research Institute) ;
  • Lee, Ji-Young (Dept. of Electric Motor Research Center, Korea Electrotechnology Research Institute) ;
  • Sha, Zheng-Hui (School of Mechanical and Materials Engineering, Washington State University) ;
  • Zhao, Sheng-Dun (Dept. of Electromechanical Engineering, Xi'an Jiaotong University)
  • 투고 : 2011.09.14
  • 심사 : 2012.05.04
  • 발행 : 2012.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Transverse flux machine (TFM) has been proved to be very suitable for high-torque, low-speed, and direct-drive situation in industry. But the complex structures and costly permanent magnets (PMs) are two key limitations of its wide range of applications. This paper proposes a new claw pole TFM (ACPTFM) which features an assembled claw pole stator and using the lamination steels material to overcome the complex structures. By combining response surface methodology (RSM) with design of experiment, an optimum design method is put forward to improve the PM's contribution to the torque in order to save the PM's amount. The optimum design results demonstrate the validity of the proposed optimum design method and the optimized model. Eventually, the finite-element analysis (FEA) calculation method, which is used in the optimization process, is verified by the experiments in a prototype.

키워드

참고문헌

  1. A.Y. Chen, R. Nilssen and A. Nysveen, "Performance comparisons among radial-flux, multistage axial-flux, and three-phase transverse-flux PM machines for downhole applications," IEEE Trans. Ind. Appl., vol.46, no.2, pp.779-789, Mar./Apr. 2010. https://doi.org/10.1109/TIA.2009.2039914
  2. J.B. Zou, Q. Wang and Y.X. Xu, "Influence of the permanent magnet magnetization length on the performance of a tubular transverse flux permanent magnet linear machine used for electromagnetic launch," IEEE Trans. Plasma Science, vol.39, no.1, pp.241-246, Jan. 2011. https://doi.org/10.1109/TPS.2010.2045661
  3. D.H. Kang, Y.H. Chun and H. Weh, "Analysis and optimal design of transverse flux linear motor with PM excitation for railway traction," in Proceedings of IEE Electr. Power Appl., London, UK, pp.493-499, Jul. 2003.
  4. A. Masmoudi and A. Elantably, "An approach to sizing high power density TFPM intended for hybrid bus electric propulsion," Electr. Power Components and Systems, vol.28, no.4, pp.341-354, Apr. 2000.
  5. A. Babazadeh, N. Parspour and A Hanifi, "Transverse flux machine for direct drive robots: modeling and analysis," in Proceedings of IEEE Conference on Robotics, Automation and Mechatronics, Singapore, pp. 376-380, Dec. 2004.
  6. H. Polinder, B.C. Mecrow, A.G. Jack, P.G. Dickinson and M.A. Mueller, "Conventional and TFPM linear generators for direct-drive wave energy conversion," IEEE Tran. Energy Conversion, vol.20, no.2, pp.260-267, Jun. 2005. https://doi.org/10.1109/TEC.2005.845522
  7. D.J. Bang, H. Polinder, G. Shrestha and J.A. Ferreira, "Design of a lightweight transverse flux permanent magnet machine for direct-drive wind turbines," in Proceedings of IEEE Ind. Appl. Society Annual Meeting, Edmonton, Alberta, Canada, pp.1-7, Oct. 2008.
  8. M. Zhao, J.M. Zou, Y.X. Xu, J.B. Zou and Q. Wang, "The thrust characteristic investigation of transverse flux tubular linear machine for electromagnetic launcher," IEEE Trans. Plasma Science, vol.39, no.3, pp.925-930, Mar. 2011. https://doi.org/10.1109/TPS.2010.2103330
  9. D.C. Montgomery, Design and Analysis of Experiments: 7th ed., New York: Wiley, 2008.
  10. A.I. Khuri and J.A. Cornell, Response Surfaces: Designs and Analyses: New York: Marcel Dekker, 1996.
  11. C. Yuan, B.G. Liu and C.G. Chen, "Optimization of preparation process of hydroxypropyl-${\beta}$-cyclodextrin by response surface methodology," in Proceedings of International Conference on Challenges in Environmental Science and Computer Engineering, Wuhan, China, pp.26-28, Mar. 2010
  12. S.I. Kim, J.P. Hong, Y.K. Kim, H. Nam and H.I. Cho, "Optimal design of slotless-type PMLSM considering multiple responses by response surface methodology," IEEE Trans. Magn., vol.42, no.4, pp.1219-1222, Apr. 2006. https://doi.org/10.1109/TMAG.2006.871950
  13. D.K. Hong, B.C. Woo and D.H. Kang, "Application of fractional factorial design for improving performance of 60 W transverse flux linear motor," J. Appl. Phys., vol.103, no.7, pp. 07F120:1-07F120:3, Mar. 2008.
  14. A. Masmoudi, A. Njeh and A. Elantably, "On the analysis and reduction of the cogging torque of a claw pole transverse flux permanent magnet machine," Euro. Trans. Electr. Power, vol.15, no.6, pp.513-526, Nov. /Dec. 2005. https://doi.org/10.1002/etep.100
  15. B.C. Mecrow, A.G. Jack and C.P. Maddison, "Permanent magnet machines for high torque, low speed applications," in Proceedings of International Conference on Electrical Machines, Vigo, Spain, pp.461-466, Sep. 1996.

피인용 문헌

  1. Design and Comparison of Multistage Axial Flux Permanent Magnet Machines for Potable Generating Application vol.20, pp.4, 2015, https://doi.org/10.4283/JMAG.2015.20.4.413
  2. Optimal Design of Permanent Magnetic Actuator for Permanent Magnet Reduction and Dynamic Characteristic Improvement using Response Surface Methodology vol.10, pp.3, 2015, https://doi.org/10.5370/JEET.2015.10.3.935
  3. Position Servo Control of the Transverse Flux Machine Based on an Armature Current RMS and Initial Phase Control Method vol.756-759, pp.1662-8985, 2013, https://doi.org/10.4028/www.scientific.net/AMR.756-759.284