전기학회논문지 (The Transactions of The Korean Institute of Electrical Engineers)

  • 제61권9호
  • /
  • Pages.1269-1274
  • /
  • 2012
  • /
  • 1975-8359(pISSN)
  • /
  • 2287-4364(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

철심 재질에 따른 철손 계수 산정 및 IPMSM의 철손 계산

Estimation Iron Loss Coefficients and Iron Loss Calculation of IPMSM According to Core Material

  • 투고 : 2012.06.07
  • 심사 : 2012.08.16
  • 발행 : 2012.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, the iron loss was calculated using estimated iron loss coefficient at 650W Interior Permanent Magnet Synchronous Motor(IPMSM) and 250W IPMSM. The iron loss coefficients was estimated different according to electrical steel material used to stator and rotor core in motor. Aspect of The rotating flux field and alternating flux field was confirmed by magnetic field behavior and harmonic analysis in stator core, the iron loss was calculated using flux density by Finite Element Method(FEM) and estimated coefficients by iron loss coefficient estimation proposed in this paper. The iron loss experiment was performed for verified to iron loss calculation, and the iron loss coefficients were verified by comparison of iron loss calculation value and experimental value.

키워드

참고문헌

  1. Gyu-Hong Kang, Jung-Pyo Hong, Gyu-Tak Kim, and Jung-Woo Park, "Improved Paramater Modeling of Interior Permanent Magnet Synchronous Motor Based on Finite Element Analysis" IEEE Trans. on Magnetics, vol. 36, no. 4, pp.1867-1870, 2000. https://doi.org/10.1109/20.877809
  2. 임우경, 서장호, 정현교 "구동조건을 고려한 매입형 영구자석 동기 전동기의 철손 분석" 대한전기학회 2009년 전기기기 및 에너지변환시스템부문회 춘계학술대회 논문집, pp. 73-75, 2009.4
  3. D. M. Ionel, M. Popescu, S. J. Dellinger, T. J. E. Miller, R. J. Heideman, and M. I. McGilp, "On the variation with flux and frequency of the coreloss coefficients in electrical machines," IEEE Trans. Ind. Apply, vol. 42, no. 3, pp. 658-668, May/Jun. 2006. https://doi.org/10.1109/TIA.2006.872941
  4. 하경호, 차상윤, 김재관, 홍정표 "영구자석형 모터의 고정자 철심에서 자계의 거동 및 철손 분석" 대한전기학회 논문지 B, 제55B권 제2호 pp. 76-82. 2006. 2
  5. 장석명, 조한욱, 고경진, "고속으로 운전되는 영구자석형 동기전동기의 철손 및 풍손 해석." 대한전기학회, 전기학회논문지 B, 제55B권 제10호 2006.10, page(s): 511-520
  6. Y.Chen, P.Pillay, "An Improved formula for lamination core loss calculations in machines operating with high frequency and high flux density excitation" Industry Application Conference. Vol. 2 pp. 13-18, 2002
  7. Sadowski N, Lajoie-Mazenc M, Bastos J.P.A, Ferreira da Luz M.V, Kuo-Peng P "Evaluation and analysis of iron losses in electrical machines using the rain-flow method", Magnetics, IEEE Transactions on, Vol.36, No.4, pp. 1923-1926, 2000 https://doi.org/10.1109/20.877823

피인용 문헌

  1. The Iron loss Estimation of IPMSM According to Current Phase Angle vol.8, pp.6, 2013, https://doi.org/10.5370/JEET.2013.8.6.1345
  2. The Maximum Efficiency Driving in IPMSM by Precise Estimation of Current Phase Angle vol.8, pp.5, 2013, https://doi.org/10.5370/JEET.2013.8.5.1221