한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제21권3호
  • /
  • Pages.362-367
  • /
  • 2012
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

바이오용 압전디스크방식 마이크로 펌프 설계 및 제작 (II) -임베드방식의 압전모듈의 최적설계 및 제작-

Design and Fabrication of PZT Disc Actuated Micro Pump for Bio-Applications (II): Optimal Design & Fabrication of Embedding-type PZT Module

  • 김형진 (강원대학교 기계메카트로닉스공학과 대학원) ;
  • 장인배 (강원대학교 기계메카트로닉스공학과) ;
  • 서영호 (강원대학교 기계메카트로닉스공학과) ;
  • 김병희 (강원대학교 기계메카트로닉스공학과)
  • 투고 : 2011.07.13
  • 심사 : 2011.12.27
  • 발행 : 2012.06.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Though a micro pump is a crucial element in miniaturized bio-fluidic systems or drug delivery systems, most of the conventional micro pumps still have some limitations to miniaturize their controller system and to obtain the sufficient back pressure which can rise over the inner pressure of human body or experimental animals. In this paper, to overcome these limitation, a new PZT disc and its controller were designed and fabricated to get the sufficient flowrate and the back pressure with guaranteeing embeddability of the controller into pumping body. The amplitudes of the disc deflections were as large as 40 ${\mu}m$ at 200 V - 100 Hz condition. As results of experiments, the flow rate and the back pressure increase when the frequency increases. The obtainable maximum flow rate and back pressure are 5.2 ml/min at 95 Hz and 13.14 kPa at 90 Hz respectively.

키워드

참고문헌

  1. Kim, H. J., Seo, Y. H., and Kim, B. H., 2011, "Design and Fabrication of PZT Disc Actuated Micro Pump for Bio-applications (I): Optimal Design of Ring-shaped Flab Valve Module," J. of KSMTE, Submitted.
  2. Smits, J. G., 1990, "Piezoelectric Micropump with Three Valves Working Peristaltically," Sensors and Actuators A, Vol. 21-23, No. 1-3, pp. 203-206.
  3. Lee, C. W., Song, J. Y., and Ha, T. H., 2007, "Control Platform Design of Micro Factory for Micro Pump," KSMTE spring conference, pp. 273-276.
  4. Yang, X., Zhou, Z., Cho, H., and Luo, X., 2006, "Study on a PZT-actuated Diaphragm Pump for Air Supply for Micro Fuel Cells," Sensors and Actuators A, Vol. 130-131, pp. 531-536. https://doi.org/10.1016/j.sna.2005.12.021
  5. Kan, J., Yang, Z., Peng, T., Cheng, G., and Wu, B., 2005, "Design and Test of a High-performance Piezoelectric Micropump for Drug Delivery," Sensors and Actuators A, Vol. 121, No. 1, pp. 156-161. https://doi.org/10.1016/j.sna.2004.12.002
  6. Liua, G., Shen, C., Yang, Z., Cai, X., and Zhang, H., 2010, "A Disposable Piezoelectric Micropump with High Performance for Closed-loop Insulin Therapy System," Sensors and Actuators A, Vol. 163, No. 1, pp. 291-296. https://doi.org/10.1016/j.sna.2010.06.030
  7. Cooney, C. G., and Towe, B. C., 2004, "A Thermopneumatic Dispensing Micropump," Sensors and Actuators A, Vol. 116, No. 3, pp. 519-524. https://doi.org/10.1016/j.sna.2004.05.015
  8. Jun, D. H., Sim, W. Y., and Yang, S. S., 2007, "A Novel Constant Delivery Thermopneumatic Micropump using Surface Tensions," Sensors and Actuators A, Vol. 139, No. 1-2, pp. 210-215. https://doi.org/10.1016/j.sna.2007.04.038
  9. Van de Pol, F. C. M., Van Lintel, H. T. G., Elwenspoek, M., and Fluitman, J. H. J., 1990, "A Thermopneumatic Micropump based on Micro-engineering Techniques," Sensors and Actuators A, Vol. 21, No. 1-3, pp. 198-202. https://doi.org/10.1016/0924-4247(90)85038-6
  10. Luo, A., and Xia, A., 2005, "A Novel Valve-less Synthetic-jet-based Micro-pump," Sensors and Actuators A, Vol. 122, No. 1, pp. 131-140. https://doi.org/10.1016/j.sna.2005.03.062
  11. Bourouina, T., Bosseboeuf, A., and Grandchamp, J. P., 1997, "Design and Simulation of an Electrostatic Micropump for Drug-delivery Applications," J. Micromech. Microeng., Vol. 7, No. 3, pp. 186-188. https://doi.org/10.1088/0960-1317/7/3/028
  12. Teymoori, M. M., and Abbaspour-Sani, E., 2005, "Design and Simulation of a Novel Electrostatic Peristaltic Micromachined Pump for Drug Delivery Applications," Sensors and Actuators A, Vol. 117, No. 2, pp. 222-229. https://doi.org/10.1016/j.sna.2004.06.025
  13. Woias, P., 2005, "Micropumps-past, Progress and Future Prospects," Sensors and Actuators B, Vol.105, No. 1, pp. 28-38. https://doi.org/10.1016/S0925-4005(04)00108-X
  14. Havli'k, R., Kerkhoffs, W., Jiao, L. R., Schumacher, O., Reul, H., and Habib, N., 2001, "Intravascular Micropump for Augmented Liver Perfusion : First In Vivo Experience," Artificial Organs, Vol. 25, No. 5, pp. 392-394. https://doi.org/10.1046/j.1525-1594.2001.06772.x
  15. Oshio, K., Watanabe, H., Song, Y., Verkman, A. S., and Manley, G. T., 2005, "Reduced Cerebrospinal Fluid Production and Intracranial Pressure in Mice Lacking Choroid Plexus Water Channel Aquaporin-1," FASEB J, Vol. 19, pp. 76-78.
  16. Supertex Inc, n.d., viewed at 4 May 2009, .