한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제21권3호
  • /
  • Pages.394-400
  • /
  • 2012
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

브러시 디버링 연삭 시스템 공정 최적화에 대한 연구

A Study on the Process Optimization of Brush Deburring Grinding System

  • 신관수 (인천대학교 기계시스템공학부)
  • 투고 : 2012.04.23
  • 심사 : 2012.05.31
  • 발행 : 2012.06.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Due to the increasing demand for carious methodologies, the quality improvement of products were introduced. A brush, the most frequently used type of grinding process, is one of the deburring. In order to produce consistent burr shape, various machining conditions have been combined and applied to disk grinding process. By tool dynamometer, acoustic emission sensor and acceleration sensor depend on changes in processing conditions(depth of engagement, cutting speed, workpiece position, workpiece orientation, cutting time) signals were obtained for brush deburring grinding system. Root mean square obtained by processing the signal processing conditions by analyzing the characteristics of deburring is to derive the optimum conditions.

키워드

참고문헌

  1. Lee, Y. C., Kim, G. N., and Kwak, T. S., 2010, "Investigation for Mirror-surface Machining Properties of Mold Core of Glass Molding Press by Parallel Grinding and Magnetic Assistance Polishing," Journal of the KSPE, Vol. 27, No. 12, pp. 22-27.
  2. Kim, G. D., Loh, B. G., and Kim, J. S., 2006, "Development of Ultra-precision Ultrasonic Surface Machining Device Using Cyclic Elliptical Cutting Motion of a Couple of Piezoelectric Material," Journal of the KSPE, Vol. 5, No. 3, pp. 29-35.
  3. Yoon, J. H., Lee, J. W., Jung, K. Y., and Jung, M. S., 1998, "Cutting Condition for Improving Cutting Efficiency and Accuracy by Ball Endmill on a Machining Center," Journal of the KSMTE, Vol. 7, No. 3, pp. 99-103.
  4. Yoo, S. M., 2009, "A Study on the Flexible Disk Deburring Process Arc Zone Parameter Prediction Using Neural Network," Journal of the KSMTE, Vol. 18, No. 6, pp. 681-689.
  5. Park, D. S., Han, J. Y., Seong, E. J., and Han, I. Y., 2006, "Deburring of the Inner Edge in Intersection Hole by Powder Blasting," Proceedings of the KSMPE Spring Conference, pp. 44-49
  6. Yoon, J. H., Ahn, B. W., and Park, S. J., 2004, "A Deburring Characteristics of Small Punching Holes using Micro Press," Journal of the KSPSE, Vol. 13, No. 3, pp. 61-67.
  7. Won, J. Y., Choi, Y. J., Lee, S. Y., and Choi, H. J., 2003, "Deburring Technology using Ultrasonic Cavitation," Proceedings of the KSME Fall Conference, pp. 1798- 1803.
  8. Bae, J. Y., Joo, Y. M., Kim, J. U., and Lee, S. R., 2002, "A Development of Deburring System using Vision Sensor," Proceedings of the KSME Spring Conference, pp. 900-904.
  9. Choi, G. J., Kim, Y. W., Shin, S. W., and Ahn, D. S., 1998, "Deburring of Irregular Burr using Vision and Force Sensors," Journal of the KSPSE, Vol. 2, No. 3, pp. 83-88.
  10. Shin, S. W., Gal, C. S., and Ahn, D. S., 1996, "A Study on the Automation of Deburring Process Using Expert's Skills," Proceedings of the KSPE Fall Conference, pp. 685-688.
  11. Park, K. T., and Choi, J. W., 1994, "Intelligent Robot System for Deburring," Proceedings of the KSPE spring Conference, pp. 371-376.
  12. Shin, K. S., 2010, "A study on the Character of Brush Deburring Grinding System," Journal of the KSMTE, Vol. 19, No. 3, pp. 414-418.
  13. Shin, K. S., 2001, A study on the Analysis and Optimization of Brush Grinding Process, A Thesis for a Doctorate, Kyunghee University, Republic of Korea.
  14. Mathai, G., and Melkote, S., 2012, "Effect of Process Parameters on the Rate of Abrasive Assisted Brush Deburring of Microgrooves," International Journal of Machine Tools and Manufacture, Vol. 57, pp. 46-54. https://doi.org/10.1016/j.ijmachtools.2012.02.007

피인용 문헌

  1. Statistical Analysis of Industrial Grinding Brush Force Characteristics Based on Finite Element Approach vol.2018, pp.1563-5147, 2018, https://doi.org/10.1155/2018/7362705
  2. An Experimental Study on the Deburring Characteristics according to rpm Change of Deburring Wheel vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.103