Journal of the Korean Society of Propulsion Engineers (한국추진공학회지)

The Korean Society of Propulsion Engineers (한국추진공학회)
권호 표지
DOI QR코드

DOI QR Code

Failure Behavior of Pin-jointed Cylindrical Composites Using Acoustic Emission Technique

AE기법을 이용한 원통형 복합재의 핀 체결부 파괴거동

  • 윤성호 (금오공과대학교 기계공학과) ;
  • 황영은 (금오공과대학교 대학원 기계공학과) ;
  • 김찬규 (금오공과대학교 대학원 기계공학과)
  • Received : 2012.06.11
  • Accepted : 2012.07.20
  • Published : 2012.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the bearing strengths and fracture behaviors of the pin-jointed carbon fiber/epoxy composites were investigated through pin loading test with acoustic emission technique. The composites were fabricated by a filament winding process, and three types of laminated patterns were considered. Type 1 was fabricated with stitch, Type 2 was fabricated without stitich and Type 3 was fabricated with prepregs. According to the results, bearing strength of Type 1 was 3.3% lower than that of Type 2 and that of Type 3 was highest. Type 1 and Type 2 revealed a net-tension failure mode, respectively, whereas Type 3 pattern exhibited a bearing failure mode. Also, acoustic emission energy of the Type 3 was higher than that of the Type 1 and Type 2. Therefore, the Type 3 was found to be structurally safer than the Type 1 and Type 2.

본 연구에서는 핀 하중 시험을 통해 탄소섬유/에폭시 복합재의 핀 체결부에 대한 베어링 강도를 조사하고 음향방출법을 적용하여 파괴거동을 조사하였다. 복합재는 필라멘트 와인딩 공법을 적용하여 제작되었으며 적층패턴을 달리한 세 종류의 시편을 적용하였다. Type 1은 스티치가 있는 일방향 섬유시트가 적용된 적층패턴을 가지고 있고, Type 2는 스티치가 제거된 일방향 섬유시트가 적용된 적층패턴을 가지고 있으며, Type 3는 프리프레그가 적용된 적층패턴을 가지고 있다. 연구결과에 따르면 Type 1은 Type 2에 비해 베어링 강도가 3.3% 낮게 나타났으며 Type 3가 가장 높은 베어링 강도를 나타내었다. Type 1과 Type 2는 net-tension 모드 파손이, Type 3는 베어링 모드 파손이 나타났으며 Type 3의 음향방출 에너지는 Type 1과 Type 2의 경우에 비해 높게 나타났다. 이로 미루어 보면 Type 3가 구조적으로 가장 안전함을 알 수 있었다.

Keywords

References

  1. Ramirez-Jimenez, C. R., Papadakis, N., Reynolds, N., Gan, T. H., Pirnell, P. and Pharaoh, M., "Identification of Failure Modes in Glass/Polypropylene Composites by Mean of the Primary Frequency Content of the Acoustic Emission Event," Composite Science and Technology, Vol. 64, No. 12, 2004, pp.1819-1827 https://doi.org/10.1016/j.compscitech.2004.01.008
  2. Loutas, T. H., Kostopoulos, V., Ramirez-Jimenez, C. and Pharaoh, M., "Damage Evolution in Center-holed Glass/Polyester Composites under Quasi -static Loading using Time/Frequecny Analysis of Acoustic Emission Monitored Waveforms," Composite Science and Technology, Vol. 66, No. 10, 2006, pp.1366-1375
  3. Bourchak, M., Farrow, I. R., Bond, I. P., Rowland, C. W. and Menan, F., "Acoustic Emission Energy as a Fatigue Damage Parameter for CFRP Composites," International Journal of Fatigue, Vol. 29, No. 3, 2007, pp.457-470 https://doi.org/10.1016/j.ijfatigue.2006.05.009
  4. Pappas, Y. Z., Markopoulos, Y. P. and Kostopoulos, V., "Failure Mechanism Analysis of 2D Carbon/Carbon using Acoustic Emission Monitoring," Independent Nondestructive Testing and Evaluation, Vol. 31, No. 3, 1998, pp.157-163
  5. Oh, J. S., Woo, C. K. and Lee, Z. K., "A Study on the Fracture Behavior of Laminate Carbon/Epoxy Composite by Acoustic Emission," The Korean Society for Machine Tool Engineers, Vol. 19, No. 3, 2010, pp.326-333
  6. Surgeon, M. and Wevers, M., "One Sensor Linear Location of Acoustic Emission Events using Plate Wave Theories," Materials Science and Engineering, Vol. 265, No. 1-2, 1999, pp.254-261 https://doi.org/10.1016/S0921-5093(98)01142-3
  7. Lee, S. H. and Choi, Y. G, "The Structural Integrity Evaluation of Composite Pressure Vessel Using Acoustic Emission," Journal of the Korean Society of Propulsion Engineers, Vol. 1, No. 2, 1997, pp.1-11
  8. ASTM D5961/D 5961M-01, "Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates," American Society for Testing and Materials, Vol. 15.03, 2001
  9. Park, J. S., Kim, K. S. and Lee, H. S., "A Study on the Acoustic Emission Characteristics of Laminated Composite Structures," The Korean Society for Composite Materials, Vol. 16, No. 3, 2003, pp.16-22
  10. Xiao, Y. and Ishikawa, T., "Bearing Strength and Failure Behavior of Bolted Composite Joints (part I: Experimental Investigation)," Composite Science and Technology, Vol. 65, No. 7-8, 2005, pp.1022-1031 https://doi.org/10.1016/j.compscitech.2005.02.011