DOI QR코드

DOI QR Code

A Dry Friction Model to Realize Stick for Simulation of the System with Friction and Accuracy Verification of the Friction Model

마찰력이 작용하는 동적 시스템의 점착 구현을 위한 마찰모델 제안 및 정확성 검증

  • 최찬규 (한양대학교 대학원 기계공학과) ;
  • 유홍희 (한양대학교 기계공학부)
  • Received : 2012.05.18
  • Accepted : 2012.06.12
  • Published : 2012.08.20

Abstract

Friction causes self-excited vibration, stick-slip vibration and any other friction-induced phenomena. That kinds of vibrations cause chatter and squeal. In order to predict such vibrations accurately, employing an accurate friction model is very important because a dynamic behavior of a system with friction is dominantly governed by a friction model. A Coulomb friction model is the most widely known model. Coulomb friction model is useful model to obtain analytical solutions of the system with friction and the model gives relatively good simulation result. However, defining a friction force at a stick state in simulation is hard because of the characteristic itself and a Coulomb friction model is discontinuous function between a static and a dynamic friction coefficient. Therefore, applying the Coulomb friction model to a simulation is not appropriate. In order to resolve these problems, an approximated Coulomb friction model was developed using simple and continuous function. However, an approximated Coulomb friction model cannot realize stick. Therefore, an approximated Coulomb friction model cannot describe friction phenomena accurately. In order to analyze a friction phenomenon accurately, a friction model for a simulation was proposed in this paper. A proposed friction model realizes stick and gives reasonably good results compared to results obtained by the simulation employing an approximated Coulomb friction model. Accuracy of a proposed friction model was verified by comparing experimental results.

Keywords

References

  1. Coulomb, C. A., 1785, Theorie des Machines Simples, en Ayant Egard au Frottement de Leurs Parties et a la Roideur Dews Cordages, Mem. Math Phys. X, pp. 161-342.
  2. Bowden, F. P. and Tabor, D., 1964, The Friction and Lubrication of Solids, Oxford University Press.
  3. Ibrahim, R. A., 1994, Friction-induced Vibration, Chatter, Squeal, and Chaos Part II: Dynamics and Modelling, Applied Mechanics Reviews, Vol. 47, pp. 227-253. https://doi.org/10.1115/1.3111080
  4. Popp, K. and Stelter, P., 1990, Stick-slip Vibrations and Chaos, Philosophical Transactions of the Royal Society of London, Vol. A(332), pp. 89-105.
  5. Capone, G., D'Agostino, V., Valle, S. D. and Guida, D., 1992, Stick-slip Instability Analysis, Meccanica, Vol. 27, pp. 111-118. https://doi.org/10.1007/BF00420589
  6. Hinrichs, N., Oestreich, M. and Popp, K., 1998, On the Modelling of Friction Oscillators, J. Sound Vibration, Vol. 216 , No. 3, pp. 435-459. https://doi.org/10.1006/jsvi.1998.1736
  7. Song, P., Krauss, P., Kumar, V. and Dupont, P., 2001, Analysis of Rigid-body Dynamic Models for Simulation of Systems with Frictional Contacts, J. Appl. Mech., Vol. 68, pp. 118-128. https://doi.org/10.1115/1.1331060
  8. DADS Manual(version 9.6), 2000.
  9. ADAMS/View Manual(version 2003), 2003.
  10. RecurDyn Manual(version 6.2), 2005.
  11. Lee, H. C., Choi, J. H. and Shabana, A. A., 1998, Spatial Dynamics of Multibody Tracked Vehicles: Contact Forces and Simulation Results, International Journal of Vehicle Mechanics and Mobility, Vehicle System Dynamics, Vol. 29, pp. 113-137. https://doi.org/10.1080/00423119808969369

Cited by

  1. Stochastic modeling of friction force and vibration analysis of a mechanical system using the model vol.29, pp.9, 2015, https://doi.org/10.1007/s12206-015-0808-4
  2. Examination of Modeling Methods for Tower Crane Transportation using Multibody Dynamics vol.52, pp.4, 2015, https://doi.org/10.3744/SNAK.2015.52.4.330