DOI QR코드

DOI QR Code

Properties of TiO2 Thin Films Deposited on PET Substrate for High Energy Density Capacitor

고에너지밀도 캐패시터를 위해 PET 기판에 증착한 TiO2 박막의 특성

  • Park, Sang-Shik (School of Nano-Materials Engineering, Kyungpook National University)
  • 박상식 (경북대학교 나노소재공학부)
  • Received : 2012.06.27
  • Accepted : 2012.07.23
  • Published : 2012.08.27

Abstract

$TiO_2$ thin films for high energy density capacitors were prepared by r.f. magnetron sputtering at room temperature. Flexible PET (Polyethylene terephtalate) substrate was used to maintain the structure of the commercial film capacitors. The effects of deposition pressure on the crystallization and electrical properties of $TiO_2$ films were investigated. The crystal structure of $TiO_2$ films deposited on PET substrate at room temperature was unrelated to deposition pressure and showed an amorphous structure unlike that of films on Si substrate. The grain size and surface roughness of films decreased with increasing deposition pressure due to the difference of mean free path. X-ray photoelectron spectroscopy (XPS) analysis revealed the formation of chemically stable $TiO_2$ films. The dielectric constant of $TiO_2$ films was significantly changed with deposition pressure. $TiO_2$ films deposited at low pressure showed high dissipation factor due to the surface microstructure. The dielectric constant and dissipation factor of films deposited at 70 mTorr were found to be 100~120 and 0.83 at 1 kHz, respectively. The temperature dependence of the capacitance of $TiO_2$ films showed the properties of class I ceramic capacitors. $TiO_2$ films deposited at 10~30 mTorr showed dielectric breakdown at applied voltage of 7 V. However, the films of 500~300 nm thickness deposited at 50 and 70 mTorr showed a leakage current of ${\sim}10^{-8}{\sim}10^{-9}$ A at 100 V.

Keywords

References

  1. M. Jayalakshmi and K. Balasubramanian, Int. J. Electrochem. Sci., 3, 1196 (2008).
  2. R. Vazquez-Reina, S. Chao, V. Petrovsky, F. Dogan and S. Greenbaum, J. Power Sourc., 210, 21 (2012). https://doi.org/10.1016/j.jpowsour.2012.02.096
  3. K. R. Bray, R. L. C. Wu, S. Fries-Carr and J. Weimer, Thin Solid Films, 518, 366 (2009). https://doi.org/10.1016/j.tsf.2009.06.052
  4. A. Nishino, J. Power Sourc., 60, 137 (1996). https://doi.org/10.1016/S0378-7753(96)80003-6
  5. S. Chao and F. Dogan, Int. J. Appl. Ceram. Tech., 8(6), 1363 (2011). https://doi.org/10.1111/j.1744-7402.2010.02592.x
  6. C. R. Martins, Y. M. de Almeida, G. C. do Nascimento and W. M. de Azevedo, J. Mater. Sci., 41, 7413 (2006). https://doi.org/10.1007/s10853-006-0795-z
  7. K. N. Pandiyaraj, V. Selvarajan, M. Pavese, P. Falaras and D. Tsoukleris, Curr. Appl. Phys., 9, 1032 (2009). https://doi.org/10.1016/j.cap.2008.11.005
  8. K. O. Awitor, A. Rivaton, J. L. Gardette, A. J. Down and M. B. Johnson, Thin Solid Films, 516, 2286 (2008). https://doi.org/10.1016/j.tsf.2007.08.005
  9. L. T. Lamont and A. Lang, J. Vac. Sci. Tech., 7, 198 (1970). https://doi.org/10.1116/1.1315794
  10. Y. Zhao, Y. Qian, W. Yu and Z. Chen, Thin Solid Films, 286, 45 (1996). https://doi.org/10.1016/S0040-6090(95)08514-9
  11. J. Guillot, F. Fabreguette, L. Imhoff, O. Heintz, M. C. Marco de Lucas, M. Sacilotti, B. Domenichini and S. Bourgeois, Appl. Surf. Sci., 177, 268 (2001). https://doi.org/10.1016/S0169-4332(01)00220-3
  12. J. Jun, J. H. Shin and M. Dhayal, Appl. Surf. Sci., 252, 3871 (2006). https://doi.org/10.1016/j.apsusc.2005.06.004
  13. P. M. Kumar, S. Badrinarayanan and M. Sastry, Thin Solid Films, 358, 122 (2000). https://doi.org/10.1016/S0040-6090(99)00722-1
  14. V. M. Ferreira, J. L. Baptista, S. Kamba and J. Petzelt, J. Mater. Sci., 28, 5894 (1993). https://doi.org/10.1007/BF00365198
  15. M. Takeuchi, T. Itoh and H. Nagasaka, Thin Solid Films, 51, 83 (1978). https://doi.org/10.1016/0040-6090(78)90215-8
  16. M. D. Stamate, Appl. Surf. Sci., 218, 318 (2003). https://doi.org/10.1016/S0169-4332(03)00624-X
  17. R. C. Pullar, S. J. Penn, X. Wang, I. M. Reaney and N. McN. Alford, J. Eur. Ceram. Soc., 29, 419 (2009). https://doi.org/10.1016/j.jeurceramsoc.2008.06.019