DOI QR코드

DOI QR Code

A Study on Impact Damage Characteristics of the Window Glass for High Speed Train

고속열차 객실 유리창 충격파손특성 비교 연구

  • 전창성 (한국철도기술연구원 고속철도연구본부) ;
  • 김영국 (한국철도기술연구원 고속철도연구본부) ;
  • 윤수환 (한국철도기술연구원 고속철도연구본부) ;
  • 권혁빈 (한국철도기술연구원 고속철도연구본부) ;
  • 박태원 (아주대학교 공과대학 기계공학과)
  • Received : 2012.03.21
  • Accepted : 2012.04.21
  • Published : 2012.06.30

Abstract

This study describes an experimental investigation about the impact damage characteristics of various types of high speed train window glass. Kinds of impact test standards for glass were studied and impact test considering scattering ballast were developed. Windows with external impact side made with annealed, heat strengthened and tempered glasses are likely to be broken by sharp tipped falling object. Broken shape of annealed glass is like line in part and that of heat strengthened glass is line on the whole. Tempered glass is destroyed to pieces. The change of tip type from sharp to blunt makes the higher destroyed level. Tempered glass has higher strength than annealed glass with blunt tip. When the protective films are attached to glasses, strength against destruction increases. In case of real ballast test, glasses without protective films were destroyed, but those with protective films are hard to be broken.

고속열차 객실 유리창 타입에 따른 충격 파손 특성을 비교 연구하기 위하여 다양한 종류의 유리창 내충격시험 규격을 검토하였으며, 자갈 비산에 의한 유리창 파손 특성을 고려하여 내충격시험을 실시하였다. 외부 충격면이 일반유리, 반강화유리, 강화유리 모두 팁 끝이 뾰족한 낙하체에 대해 낮은 높이에서도 파괴가 잘 일어났고, 파괴될 때의 양상은 일반유리의 경우 선 파괴가 부분적으로 발생하였고, 반강화유리의 경우 선 파괴가 전체적으로 발생하였으며, 강화유리의 경우 전체적으로 입자가 잘게 부숴지며 파괴되었다. 낙하체 팁 형상을 뾰족한 것에서부터 뭉툭한 것으로 변화시킬 때 더 높은 높이에서 파괴가 일어남을 알 수 있었고, 그 정도는 일반유리보다 강화유리가 팁 끝이 뭉툭한 낙하체에 대해서 더 높은 강도를 가짐을 알 수 있었다. 유리창 보호용 필름이 적용되었을 때 강도 증가의 효과가 있었다. 실제 자갈을 자유 낙하시켜 파손 특성을 비교하였는데, 3가지 경우 모두에 대해서 보호필름이 적용되지 않았을 때는 파괴되었고, 보호필름을 적용하였을 경우에는 잘 파괴되지 않음을 확인할 수 있었다.

Keywords

References

  1. H.J. Lee, D.S. Chang (2009) A Study on the functional transition of Korean rolling stock's window pane, Proceedings of the Korean Society for railway Spring Conference, pp. 323-337.
  2. D.S. Chang, H.J. Lee (2011) A study on the function and application of the glasses for rolling stock, Proceedings of the Korean Society for railway Spring Conference, pp. 1097-1108.
  3. H.B. Kwon, D.S. Chang (2010) A Study on the Window Glass Pressure for High-speed Train, Journal of the Korean Society for railway, 13(4), pp. 371-375.
  4. D.S. Chang, W. Yi (2011) A study on the Pressure Test of the Glass Window for High Speed Train, Journal of the Korean Society for railway, 14(5), pp. 391-397. https://doi.org/10.7782/JKSR.2011.14.5.391
  5. H.B. Kwon, C.S. Park (2005) A Study on the Ballast-flying Phenomena by Strong Wind Induced by High-speed Train, Journal of the Korean Society for Railway, 8(1), pp. 6-14.
  6. J.H Rho, Y.C. Ku, S.H. Yun et al. (2009) Ballast Flying Probability Analysis for Ballast Types and Underbody Flow Conditions, Journal of the Korean Society for Railway, 12(6), pp. 829-834.
  7. Ministry of Land, Transportation and Maritime Affairs (2010) Guidelines for railway safety standards (Notice of Ministry of Land, Transportation and Maritime Affairs 2010-637) [Appendix 18] Detail pane safety standards for railway vehicles.
  8. Railway Safety (2002) Structural requirements for windscreens and windows on railway vehicles, Railway Group Standard, GM/RT2456.
  9. AFNOR (1992) Laminated glass, French Standard, NF F 31- 250.
  10. AFNOR (1993) Toughened safety-glass panels, French Standard, NF F 31-129.
  11. Korean Agency for Technology and Standards (2009) Laminated glass, KS L 2004 : 2009.
  12. Korean Agency for Technology and Standards (2006) Tempered glass, KS L 2002 : 2006.
  13. Korean Agency for Technology and Standards (2008) Automotive safety glass, KS L 2007 : 2008.
  14. Hankuk Glass Industries Inc. (2007) Articles on HanGlas architectural glass.

Cited by

  1. A Study on Impact Testing of a Rolling-stock Windscreen vol.16, pp.5, 2013, https://doi.org/10.7782/JKSR.2013.16.5.365