한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제29권11호
  • /
  • Pages.1190-1198
  • /
  • 2012
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지
DOI QR코드

DOI QR Code

격자형 금형의 냉각효과를 고려한 구형 LNG 탱크용 대형 알루미늄 후판의 열간성형해석

FE-Analysis of Hot Forming of Al Large Thick Plate for Spherical LNG Tank Considering Cooling Performance of Grid-Typed Die

  • 이정민 (한국생산기술연구원 동남권지역본부) ;
  • 이인규 (부산대학교 하이브리드 소재솔루션협동과정) ;
  • 김대순 (현대중공업 산업기술소) ;
  • 권일근 (현대중공업 산업기술소) ;
  • 이선봉 (계명대학교 기계자동차공학과) ;
  • 김병민 (부산대학교 기계공학부)
  • Lee, Jung-Min (Dongnam Regional Division, Kitech) ;
  • Lee, In-Kyu (National Core Research Center, Pusan National Univ.) ;
  • Kim, Dae-Soon (Industrial Technology Division, Hyundai Heavy Industries) ;
  • Kwon, Il-Keun (Industrial Technology Division, Hyundai Heavy Industries) ;
  • Lee, Seon-Bong (Faculty of Mechanical and Automotive Engineering, Keimyung Univ.) ;
  • Kim, Byung-Min (Department of Mechanical Engineering, Pusan National Univ.)
  • 투고 : 2011.09.02
  • 심사 : 2012.03.19
  • 발행 : 2012.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A hot forming of large thick Al plate using a grid-type hybrid die is a process to make a shell plate for the production of a spherical LNG tank. This process is characterized by using a grid-typed die with an additional air cooling system for reducing the cooling time of the heated plate after hot forming. The process consists of the plate's feeding, heating, forming and cooling in detail and each of them is continuously performed along the rail. This paper was designed to propose the analytical and experimental methods for determining the convection and interfacial heat transfer coefficients required in hot forming analysis of Al plate. These values in the analysis are to reproduce numerically the cooling performance of grid-typed die and cooling device. Interfacial heat transfer was obtained from the heat transfer experiments for different pressures and inverse analysis method. To verify the efficiency of the coefficient values obtained from above methods, FE analysis and experiment of the hot spherical-forming process were conducted for a small-scaled model. The convection coefficient was also calculated from flow analysis of air released by cooling device within grid-typed die using ANSYS-CFX.

키워드

참고문헌

  1. Anttila, J., Gustafsson, J., Heinakari, M., Linja, J., and Vaihinen, M., "Spherical LNG-tank and a production method for such a tank," US Patent, No. 5529239, 1996.
  2. Baysinger, F. R., "Liquefied natural gas tank construction," US Patent, No. 4182235, 1979.
  3. Kim, H. Y., Kim, C. Y., Choo, W. Y., and Chang, R. W., "Analysis of Stress and Distortion that Develop during Accelerated Cooling of Plate," Transactions of the Korean Society of Mechanical Engineers, Vol. 12, No. 5, pp. 952-958, 1988.
  4. Oliphant, K., Webb, B. W., and McQuay, M. Q., "An experimental comparison of liquid jet array and spray impingement cooling in the non-boiling regime," Experimental Thermal and Fluid Science, Vol. 18, pp. 1-10, 1998. https://doi.org/10.1016/S0894-1777(98)10013-4
  5. Lee, I. K., Lee, J. M., Son, Y. K., Lee, C. J., and Kim, B. M., "Experimental and Fe Analyses of Hot Curvature-Forming for Aluminum Thick Plate Using Grid-Typed Hybrid Die," Transactions of Materials Processing, Vol. 20, No. 4, pp. 316-323, 2011. https://doi.org/10.5228/KSTP.2011.20.4.316
  6. Hwang, S. J., Ko, D. H., Kim, D. H., and Kim, B. M., "Temperature Prediction of Al6061 Tube in Cryogenic Heat Treatment by CFD Analysis and Experimental Verification," J. of the KSPE, Vol. 28, No. 10, pp. 1210-1216, 2011.
  7. Jeong, D. J., "Influence of the Dimensional Accuracy by Friction Shear Factor of Lubricants and Methods in Worm Forged Products," M.Sc. Thesis, Department of Mechanical Design Engineering, Pusan National University, 2001.
  8. ANSYS, "ANSYS CFX Turbulence Model Manual, Ver. 12.0," 2010.
  9. Kwon, J. W., Lee, J. H., Lee, Y. S., Kwon, Y. N., and Bae, W. B., "A Study of Interface Heat Transfer Coefficient Between Die and Workpiece for Hot Forging," Transactions of Materials Processing, Vol. 14, No. 5, pp. 460-465, 2005. https://doi.org/10.5228/KSPP.2005.14.5.460
  10. Davis, J. R., "Aluminum and aluminum alloys, 3rd ed.," The Materials Information Society, pp. 675-676, 1993.
  11. MatWeb, "AISI H13 Hot Work Tool Steel," www.matweb.com
  12. Xie, J. X., Murakami, T., Takahashi, H., and Ikeda, K., "Theoretical Analysis on Fabrication Process of Pipe by Multi-Billet Extrusion," Journal of the JSPT, Vol. 34, pp. 823-829, 1993.